Monitoring Violations OH

Butler Company Water District 2 Public Water System

EPA ID: OH0900303 · 116,572 people served · 13 ZIP codes

In the most recent EPA reporting cycle, Butler Company Water District 2 Public Water System carried 2 violations still marked as unresolved — each remains active in the federal enforcement ledger while the utility continues operations for its service population of approximately 116,572 people across the area it supplies.

Data: EPA SDWIS Last verified: 2026-04-02

C · 62
Avg Safety Score
116,572
People Served
13
ZIP Codes Served
6
Violations (5yr)
Surface Water
Water Source
0.0039 mg/L
Max Lead Level
Zone 1
Radon Risk · High
4
Contaminants Flagged
$251K
Median Home Value in Service Area

Service Area Map

Coverage area for Butler Company Water District 2 Public Water System Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$81,646
Median Household Income
402,774
Service Area Population
29%
Disadvantaged Population
38th
Poverty Percentile
45th
Energy Burden Percentile
59%
Pre-1986 Housing

The Butler Company Water District 2 Public Water System serves a community with a median household income of $81,646 and an estimated 402,774 residents across its service area. Approximately 59% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

Butler Company Water District 2 Public Water System's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
55th
Wastewater Discharge Proximity
75th
Superfund Site Proximity

About 1% of homes in Butler County, Ohio rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 75th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

46 yr
Avg Pipe Age
Copper
Pipe Material
21 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 69% of expected lifespan used End of life

Detected Contaminants

How Butler Company Water District 2 Public Water System compares to EPA limits

Total Trihalomethanes (TTHM) 2 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns

What This Means For You

Total Trihalomethanes (TTHM) at 2 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 38 detections recorded. 10 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.012 ppt, PFOS: 0.012 ppt, PFBS: 2.1 ppt, PFHxS: 0.14 ppt, HFPO-DA: 0.7 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Ohio

D 13 violations
B 4 violations
C 2 violations
C 4 violations
F 5 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance PFAS Treatment
Radon Mitigation $1,077
Flood Insurance $1,062
PFAS Treatment $408
Total Estimated Cost $2,546

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$5,165
10 years
$10,330
20 years
$20,660

Compare: Estimated remediation cost is $2,546 (one-time) vs. $10,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Butler Company Water District 2 Public Water System (EPA ID: OH0900303) is a community water system in Ohio that serves approximately 116,572 people from surface water sources.

This system provides water to 13 ZIP codes across 7 communities.

Average Home Safety Score: C (62/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

6 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
December 30, 2024 Surface Water Treatment Rule Monitoring Unresolved
August 14, 2024 Lead and Copper Rule Monitoring Resolved
November 1, 2023 Consumer Confidence Report Rule Monitoring Resolved
October 20, 2023 Surface Water Treatment Rule Monitoring Resolved
April 1, 2023 Total Trihalomethanes (TTHM) Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Total Trihalomethanes (TTHM) Disinfection Byproducts 2 No
Surface Water Treatment Rule Treatment Failure 2 No
Lead and Copper Rule Treatment Failure 1 No
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
45011 0.0039 mg/L No N/A
45012 0.0039 mg/L No N/A
45015 0.0039 mg/L No N/A
45025 0.0039 mg/L No N/A
45026 0.0039 mg/L No N/A
45044 0.0007 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 9 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 4 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Butler Company Water District 2 Public Water System (OH0900303) on EPA.gov.

Frequently Asked Questions

Is Butler Company Water District 2 Public Water System water safe to drink?

Butler Company Water District 2 Public Water System has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Butler Company Water District 2 Public Water System serve?

Butler Company Water District 2 Public Water System serves approximately 116,572 people across 13 ZIP codes in Ohio.

Where does Butler Company Water District 2 Public Water System get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
174
Detections
3
Latest sample
9/12/2023
Highest analyte
PFHxS: 4.7 ppt
Analyte Max detected Current MCL Status
PFHxS 4.7 ppt 10 ppt Below current MCL
PFBS 3.5 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
42,124
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 116,572
Reported to Ohio

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Butler Company Water District 2 Public Water System safe to drink?
Butler Company Water District 2 Public Water System has a C safety grade based on 6 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Butler Company Water District 2 Public Water System's water?
Detected contaminants include Total Trihalomethanes (TTHM), Surface Water Treatment Rule, Lead and Copper Rule, Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 4 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Butler Company Water District 2 Public Water System serve?
Butler Company Water District 2 Public Water System serves approximately 116,572 people with drinking water across 13 ZIP codes.
What is Butler Company Water District 2 Public Water System's water source?
Butler Company Water District 2 Public Water System draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Butler Company Water District 2 Public Water System's water?
The maximum detected lead level is 0.0039 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Butler Company Water District 2 Public Water System's service area?
The Butler Company Water District 2 Public Water System service area has a median household income of $81,646. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Butler Company Water District 2 Public Water System get its water?
Butler Company Water District 2 Public Water System's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Butler Company Water District 2 Public Water System (EPA ID: OH0900303) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Ohio Butler Company Water District 2 Public Water System

Get safety alerts for Butler Company Water District 2 Public Water System, Ohio

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.