Morris
EPA ID: MN1750005 · 5,351 people served · 2 ZIP codes
Tallying the federal enforcement file for Morris yields 13 open violations that have not been formally closed — each finding sits in the EPA database while the utility continues to deliver water to approximately 5,351 residents and works through the required corrective action process.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Worsening · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 2 (2023) to 4 (2025). The pattern suggests growing compliance challenges.
Service Area Map
Coverage area for Morris Source: EPA SDWIS service area boundaries.
Service area boundary — Grade C
Service Area Demographics
The Morris serves a community with a median household income of $75,261 and an estimated 7,252 residents across its service area. Approximately 74% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
Morris's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 1% of homes in Stevens County, Minnesota rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How Morris compares to EPA limits
What This Means For You
Barium at 9 mg/L exceeds the EPA maximum of 2 mg/L.
Lead and Copper Rule at 4 mg/L exceeds the EPA maximum of mg/L.
Stage 1 DBP Rule at 3 mg/L exceeds the EPA maximum of mg/L.
Consumer Confidence Report Rule at 3 mg/L exceeds the EPA maximum of mg/L.
Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Comparable Water Systems
Similar-sized systems in Minnesota
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Morris (EPA ID: MN1750005) is a community water system in Minnesota that serves approximately 5,351 people from groundwater sources.
This system provides water to 2 ZIP codes across 2 communities.
Average Home Safety Score: C (55/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| November 9, 2025 | Lead and Copper Rule | Monitoring | Unresolved |
| July 2, 2025 | Stage 2 DBP Rule | Monitoring | Resolved |
| July 1, 2025 | Stage 1 DBP Rule | Monitoring | Unresolved |
| July 1, 2025 | Barium | Health-based | Unresolved |
| May 7, 2025 | Lead and Copper Rule | Monitoring | Resolved |
| April 1, 2025 | Barium | Health-based | Unresolved |
| January 1, 2025 | Barium | Health-based | Unresolved |
| January 1, 2025 | Consumer Confidence Report Rule | Monitoring | Resolved |
| October 23, 2024 | Lead and Copper Rule | Monitoring | Resolved |
| October 1, 2024 | Barium | Health-based | Unresolved |
| October 1, 2024 | Consumer Confidence Report Rule | Monitoring | Resolved |
| July 1, 2024 | Barium | Health-based | Unresolved |
| July 1, 2024 | Stage 1 DBP Rule | Monitoring | Unresolved |
| May 29, 2024 | Lead and Copper Rule | Monitoring | Resolved |
| April 1, 2024 | Barium | Health-based | Unresolved |
| April 1, 2024 | Consumer Confidence Report Rule | Monitoring | Resolved |
| January 1, 2024 | Barium | Health-based | Unresolved |
| January 1, 2024 | Stage 1 DBP Rule | Monitoring | Unresolved |
| October 1, 2023 | Barium | Health-based | Unresolved |
| July 1, 2023 | Barium | Health-based | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Barium | Inorganic | 9 | Yes |
| Lead and Copper Rule | Treatment Failure | 4 | No |
| Stage 1 DBP Rule | Treatment Failure | 3 | No |
| Consumer Confidence Report Rule | Reporting Failure | 3 | No |
| Stage 2 DBP Rule | Treatment Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MN or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Morris (MN1750005) on EPA.gov.
Frequently Asked Questions
Is Morris water safe to drink?
Morris has recorded 9 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.
How many people does Morris serve?
Morris serves approximately 5,351 people across 2 ZIP codes in Minnesota.
Where does Morris get its water?
The primary water source is groundwater.
Contact Your Water Utility
Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.
Contact information from Morris Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Treatment regime
How this utility classifies its treatment process and what each reported treatment chemical does.
Treatment chemicals and what each one does
Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.
Treatment classification and chemical list sourced from Morris Consumer Confidence Report.
Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
PFAS Substances Detected in This System
This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.
In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →
Source: Consumer Confidence Report disclosed by Morris.
ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Morris (EPA ID: MN1750005) — request the latest Consumer Confidence Report or ask about specific contaminants.