Monitoring Violations TX

City of Midlothian

EPA ID: TX0700005 · 27,699 people served · 6 ZIP codes

Unlike fully compliant utilities, City of Midlothian has 2 outstanding EPA violations for approximately 27,699 residents.

Data: EPA SDWIS Last verified: 2026-04-02

A · 87
Avg Safety Score
27,699
People Served
6
ZIP Codes Served
3
Violations (5yr)
Surface Water
Water Source
0.00168 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
3
Contaminants Flagged
$307K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 4 (2023) to 5 (2024). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for City of Midlothian Source: EPA SDWIS service area boundaries.

Service area boundary — Grade A

Service Area Demographics

$98,162
Median Household Income
173,896
Service Area Population
27%
Disadvantaged Population
38th
Poverty Percentile
50th
Energy Burden Percentile
29%
Pre-1986 Housing

The City of Midlothian serves a community with a median household income of $98,162 and an estimated 173,896 residents across its service area.

🌊 Where Does Your Water Come From?

Surface Water

City of Midlothian's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
35th
Wastewater Discharge Proximity
33th
Superfund Site Proximity

About 1% of homes in Dallas County, Texas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

28 yr
Avg Pipe Age
Copper
Pipe Material
40 yr
Est. Remaining Life
Stable
Decay Status
Installed 41% of expected lifespan used End of life

Detected Contaminants

How City of Midlothian compares to EPA limits

What This Means For You

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 35 detections recorded. 7 exceed federal EPA limits (4 ppt for PFOA/PFOS). 2 exceed state limits.

State limits: PFOA: 0.07 ppt, PFOS: 0.07 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Texas

City of Denison
27,500 people
A 2 violations
City of Angleton
27,333 people
B 19 violations
City of Lake Jackson
27,314 people
B 6 violations
City of Big Spring
27,282 people
C 22 violations
C 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment Water Filtration
Flood Insurance $1,417
PFAS Treatment $583
Water Filtration $50
Total Estimated Cost $2,050

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,050 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

City of Midlothian (EPA ID: TX0700005) is a community water system in Texas that serves approximately 27,699 people from surface water sources.

This system provides water to 6 ZIP codes across 6 communities.

Average Home Safety Score: A (87/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

3 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
December 30, 2023 Stage 1 DBP Rule Monitoring Resolved
July 1, 2023 Surface Water Treatment Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 1 No
Surface Water Treatment Rule Treatment Failure 1 No
Lead and Copper Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
76065 0.00168 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Midlothian (TX0700005) on EPA.gov.

Frequently Asked Questions

Is City of Midlothian water safe to drink?

City of Midlothian has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does City of Midlothian serve?

City of Midlothian serves approximately 27,699 people across 6 ZIP codes in Texas.

Where does City of Midlothian get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(972) 775-6663
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from CITY OF MIDLOTHIAN Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Purchased from another utility
Treated water purchased wholesale from another water system.
Disinfectant used
Chloramines

Source: CITY OF MIDLOTHIAN Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from CITY OF MIDLOTHIAN Consumer Confidence Report:
TCEQ completed an assessment of your source water, and results indicate that some of our sources are susceptible to certain contaminants. The sampling requirements for your water system is based on this susceptibility and previous sample data.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment classification and chemical list sourced from CITY OF MIDLOTHIAN Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
207
Detections
26
Latest sample
11/11/2024
Highest analyte
PFBA: 12.4 ppt
Analyte Max detected Current MCL Status
PFBA 12.4 ppt
PFPeA 10.1 ppt
PFHxA 9 ppt
PFBS 4.9 ppt
PFOA 4.8 ppt 10 ppt Above 2029 federal MCL
PFHpA 3.9 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
35
Galvanized — Replacement Required
0
Unknown Material
1,403
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 27,699
Reported to Texas

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from City of Midlothian safe to drink?
City of Midlothian earns a A safety grade with 3 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in City of Midlothian's water?
Detected contaminants include Stage 1 DBP Rule, Surface Water Treatment Rule, Lead and Copper Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Midlothian serve?
City of Midlothian serves approximately 27,699 people with drinking water across 6 ZIP codes.
What is City of Midlothian's water source?
City of Midlothian draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Midlothian's water?
The maximum detected lead level is 0.00168 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Midlothian's service area?
The City of Midlothian service area has a median household income of $98,162. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does City of Midlothian get its water?
City of Midlothian's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

City of Midlothian (EPA ID: TX0700005) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas City of Midlothian

Get safety alerts for City of Midlothian, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.