Knox-chapman Utility District
EPA ID: TN0000367 · 41,311 people served · 36 ZIP codes
Five clean years on EPA record — Knox-chapman Utility District, 41,311 residents served.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for Knox-chapman Utility District Source: EPA SDWIS service area boundaries.
Service area boundary — Grade D
Service Area Demographics
The Knox-chapman Utility District serves a community with a median household income of $66,490 and an estimated 535,464 residents across its service area. Approximately 51% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
🌊 Where Does Your Water Come From?
Knox-chapman Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 1% of homes in Blount County, Tennessee rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 22 detections recorded.
Comparable Water Systems
Similar-sized systems in Tennessee
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Knox-chapman Utility District (EPA ID: TN0000367) is a community water system in Tennessee that serves approximately 41,311 people from surface water sources.
This system provides water to 36 ZIP codes across 6 communities.
Average Home Safety Score: D (40/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Lead & Copper
No Lead and Copper Rule sampling data available for this water system.
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: 6 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 30 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.
This system serves 36 ZIP codes:
37804 · 37853 · 37865 · 37876 · 37886 37901 · 37902 · 37909 · 37912 · 37914 37915 · 37916 · 37917 · 37918 · 37919 37920 · 37921 · 37922 · 37923 · 37924 37927 · 37928 · 37929 · 37930 · 37931 37932 · 37933 · 37934 · 37938 · 37939 37940 · 37950 · 37995 · 37996 · 37997 37998
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Knox-chapman Utility District (TN0000367) on EPA.gov.
Frequently Asked Questions
Is Knox-chapman Utility District water safe to drink?
Based on EPA records, Knox-chapman Utility District has no recorded violations in the past 5 years — a positive indicator of water quality management.
How many people does Knox-chapman Utility District serve?
Knox-chapman Utility District serves approximately 41,311 people across 36 ZIP codes in Tennessee.
Where does Knox-chapman Utility District get its water?
The primary water source is surface water.
Contact Your Water Utility
Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.
Contact information from Knox Chapman Utility District Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Water Source & Treatment
Where this water originates and how it's treated before reaching your tap.
Source: Knox Chapman Utility District Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.
The Tennessee Department of Environment and Conservation (TDEC) prepared a Source Water Assessment Program (SWAP) Report for the untreated water sources serving this system. The water was rated as reasonably susceptible to potential contamination.
Treatment regime
How this utility classifies its treatment process and what each reported treatment chemical does.
Treatment chemicals and what each one does
Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.
Watershed exposure sources reported
Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.
Treatment classification and chemical list sourced from Knox Chapman Utility District Consumer Confidence Report.
Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Notable events and violations
This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.
Federal compliance violations on record
These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).
-
monitoring · Total Haloacetic Acids and Total Trihalomethanes2024-05-08
The utility failed to monitor for Total Haloacetic Acids (HAA5) and Total Trihalomethanes (TTHM) during the scheduled May 8, 2024 sampling period due to incorrect scheduling. Samples were taken on April 9, 2024 instead.
Violations record from Knox Chapman Utility District Consumer Confidence Report.
Notable events from the utility's CCR
These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.
- Monitoring violation for Total Haloacetic Acids and Total Trihalomethanes due to incorrect sampling schedule (taken April 9, 2024 instead of May 8, 2024)
ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.
How Water Systems Appear in Rankings
Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.
- #32 / 50 Highest Exposure Burden (Tennessee)
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Knox-chapman Utility District (EPA ID: TN0000367) — request the latest Consumer Confidence Report or ask about specific contaminants.