Historical Compliance Records TX

Mountain Peak Special Utility District

EPA ID: TX0700042 ยท 23,988 people served ยท 4 ZIP codes

ZipCheckup's reading of EPA SDWIS for Mountain Peak Special Utility District (TX0700042): 1 EPA violation in the last five years. Even though Mountain Peak Special Utility District accumulated 1 violation over five years, all have been formally resolved - the provider currently meets EPA standards for 23,988 people.

Data: EPA SDWIS

B ยท 76
Avg Safety Score
23,988
People Served
4
ZIP Codes Served
1
Violations (5yr)
Surface Water
Water Source
0.00198 mg/L
Max Lead Level
Zone 3
Radon Risk ยท Low
1
Contaminants Flagged
$286K
Median Home Value in Service Area

Service Area Map

Coverage area for Mountain Peak Special Utility District Source: EPA SDWIS service area boundaries.

Service area boundary - Grade B

Service Area Demographics

$96,562
Median Household Income
68,240
Service Area Population
28%
Disadvantaged Population
40th
Poverty Percentile
50th
Energy Burden Percentile
32%
Pre-1986 Housing

The Mountain Peak Special Utility District serves a community with a median household income of $96,562 and an estimated 68,240 residents across its service area.

๐ŸŒŠ Where Does Your Water Come From?

Surface Water

Mountain Peak Special Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
35th
Wastewater Discharge Proximity
25th
Superfund Site Proximity

Infrastructure Risk

29 yr
Avg Pipe Age
Copper
Pipe Material
39 yr
Est. Remaining Life
Stable
Decay Status
Installed 43% of expected lifespan used End of life

Detected Contaminants

How Mountain Peak Special Utility District compares to EPA limits

What This Means For You

Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 23 detections recorded. 5 exceed federal EPA limits (4 ppt for PFOA/PFOS). 1 exceeds state limits.

State limits: PFOA: 0.07 ppt, PFOS: 0.07 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter โ†’

Comparable Water Systems

Similar-sized systems in Texas

City of Anna
23,960 people
B 13 violations
City of Saginaw
23,890 people
2 violations
City of Watauga
23,806 people
A 0 violations
City of San Benito
24,250 people
C 1 violation

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment
Flood Insurance $1,050
PFAS Treatment $600
Total Estimated Cost $1,650

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure - Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $1,650 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Mountain Peak Special Utility District (EPA ID: TX0700042) is a community water system in Texas that serves approximately 23,988 people from surface water sources.

This system provides water to 4 ZIP codes across 4 communities.

ZIP-Area Home Safety Context: B (76/100)

This is the average Home Safety Score for 1 of 4 service-area ZIP codes with all required score domains observed. It is not a grade for the water utility.

Model 4.0.0 uses SDWIS identity plus accepted ECHO SDWA lifecycle-based water compliance, the UCMR 5 PFAS MCL screen, EPA radon zone, and annual EPA AirData AQI across three equally weighted domains. Missing required evidence suppresses the score.

Violation History

No current noncompliance in the accepted 2026Q2 snapshot. The 1 record in the 2021-2026 window are classified as resolved or archived, not current.

Status breakdown for accepted records with record years 2021-2026: 1 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
July 2, 2025 Stage 2 DBP Rule Non-health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 2 DBP Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0.00198 mg/L No N/A

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking โ€” this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Mountain Peak Special Utility District (TX0700042) on EPA.gov.

Frequently Asked Questions

Is Mountain Peak Special Utility District water safe to drink?

The accepted 2026Q2 ECHO snapshot shows no current noncompliance for Mountain Peak Special Utility District; its 1 accepted 2021-2026 record are resolved or archived. Historical compliance status does not establish conditions at a specific tap.

How many people does Mountain Peak Special Utility District serve?

Mountain Peak Special Utility District serves approximately 23,988 people across 4 ZIP codes in Texas.

Where does Mountain Peak Special Utility District get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
464
Detections
19
Latest sample
12/5/2024
Highest analyte
PFBA: 9.7 ppt
Analyte Max detected Current MCL Status
PFBA 9.7 ppt โ€” โ€”
PFPeA 7.2 ppt โ€” โ€”
PFOS 6.2 ppt 10 ppt Above 2029 federal MCL
PFHxA 6.1 ppt โ€” โ€”
PFBS 3.4 ppt โ€” โ€”

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) โ€” per-system federal sampling, 2023โ€“2025. EPA UCMR5 monitoring program โ†’

Understand PFAS health context and filtration โ†’

Frequently Asked Questions

Is water from Mountain Peak Special Utility District safe to drink?
Mountain Peak Special Utility District earns a B safety grade with 1 violation in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Mountain Peak Special Utility District's water?
Detected contaminants include Stage 2 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Mountain Peak Special Utility District serve?
Mountain Peak Special Utility District serves approximately 23,988 people with drinking water across 4 ZIP codes.
What is Mountain Peak Special Utility District's water source?
Mountain Peak Special Utility District draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Mountain Peak Special Utility District's water?
The maximum detected lead level is 0.00198 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Mountain Peak Special Utility District's service area?
The Mountain Peak Special Utility District service area has a median household income of $96,562. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Mountain Peak Special Utility District get its water?
Mountain Peak Special Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

How to cite this page

APA ZipCheckup. (n.d.). Mountain Peak Special Utility District (TX): 1 EPA Violation. https://zipcheckup.com/water-system/tx0700042/
BibTeX
@misc{zipcheckup-water-system-tx0700042,
  author = {{ZipCheckup}},
  title  = {{Mountain Peak Special Utility District (TX): 1 EPA Violation}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/tx0700042/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

Mountain Peak Special Utility District (EPA ID: TX0700042) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas Mountain Peak Special Utility District

Get safety alerts for Mountain Peak Special Utility District, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.