Arthur-shawanee Utility District
EPA ID: TN0000022 · 10,037 people served · 6 ZIP codes
Where compliant utilities carry no open actions, Arthur-shawanee Utility District shows 1 active EPA violation in the federal database for a service population of approximately 10,037.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for Arthur-shawanee Utility District Source: EPA SDWIS service area boundaries.
Service area boundary — Grade C
Service Area Demographics
The Arthur-shawanee Utility District serves a community with a median household income of $50,356 and an estimated 21,026 residents across its service area. Approximately 50% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 78% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
🌊 Where Does Your Water Come From?
Arthur-shawanee Utility District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 2% of homes in Claiborne County, Tennessee rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How Arthur-shawanee Utility District compares to EPA limits
What This Means For You
Haloacetic Acids (HAA5) at 1 mg/L exceeds the EPA maximum of 0.06 mg/L. Cancer risk; reproductive & developmental effects. Consider granular activated carbon (GAC) filtration.
Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Haloacetic Acids (HAA5) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Tennessee
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Arthur-shawanee Utility District (EPA ID: TN0000022) is a community water system in Tennessee that serves approximately 10,037 people from surface water sources.
This system provides water to 6 ZIP codes across 5 communities.
Average Home Safety Score: C (59/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| February 3, 2024 | Lead and Copper Rule | Monitoring | Resolved |
| July 1, 2023 | Surface Water Treatment Rule | Monitoring | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Haloacetic Acids (HAA5) | Disinfection Byproducts | 1 | No |
| Surface Water Treatment Rule | Treatment Failure | 1 | No |
| Lead and Copper Rule | Treatment Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: 3 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 3 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.
- 37724 — Cumberland Gap
- 37752 — Harrogate
- 37824 — New Tazewell
- 37825 — New Tazewell
- 37867 — Shawanee
- 37870 — Speedwell
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Arthur-shawanee Utility District (TN0000022) on EPA.gov.
Frequently Asked Questions
Is Arthur-shawanee Utility District water safe to drink?
Arthur-shawanee Utility District has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Arthur-shawanee Utility District serve?
Arthur-shawanee Utility District serves approximately 10,037 people across 6 ZIP codes in Tennessee.
Where does Arthur-shawanee Utility District get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Arthur-shawanee Utility District (EPA ID: TN0000022) — request the latest Consumer Confidence Report or ask about specific contaminants.