Monitoring Violations TX

City of Princeton

EPA ID: TX0430008 · 37,019 people served · 3 ZIP codes

Despite the 3 historical violations in its record, City of Princeton has cleared every one and now meets EPA standards serving 37,019 residents.

Data: EPA SDWIS Last verified: 2026-04-02

A · 94
Avg Safety Score
37,019
People Served
3
ZIP Codes Served
3
Violations (5yr)
Surface Water
Water Source
0.00216 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
3
Contaminants Flagged
$414K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 3 (2024) to 3 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for City of Princeton Source: EPA SDWIS service area boundaries.

Service area boundary — Grade A

Service Area Demographics

$92,076
Median Household Income
137,659
Service Area Population
7%
Disadvantaged Population
20th
Poverty Percentile
20th
Energy Burden Percentile
22%
Pre-1986 Housing

The City of Princeton serves a community with a median household income of $92,076 and an estimated 137,659 residents across its service area.

🌊 Where Does Your Water Come From?

Surface Water

City of Princeton's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
20th
Superfund Site Proximity

About 1% of homes in Collin County, Texas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

27 yr
Avg Pipe Age
PEX or Copper
Pipe Material
40 yr
Est. Remaining Life
Stable
Decay Status
Installed 40% of expected lifespan used End of life

Detected Contaminants

How City of Princeton compares to EPA limits

What This Means For You

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 4 detections recorded.

State limits: PFOA: 0.07 ppt, PFOS: 0.07 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Texas

B 51 violations
City of Copperas Cove
37,225 people
A 1 violation
0 violations
City of La Porte
36,569 people
B 2 violations
B 6 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment
Flood Insurance $1,400
PFAS Treatment $500
Total Estimated Cost $1,900

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $1,900 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

City of Princeton (EPA ID: TX0430008) is a community water system in Texas that serves approximately 37,019 people from surface water sources.

This system provides water to 3 ZIP codes across 2 communities.

Average Home Safety Score: A (94/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

3 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
September 1, 2024 Lead and Copper Rule Monitoring Resolved
October 1, 2023 Stage 1 DBP Rule Monitoring Resolved
August 1, 2023 Consumer Confidence Report Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 1 No
Lead and Copper Rule Treatment Failure 1 No
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
75407 0.00216 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TX or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Princeton (TX0430008) on EPA.gov.

Frequently Asked Questions

Is City of Princeton water safe to drink?

City of Princeton has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does City of Princeton serve?

City of Princeton serves approximately 37,019 people across 3 ZIP codes in Texas.

Where does City of Princeton get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
763-389-2252
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from Princeton Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine

Source: Princeton Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment classification and chemical list sourced from Princeton Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
87
Detections
1
Latest sample
9/17/2025
Highest analyte
PFBA: 5.2 ppt
Analyte Max detected Current MCL Status
PFBA 5.2 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

PFAS Substances Detected in This System

This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.

Substance Detected level EPA limit Status
PFAS
Not yet EPA-regulated
Not disclosed No federal limit set

In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →

Source: Consumer Confidence Report disclosed by Princeton.

ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.

Learn more about PFAS health effects and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
2,283
Unknown Material
10,203
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 37,019
Reported to Texas

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from City of Princeton safe to drink?
City of Princeton earns a A safety grade with 3 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in City of Princeton's water?
Detected contaminants include Stage 1 DBP Rule, Lead and Copper Rule, Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Princeton serve?
City of Princeton serves approximately 37,019 people with drinking water across 3 ZIP codes.
What is City of Princeton's water source?
City of Princeton draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Princeton's water?
The maximum detected lead level is 0.00216 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Princeton's service area?
The City of Princeton service area has a median household income of $92,076. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does City of Princeton get its water?
City of Princeton's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

City of Princeton (EPA ID: TX0430008) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Texas City of Princeton

Get safety alerts for City of Princeton, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.