Monitoring Violations OH

Lebanon City

EPA ID: OH8304112 · 20,700 people served · 4 ZIP codes

Within the five-year EPA monitoring span, Lebanon City accumulated 3 violations — every finding has been resolved and the utility operates in full compliance today, supplying water to approximately 20,700 people without any active enforcement proceedings.

Data: EPA SDWIS Last verified: 2026-04-02

C · 64
Avg Safety Score
20,700
People Served
4
ZIP Codes Served
3
Violations (5yr)
Surface Water
Water Source
0.0014 mg/L
Max Lead Level
Zone 1
Radon Risk · High
1
Contaminants Flagged
$305K
Median Home Value in Service Area

Service Area Map

Coverage area for Lebanon City Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$97,439
Median Household Income
84,655
Service Area Population
3%
Disadvantaged Population
20th
Poverty Percentile
30th
Energy Burden Percentile
52%
Pre-1986 Housing

The Lebanon City serves a community with a median household income of $97,439 and an estimated 84,655 residents across its service area. Approximately 52% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

Lebanon City's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
70th
Superfund Site Proximity

About 1% of homes in Warren County, Ohio rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

39 yr
Avg Pipe Age
Copper
Pipe Material
31 yr
Est. Remaining Life
Stable
Decay Status
Installed 56% of expected lifespan used End of life

Detected Contaminants

How Lebanon City compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 3 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 6 detections recorded. 4 exceed federal EPA limits (4 ppt for PFOA/PFOS). 3 exceed state limits.

State limits: PFOA: 0.012 ppt, PFOS: 0.012 ppt, PFBS: 2.1 ppt, PFHxS: 0.14 ppt, HFPO-DA: 0.7 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Ohio

Ashland City
20,648 people
D 0 violations
C 5 violations
C 0 violations
C 0 violations
C 5 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance PFAS Treatment
Radon Mitigation $1,200
Flood Insurance $900
PFAS Treatment $600
Total Estimated Cost $2,700

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,700 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Lebanon City (EPA ID: OH8304112) is a community water system in Ohio that serves approximately 20,700 people from surface water sources.

This system provides water to 4 ZIP codes across 4 communities.

Average Home Safety Score: C (64/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

3 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
September 5, 2024 Surface Water Treatment Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 3 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
45036 0.0014 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by OH or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Lebanon City (OH8304112) on EPA.gov.

Frequently Asked Questions

Is Lebanon City water safe to drink?

Lebanon City has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Lebanon City serve?

Lebanon City serves approximately 20,700 people across 4 ZIP codes in Ohio.

Where does Lebanon City get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
513-228-3701
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from City of Lebanon Drinking Water Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Purchased from another utility
Treated water purchased wholesale from another water system.
Disinfectant used
Ultraviolet (UV)
Treatment chemicals reported
chlorinefluoridelime

Source: City of Lebanon Drinking Water Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from City of Lebanon Drinking Water Consumer Confidence Report:
GCWW’s Bolton Treatment Plant treats groundwater from the Great Miami Aquifer, classified as having a high susceptibility to contamination due to lack of protective clay layer, shallow depth, nearby potential sources, and low nitrate levels. GCWW has implemented a source-water-protection program to address vulnerability.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Advanced
Advanced treatment that may include ozonation, ultraviolet disinfection, activated-carbon filtration, or membrane filtration. Used when source water has elevated contamination risk or to remove disinfection byproducts.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine
pH adjustment
Raises or lowers water acidity to protect pipes and improve treatment performance.
lime
Fluoridation
Added at low levels per state or local public-health policy for dental health.
fluoride

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

Livestock operationsUrban stormwater runoffIndustrial/domestic wastewater dischargesOil and gas productionMiningFarmingSewageSeptic systemsGas stationsPetroleum productionNatural deposits

Treatment classification and chemical list sourced from City of Lebanon Drinking Water Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
116
Detections
2
Latest sample
2/19/2025
Highest analyte
PFPeA: 4.5 ppt
Analyte Max detected Current MCL Status
PFPeA 4.5 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

PFAS Substances Detected in This System

This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.

Substance Detected level EPA limit Status
PFHxS
Perfluorohexanesulfonic acid
EPA-regulated (2024 NPDWR)
1.53 ppt 10 ppt Below EPA limit

In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →

Source: Consumer Confidence Report disclosed by City of Lebanon Drinking Water.

ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.

Learn more about PFAS health effects and filtration →

Lead Service Line Replacement Tracker

This water utility's lead service line (LSL) replacement program is tracked from public Consumer Confidence Report filings. Email signup notifies subscribers when the utility files an updated replacement plan or progress milestone.

Get notified on replacement progress

Subscribers receive an email when this utility updates its LSL plan, files a milestone report, or adjusts replacement timelines. No marketing, no third-party sharing.

By submitting you agree to Privacy Policy. Unsubscribe anytime via the link in any email.

City of Lebanon Drinking Water

ZipCheckup is not affiliated with this water utility. LSL replacement-program data is sourced from public CCR filings published by the utility. Subscription notifications are based on automated parsing of subsequent CCR releases.

Learn more about Lead and Copper Rule replacement requirements →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
3
Unknown Material
7,335
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 20,700
Reported to Ohio

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Lebanon City safe to drink?
Lebanon City has a C safety grade based on 3 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Lebanon City's water?
Detected contaminants include Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Lebanon City serve?
Lebanon City serves approximately 20,700 people with drinking water across 4 ZIP codes.
What is Lebanon City's water source?
Lebanon City draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Lebanon City's water?
The maximum detected lead level is 0.0014 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Lebanon City's service area?
The Lebanon City service area has a median household income of $97,439. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Lebanon City get its water?
Lebanon City's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Lebanon City (EPA ID: OH8304112) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Ohio Lebanon City

Get safety alerts for Lebanon City, Ohio

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.