Monitoring Violations TN

Plateau Utility District

EPA ID: TN0000729 · 12,074 people served · 5 ZIP codes

Looking at the EPA enforcement file for Plateau Utility District, 1 violation are listed as unresolved — those findings cover the utility's service area of approximately 12,074 people and remain open in the federal compliance system, awaiting formal corrective action documentation.

Data: EPA SDWIS Last verified: 2026-04-02

B · 80
Avg Safety Score
12,074
People Served
5
ZIP Codes Served
1
Violations (5yr)
Surface Water
Water Source
0.001 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
1
Contaminants Flagged
$149K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 4 (2022) to 1 (2024). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Plateau Utility District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$56,375
Median Household Income
41,049
Service Area Population
80%
Disadvantaged Population
72th
Poverty Percentile
66th
Energy Burden Percentile
59%
Pre-1986 Housing

The Plateau Utility District serves a community with a median household income of $56,375 and an estimated 41,049 residents across its service area. Approximately 59% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 80% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Plateau Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
26th
Wastewater Discharge Proximity
58th
Superfund Site Proximity

About 1% of homes in Roane County, Tennessee rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

45 yr
Avg Pipe Age
Copper
Pipe Material
25 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 64% of expected lifespan used End of life

Detected Contaminants

How Plateau Utility District compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 4 detections recorded.

State limits: PFOA: 0.004 ppt, PFOS: 0.004 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Tennessee

B 6 violations
Martin Water Department
11,918 people
A 0 violations
South Cumberland U.d.
12,233 people
0 violations
C 0 violations
Hohenwald Water System
12,475 people
C 5 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,080
Radon Mitigation $720
PFAS Treatment $400
Water Filtration $60
Total Estimated Cost $2,260

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,260 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

PLATEAU UTILITY DISTRICT (EPA ID: TN0000729) is a community water system in Tennessee that serves approximately 12,074 people from surface water sources.

This system provides water to 5 ZIP codes across 5 communities.

Average Home Safety Score: B (80/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 monitoring/reporting violation recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2024 Surface Water Treatment Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
37887 0.001 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TN or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Plateau Utility District (TN0000729) on EPA.gov.

Frequently Asked Questions

Is Plateau Utility District water safe to drink?

Plateau Utility District has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Plateau Utility District serve?

Plateau Utility District serves approximately 12,074 people across 5 ZIP codes in Tennessee.

Where does Plateau Utility District get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
348
Detections
1
Latest sample
11/7/2023
Highest analyte
PFBA: 6 ppt
Analyte Max detected Current MCL Status
PFBA 6 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
4,783
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 12,074
Reported to Tennessee

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Plateau Utility District safe to drink?
Plateau Utility District earns a B safety grade with 1 violation in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Plateau Utility District's water?
Detected contaminants include Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Plateau Utility District serve?
Plateau Utility District serves approximately 12,074 people with drinking water across 5 ZIP codes.
What is Plateau Utility District's water source?
Plateau Utility District draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Plateau Utility District's water?
The maximum detected lead level is 0.001 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Plateau Utility District's service area?
The Plateau Utility District service area has a median household income of $56,375. EPA EJScreen data classifies 80% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Plateau Utility District get its water?
Plateau Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Plateau Utility District (EPA ID: TN0000729) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Tennessee Plateau Utility District

Get safety alerts for Plateau Utility District, Tennessee

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.