Health Violations Found OH 1 HEALTH VIOLATION

Kenton City

EPA ID: OH3300612 · 8,360 people served · 1 ZIP code

Not yet resolved: 2 EPA violations at Kenton City, affecting about 8,360 residents.

Data: EPA SDWIS Last verified: 2026-04-02

C · 64
Avg Safety Score
8,360
People Served
1
ZIP Code Served
3
Violations (5yr)
Groundwater
Water Source
0.0007 mg/L
Max Lead Level
Zone 1
Radon Risk · High
2
Contaminants Flagged
$136K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 1 (2023) to 1 (2024). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Kenton City Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$54,325
Median Household Income
12,594
Service Area Population
29%
Disadvantaged Population
50th
Poverty Percentile
80th
Energy Burden Percentile
73%
Pre-1986 Housing

The Kenton City serves a community with a median household income of $54,325 and an estimated 12,594 residents across its service area. Approximately 73% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Kenton City's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
20th
Wastewater Discharge Proximity
20th
Superfund Site Proximity

About 5% of homes in Hardin County, Ohio rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

61 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
4 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 94% of expected lifespan used End of life

Detected Contaminants

How Kenton City compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Contaminant 0700 at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Ohio

B 1 violation
C 4 violations
C 12 violations
D 0 violations
Bellevue City
8,236 people
D 3 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance Water Filtration
Radon Mitigation $1,200
Flood Insurance $1,200
Water Filtration $300
Total Estimated Cost $2,700

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $2,700 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Kenton City (EPA ID: OH3300612) is a community water system in Ohio that serves approximately 8,360 people from groundwater sources.

This system serves ZIP code 43326 in Kenton.

Average Home Safety Score: C (64/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 health-based violation recorded in the past 5 years. 2 remain unresolved.

Recent Violations

Date Contaminant Type Status
December 30, 2024 Surface Water Treatment Rule Monitoring Unresolved
October 1, 2023 Contaminant 0700 Health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 2 No
Contaminant 0700 Other Violation 1 Yes

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
43326 0.0007 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by OH or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Kenton City (OH3300612) on EPA.gov.

Frequently Asked Questions

Is Kenton City water safe to drink?

Kenton City has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Kenton City serve?

Kenton City serves approximately 8,360 people across 1 ZIP code in Ohio.

Where does Kenton City get its water?

The primary water source is groundwater.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
58

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

1
Confirmed Lead
25
Galvanized — Replacement Required
2,927
Unknown Material
221
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 8,360
Reported to Ohio

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Kenton City safe to drink?
Kenton City has a C safety grade based on 3 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Kenton City's water?
Detected contaminants include Surface Water Treatment Rule, Contaminant 0700. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Kenton City serve?
Kenton City serves approximately 8,360 people with drinking water across 1 ZIP code.
What is Kenton City's water source?
Kenton City draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Kenton City's water?
The maximum detected lead level is 0.0007 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Kenton City's service area?
The Kenton City service area has a median household income of $54,325. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Kenton City get its water?
Kenton City's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Kenton City (EPA ID: OH3300612) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Ohio Kenton City

Get safety alerts for Kenton City, Ohio

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.