Water System Report MN

Breckenridge

EPA ID: MN1840002 · 3,340 people served · 1 ZIP code

Water monitoring history at Breckenridge shows a clean slate — EPA tracking over the past five years turned up no violations, and 3,340 residents continue to receive fully compliant service.

Data: EPA SDWIS Last verified: 2026-04-02

C · 55
Avg Safety Score
3,340
People Served
1
ZIP Code Served
0
Violations (5yr)
Groundwater
Water Source
0.003 mg/L
Max Lead Level
Zone 1
Radon Risk · High
0
Contaminants Flagged
$153K
Median Home Value in Service Area

Service Area Map

Coverage area for Breckenridge Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$61,537
Median Household Income
3,886
Service Area Population
0%
Disadvantaged Population
50th
Poverty Percentile
50th
Energy Burden Percentile
72%
Pre-1986 Housing

The Breckenridge serves a community with a median household income of $61,537 and an estimated 3,886 residents across its service area. Approximately 72% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Breckenridge's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Low Risk
Source Contamination Risk
80th
Wastewater Discharge Proximity
10th
Superfund Site Proximity

About 2% of homes in Wilkin County, Minnesota rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Wastewater Proximity Note: This service area ranks in the 80th percentile nationally for proximity to wastewater discharge points.

Infrastructure Risk

47 yr
Avg Pipe Age
Copper
Pipe Material
23 yr
Est. Remaining Life
Stable
Decay Status
Installed 67% of expected lifespan used End of life

Comparable Water Systems

Similar-sized systems in Minnesota

Plainview
3,340 people
C 0 violations
Rush City
3,339 people
C 5 violations
Pine Island
3,324 people
C 2 violations
Jackson
3,323 people
D 0 violations
Montgomery
3,379 people
C 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance
Radon Mitigation $1,200
Flood Insurance $1,200
Total Estimated Cost $2,400

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

System Overview

Breckenridge (EPA ID: MN1840002) is a community water system in Minnesota that serves approximately 3,340 people from groundwater sources.

This system serves ZIP code 56520 in Breckenridge.

Average Home Safety Score: C (55/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
56520 0.003 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MN or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Breckenridge (MN1840002) on EPA.gov.

Frequently Asked Questions

Is Breckenridge water safe to drink?

Based on EPA records, Breckenridge has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does Breckenridge serve?

Breckenridge serves approximately 3,340 people across 1 ZIP code in Minnesota.

Where does Breckenridge get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(218) 643-4681
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from Breckenridge Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Minimal — disinfection only
Disinfection (typically chlorine) without additional filtration or coagulation stages. Common for groundwater systems where source water meets federal standards after disinfection alone.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Fluoridation
Added at low levels per state or local public-health policy for dental health.
fluoride

Treatment classification and chemical list sourced from Breckenridge Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
58

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

43
Confirmed Lead
56
Galvanized — Replacement Required
0
Unknown Material
1,333
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 3,340
Reported to Minnesota

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Breckenridge safe to drink?
Breckenridge has a C safety grade based on 0 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
Should I use a water filter?
Breckenridge meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does Breckenridge serve?
Breckenridge serves approximately 3,340 people with drinking water across 1 ZIP code.
What is Breckenridge's water source?
Breckenridge draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Breckenridge's water?
The maximum detected lead level is 0.003 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Breckenridge's service area?
The Breckenridge service area has a median household income of $61,537. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Breckenridge get its water?
Breckenridge's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Breckenridge (EPA ID: MN1840002) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Minnesota Breckenridge

Get safety alerts for Breckenridge, Minnesota

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.