City of Milford
EPA ID: TX0700006 · 796 people served · 2 ZIP codes
ZipCheckup's reading of EPA SDWIS for City of Milford (TX0700006): 1 past health-based violation, since resolved. Federal water data for City of Milford logs 14 historical violations - all addressed and cleared, leaving the utility in current compliance for 796 people.
Data: EPA SDWIS
Service Area Map
Coverage area for City of Milford Source: EPA SDWIS service area boundaries.
Service area boundary
Service Area Demographics
The City of Milford serves a community with a median household income of $64,406 and an estimated 5,992 residents across its service area. Approximately 55% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
🌊 Where Does Your Water Come From?
City of Milford's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
Infrastructure Risk
Detected Contaminants
How City of Milford compares to EPA limits
What This Means For You
Lead and Copper Rule at 6 mg/L exceeds the EPA maximum of mg/L.
Stage 1 DBP Rule at 3 mg/L exceeds the EPA maximum of mg/L.
Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Consumer Confidence Report Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Comparable Water Systems
Similar-sized systems in Texas
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
City of Milford (EPA ID: TX0700006) is a community water system in Texas that serves approximately 796 people from surface water sources.
This system provides water to 2 ZIP codes across 2 communities.
Violation History
Status breakdown for accepted records with record years 2021-2026: 14 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 1, 2025 | Consumer Confidence Report Rule | Non-health-based | Resolved |
| June 30, 2025 | Lead and Copper Rule | Non-health-based | Resolved |
| January 18, 2025 | Lead and Copper Rule | Non-health-based | Resolved |
| October 17, 2024 | Stage 2 DBP Rule | Health-based | Resolved |
| October 17, 2024 | Stage 2 DBP Rule | Non-health-based | Resolved |
| October 1, 2023 | Stage 1 DBP Rule | Non-health-based | Resolved |
| July 1, 2023 | Surface Water Treatment Rule | Non-health-based | Resolved |
| September 29, 2022 | Stage 1 DBP Rule | Non-health-based | Resolved |
| June 1, 2022 | Lead and Copper Rule | Non-health-based | Resolved |
| December 23, 2021 | Lead and Copper Rule | Non-health-based | Resolved |
| October 1, 2021 | Stage 1 DBP Rule | Non-health-based | Resolved |
| October 1, 2021 | Lead and Copper Rule | Non-health-based | Resolved |
| May 1, 2021 | Consumer Confidence Report Rule | Non-health-based | Resolved |
| March 15, 2021 | Lead and Copper Rule | Non-health-based | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Lead and Copper Rule | Treatment Failure | 6 | No |
| Stage 1 DBP Rule | Treatment Failure | 3 | No |
| Stage 2 DBP Rule | Treatment Failure | 2 | Yes |
| Consumer Confidence Report Rule | Reporting Failure | 2 | No |
| Surface Water Treatment Rule | Treatment Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule evidence attributed directly to this water system:
| Lead Level | Exceeds Action Level | Sample Date |
|---|---|---|
| 0.00411 mg/L | No | N/A |
No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Milford (TX0700006) on EPA.gov.
Frequently Asked Questions
Is City of Milford water safe to drink?
The accepted 2026Q2 ECHO snapshot shows no current noncompliance for City of Milford; its 14 accepted 2021-2026 records are resolved or archived. Historical compliance status does not establish conditions at a specific tap.
How many people does City of Milford serve?
City of Milford serves approximately 796 people across 2 ZIP codes in Texas.
Where does City of Milford get its water?
The primary water source is surface water.
Frequently Asked Questions
How to cite this page
ZipCheckup. (n.d.). City of Milford (TX): 1 Health Violation. https://zipcheckup.com/water-system/tx0700006/
@misc{zipcheckup-water-system-tx0700006,
author = {{ZipCheckup}},
title = {{City of Milford (TX): 1 Health Violation}},
year = {n.d.},
url = {https://zipcheckup.com/water-system/tx0700006/}
}
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
City of Milford (EPA ID: TX0700006) - request the latest Consumer Confidence Report or ask about specific contaminants.