Water System Report OH

Oxford City Public Water System

EPA ID: OH0902312 · 24,000 people served · 4 ZIP codes

Zero EPA violations over five years — Oxford City Public Water System has kept tap water compliance clean for its full service population of 24,000.

Data: EPA SDWIS Last verified: 2026-04-02

D · 40
Avg Safety Score
24,000
People Served
4
ZIP Codes Served
0
Violations (5yr)
Groundwater
Water Source
Zone 1
Radon Risk · High
0
Contaminants Flagged
$217K
Median Home Value in Service Area

Service Area Map

Coverage area for Oxford City Public Water System Source: EPA SDWIS service area boundaries.

Service area boundary — Grade D

Service Area Demographics

$72,932
Median Household Income
84,412
Service Area Population
34%
Disadvantaged Population
40th
Poverty Percentile
50th
Energy Burden Percentile
64%
Pre-1986 Housing

The Oxford City Public Water System serves a community with a median household income of $72,932 and an estimated 84,412 residents across its service area. Approximately 64% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 34% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Oxford City Public Water System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
60th
Wastewater Discharge Proximity
80th
Superfund Site Proximity

About 1% of homes in Butler County, Ohio rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Wastewater Proximity Note: This service area ranks in the 60th percentile nationally for proximity to wastewater discharge points.

Superfund Proximity Note: This service area ranks in the 80th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.

Infrastructure Risk

51 yr
Avg Pipe Age
Copper
Pipe Material
17 yr
Est. Remaining Life
Stable
Decay Status
Installed 75% of expected lifespan used End of life

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 7 detections recorded. 2 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.012 ppt, PFOS: 0.012 ppt, PFBS: 2.1 ppt, PFHxS: 0.14 ppt, HFPO-DA: 0.7 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Ohio

B 0 violations
C 0 violations
C 0 violations
Nawa
24,766 people
C 3 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance PFAS Treatment
Radon Mitigation $1,200
Flood Insurance $900
PFAS Treatment $400
Total Estimated Cost $2,500

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$165
10 years
$330
20 years
$660

Compare: Estimated remediation cost is $2,500 (one-time) vs. $330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

OXFORD CITY PWS (EPA ID: OH0902312) is a community water system in Ohio that serves approximately 24,000 people from groundwater sources.

This system provides water to 4 ZIP codes across 4 communities.

Average Home Safety Score: D (40/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

No Lead and Copper Rule sampling data available for this water system.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 2 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Oxford City Public Water System (OH0902312) on EPA.gov.

Frequently Asked Questions

Is Oxford City Public Water System water safe to drink?

Based on EPA records, Oxford City Public Water System has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does Oxford City Public Water System serve?

Oxford City Public Water System serves approximately 24,000 people across 4 ZIP codes in Ohio.

Where does Oxford City Public Water System get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
1-513-523-1753
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
15 S. College Ave. Oxford, Ohio 45056

Contact information from City of Oxford Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine

Source: City of Oxford Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from City of Oxford Consumer Confidence Report:
All of Oxford’s water sources have been determined to have a high susceptibility to contamination, largely due to the shallow depth of the aquifer and the lack of a protective layer of clay overlying it.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment classification and chemical list sourced from City of Oxford Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
58
Detections
2
Latest sample
12/5/2024
Highest analyte
PFBS: 12.6 ppt
Analyte Max detected Current MCL Status
PFBS 12.6 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

PFAS Substances Detected in This System

This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.

Substance Detected level EPA limit Status
Perfluorobutanesulfonic Acid
Not yet EPA-regulated
5.39 ppt No federal limit set

In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →

Source: Consumer Confidence Report disclosed by City of Oxford.

ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.

Learn more about PFAS health effects and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

4
Confirmed Lead
66
Galvanized — Replacement Required
2
Unknown Material
4,776
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 24,000
Reported to Ohio

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Oxford City Public Water System safe to drink?
Oxford City Public Water System has a D safety grade based on 0 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
Should I use a water filter?
Oxford City Public Water System meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does Oxford City Public Water System serve?
Oxford City Public Water System serves approximately 24,000 people with drinking water across 4 ZIP codes.
What is Oxford City Public Water System's water source?
Oxford City Public Water System draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of Oxford City Public Water System's service area?
The Oxford City Public Water System service area has a median household income of $72,932. EPA EJScreen data classifies 34% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Oxford City Public Water System get its water?
Oxford City Public Water System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Oxford City Public Water System (EPA ID: OH0902312) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Ohio Oxford City Public Water System

Get safety alerts for Oxford City Public Water System, Ohio

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.