Monitoring Violations MT

City of Hamilton

EPA ID: MT0000234 · 5,585 people served · 2 ZIP codes

Since the flagged events, City of Hamilton resolved all 1 violation — compliant today, 5,585 residents served.

Data: EPA SDWIS Last verified: 2026-04-02

C · 55
Avg Safety Score
5,585
People Served
2
ZIP Codes Served
1
Violations (5yr)
Groundwater
Water Source
0.001 mg/L
Max Lead Level
Zone 1
Radon Risk · High
1
Contaminants Flagged

Service Area Map

Coverage area for City of Hamilton Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$64,493
Median Household Income
14,775
Service Area Population
60%
Disadvantaged Population
60th
Poverty Percentile
80th
Energy Burden Percentile
56%
Pre-1986 Housing

The City of Hamilton serves a community with a median household income of $64,493 and an estimated 14,775 residents across its service area. Approximately 56% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 60% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

City of Hamilton's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
30th
Wastewater Discharge Proximity
20th
Superfund Site Proximity

About 2% of homes in Ravalli County, Montana rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

56 yr
Avg Pipe Age
Copper
Pipe Material
14 yr
Est. Remaining Life
Stable
Decay Status
Installed 80% of expected lifespan used End of life

Detected Contaminants

How City of Hamilton compares to EPA limits

What This Means For You

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 1 detection recorded.

Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Montana

City of Polson
5,300 people
C 2 violations
B 1 violation
City of Lewistown
5,923 people
D 27 violations
C 1 violation
City of Sidney
5,000 people
D 18 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance PFAS Treatment
Radon Mitigation $1,200
Flood Insurance $600
PFAS Treatment $250
Total Estimated Cost $2,050

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,050 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

HAMILTON CITY OF (EPA ID: MT0000234) is a community water system in Montana that serves approximately 5,585 people from groundwater sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: C (55/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 monitoring/reporting violation recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
December 30, 2024 Stage 1 DBP Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
59840 0.001 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 1 ZIP code confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Hamilton (MT0000234) on EPA.gov.

Frequently Asked Questions

Is City of Hamilton water safe to drink?

City of Hamilton has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does City of Hamilton serve?

City of Hamilton serves approximately 5,585 people across 2 ZIP codes in Montana.

Where does City of Hamilton get its water?

The primary water source is groundwater.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine

Source: Hamilton City of Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment classification and chemical list sourced from Hamilton City of Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
232
Detections
1
Latest sample
8/15/2023
Highest analyte
PFBS: 3.1 ppt
Analyte Max detected Current MCL Status
PFBS 3.1 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

2
Confirmed Lead
67
Galvanized — Replacement Required
2,444
Unknown Material
19
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 5,585
Reported to Montana

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from City of Hamilton safe to drink?
City of Hamilton has a C safety grade based on 1 recorded violation. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in City of Hamilton's water?
Detected contaminants include Stage 1 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Hamilton serve?
City of Hamilton serves approximately 5,585 people with drinking water across 2 ZIP codes.
What is City of Hamilton's water source?
City of Hamilton draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Hamilton's water?
The maximum detected lead level is 0.001 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Hamilton's service area?
The City of Hamilton service area has a median household income of $64,493. EPA EJScreen data classifies 60% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does City of Hamilton get its water?
City of Hamilton's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

City of Hamilton (EPA ID: MT0000234) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Montana City of Hamilton

Get safety alerts for City of Hamilton, Montana

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.