Bean Station Utility District
EPA ID: TN0000041 · 10,378 people served · 5 ZIP codes
Although 3 violations appeared on Bean Station Utility District's record, all have been remedied — currently compliant, 10,378 served.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Stable · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 6 (2022) to 3 (2025). Violation counts have remained relatively steady.
Service Area Map
Coverage area for Bean Station Utility District Source: EPA SDWIS service area boundaries.
Service area boundary — Grade D
Service Area Demographics
The Bean Station Utility District serves a community with a median household income of $45,331 and an estimated 41,281 residents across its service area. Approximately 46% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 88% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
🌊 Where Does Your Water Come From?
Bean Station Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 1% of homes in Grainger County, Tennessee rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Wastewater Proximity Note: This service area ranks in the 74th percentile nationally for proximity to wastewater discharge points. Surface water sources near wastewater outfalls may face additional treatment challenges.
Infrastructure Risk
Detected Contaminants
How Bean Station Utility District compares to EPA limits
What This Means For You
Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Revised Total Coliform Rule at 1 presence exceeds the EPA maximum of presence.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 11 detections recorded. 1 exceeds federal EPA limits (4 ppt for PFOA/PFOS). 1 exceeds state limits.
Comparable Water Systems
Similar-sized systems in Tennessee
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Bean Station Utility District (EPA ID: TN0000041) is a community water system in Tennessee that serves approximately 10,378 people from surface water sources.
This system provides water to 5 ZIP codes across 5 communities.
Average Home Safety Score: D (53/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| November 1, 2023 | Consumer Confidence Report Rule | Monitoring | Resolved |
| October 1, 2023 | Revised Total Coliform Rule | Monitoring | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Surface Water Treatment Rule | Treatment Failure | 1 | No |
| Consumer Confidence Report Rule | Reporting Failure | 1 | No |
| Revised Total Coliform Rule | Microbiological | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 37708 | 0.001 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by TN or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Bean Station Utility District (TN0000041) on EPA.gov.
Frequently Asked Questions
Is Bean Station Utility District water safe to drink?
Bean Station Utility District has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Bean Station Utility District serve?
Bean Station Utility District serves approximately 10,378 people across 5 ZIP codes in Tennessee.
Where does Bean Station Utility District get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: Detected
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Bean Station Utility District (EPA ID: TN0000041) — request the latest Consumer Confidence Report or ask about specific contaminants.