Current Noncompliance TX 1 HEALTH VIOLATION

City of Beasley

EPA ID: TX0790014 ยท 977 people served ยท 1 ZIP code

ZipCheckup's reading of EPA SDWIS for City of Beasley (TX0790014): 3 unresolved EPA violations on record. Current EPA status: City of Beasley, 3 open violations, 977 people served.

Data: EPA SDWIS

977
People Served
1
ZIP Code Served
11
Violations (5yr)
Groundwater
Water Source
0.0018 mg/L
Max Lead Level
4
Contaminants Flagged
$156K
Median Home Value in Service Area

Service Area Map

Coverage area for City of Beasley Source: EPA SDWIS service area boundaries.

Service area boundary

Service Area Demographics

$60,809
Median Household Income
3,232
Service Area Population
25%
Disadvantaged Population
30th
Poverty Percentile
20th
Energy Burden Percentile
66%
Pre-1986 Housing

The City of Beasley serves a community with a median household income of $60,809 and an estimated 3,232 residents across its service area. Approximately 66% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

๐Ÿ’ง Where Does Your Water Come From?

Groundwater

City of Beasley's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
70th
Wastewater Discharge Proximity
50th
Superfund Site Proximity

Wastewater Proximity Note: This service area ranks in the 70th percentile nationally for proximity to wastewater discharge points.

Infrastructure Risk

54 yr
Avg Pipe Age
Copper
Pipe Material
16 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 77% of expected lifespan used End of life

Detected Contaminants

How City of Beasley compares to EPA limits

What This Means For You

Lead and Copper Rule at 4 mg/L exceeds the EPA maximum of mg/L.

Stage 1 DBP Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Revised Total Coliform Rule at 2 presence exceeds the EPA maximum of presence.

Comparable Water Systems

Similar-sized systems in Texas

4 violations
City of Thrall
975 people
2 violations
City of Wortham
980 people
3 violations
City of Ector
981 people
8 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Water Filtration
Flood Insurance $1,800
Water Filtration $300
Total Estimated Cost $2,100

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$5,000
10 years
$10,000
20 years
$20,000

Compare: Estimated remediation cost is $2,100 (one-time) vs. $10,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

City of Beasley (EPA ID: TX0790014) is a community water system in Texas that serves approximately 977 people from groundwater sources.

This system serves ZIP code 77417 in Beasley.

Violation History

3 current noncompliance records in the accepted 2026Q2 snapshot; none are classified as health-based in this evidence.

Status breakdown for accepted records with record years 2021-2026: 8 resolved, 0 archived, 0 addressed, and 3 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
April 16, 2026 Lead and Copper Rule Non-health-based Unaddressed (current)
December 30, 2025 Stage 1 DBP Rule Non-health-based Unaddressed (current)
October 1, 2025 Revised Total Coliform Rule Non-health-based Resolved
September 20, 2025 Lead and Copper Rule Non-health-based Resolved
May 15, 2025 Lead and Copper Rule Non-health-based Unaddressed (current)
October 17, 2024 Stage 2 DBP Rule Health-based Resolved
October 17, 2024 Stage 2 DBP Rule Non-health-based Resolved
April 1, 2024 Revised Total Coliform Rule Non-health-based Resolved
December 30, 2022 Stage 1 DBP Rule Non-health-based Resolved
December 19, 2022 Lead and Copper Rule Non-health-based Resolved
October 1, 2021 Stage 1 DBP Rule Non-health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Lead and Copper Rule Treatment Failure 4 No
Stage 1 DBP Rule Treatment Failure 3 No
Stage 2 DBP Rule Treatment Failure 2 Yes
Revised Total Coliform Rule Microbiological 2 No

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0.0018 mg/L No N/A

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking โ€” this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Beasley (TX0790014) on EPA.gov.

Frequently Asked Questions

Is City of Beasley water safe to drink?

The accepted 2026Q2 ECHO snapshot shows 3 current noncompliance records and zero current records classified as health-based. That classification is not a property-specific water test or safety guarantee.

How many people does City of Beasley serve?

City of Beasley serves approximately 977 people across 1 ZIP code in Texas.

Where does City of Beasley get its water?

The primary water source is groundwater.

Frequently Asked Questions

What contaminants are in City of Beasley's water?
Detected contaminants include Lead and Copper Rule, Stage 1 DBP Rule, Stage 2 DBP Rule, Revised Total Coliform Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 4 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Beasley serve?
City of Beasley serves approximately 977 people with drinking water across 1 ZIP code.
What is City of Beasley's water source?
City of Beasley draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Beasley's water?
The maximum detected lead level is 0.0018 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Beasley's service area?
The City of Beasley service area has a median household income of $60,809. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does City of Beasley get its water?
City of Beasley's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on the exported violation history and environmental factors, the source contamination risk is classified as elevated.

How to cite this page

APA ZipCheckup. (n.d.). City of Beasley (TX): 1 Health Violation. https://zipcheckup.com/water-system/tx0790014/
BibTeX
@misc{zipcheckup-water-system-tx0790014,
  author = {{ZipCheckup}},
  title  = {{City of Beasley (TX): 1 Health Violation}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/tx0790014/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

City of Beasley (EPA ID: TX0790014) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas City of Beasley

Get safety alerts for City of Beasley, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.