Monitoring Violations OH

Bellevue City

EPA ID: OH3900011 · 8,236 people served · 2 ZIP codes

In the most recent EPA reporting cycle, Bellevue City carried 1 violation still marked as unresolved — each remains active in the federal enforcement ledger while the utility continues operations for its service population of approximately 8,236 people across the area it supplies.

Data: EPA SDWIS Last verified: 2026-04-02

D · 45
Avg Safety Score
8,236
People Served
2
ZIP Codes Served
3
Violations (5yr)
Surface Water
Water Source
0.01 mg/L
Max Lead Level
Zone 1
Radon Risk · High
2
Contaminants Flagged

Service Area Map

Coverage area for Bellevue City Source: EPA SDWIS service area boundaries.

Service area boundary — Grade D

Service Area Demographics

$45,286
Median Household Income
12,640
Service Area Population
30%
Disadvantaged Population
55th
Poverty Percentile
80th
Energy Burden Percentile
89%
Pre-1986 Housing

The Bellevue City serves a community with a median household income of $45,286 and an estimated 12,640 residents across its service area. Approximately 89% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

Bellevue City's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
55th
Wastewater Discharge Proximity
10th
Superfund Site Proximity

About 0% of homes in Huron County, Ohio rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

91 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
3 yr
Est. Remaining Life
Stable
Decay Status
Installed 97% of expected lifespan used End of life

Detected Contaminants

How Bellevue City compares to EPA limits

What This Means For You

Fecal Coliform at 2 presence exceeds the EPA maximum of presence.

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 2 detections recorded.

State limits: PFOA: 0.012 ppt, PFOS: 0.012 ppt, PFBS: 2.1 ppt, PFHxS: 0.14 ppt, HFPO-DA: 0.7 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Ohio

C 12 violations
B 1 violation
C 1 violation
Kenton City
8,360 people
C 3 violations
C 4 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance PFAS Treatment
Radon Mitigation $1,200
Flood Insurance $600
PFAS Treatment $500
Total Estimated Cost $2,300

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,300 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Bellevue City (EPA ID: OH3900011) is a community water system in Ohio that serves approximately 8,236 people from surface water sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: D (45/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

3 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
March 1, 2024 Fecal Coliform Monitoring Resolved
February 1, 2024 Fecal Coliform Monitoring Resolved
October 5, 2023 Surface Water Treatment Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Fecal Coliform Microbiological 2 No
Surface Water Treatment Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
44811 0.01 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 1 ZIP code confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Bellevue City (OH3900011) on EPA.gov.

Frequently Asked Questions

Is Bellevue City water safe to drink?

Bellevue City has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Bellevue City serve?

Bellevue City serves approximately 8,236 people across 2 ZIP codes in Ohio.

Where does Bellevue City get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
116
Detections
1
Latest sample
9/25/2024
Highest analyte
PFBA: 7.6 ppt
Analyte Max detected Current MCL Status
PFBA 7.6 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
2,354
Unknown Material
869
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 8,236
Reported to Ohio

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Bellevue City safe to drink?
Bellevue City has a D safety grade based on 3 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Bellevue City's water?
Detected contaminants include Fecal Coliform, Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Bellevue City serve?
Bellevue City serves approximately 8,236 people with drinking water across 2 ZIP codes.
What is Bellevue City's water source?
Bellevue City draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Bellevue City's water?
The maximum detected lead level is 0.01 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Bellevue City's service area?
The Bellevue City service area has a median household income of $45,286. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Bellevue City get its water?
Bellevue City's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Bellevue City (EPA ID: OH3900011) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Ohio Bellevue City

Get safety alerts for Bellevue City, Ohio

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.