Monitoring Violations MN

Becker

EPA ID: MN1710008 · 5,034 people served · 4 ZIP codes

Looking at the EPA enforcement file for Becker, 1 violation are listed as unresolved — those findings cover the utility's service area of approximately 5,034 people and remain open in the federal compliance system, awaiting formal corrective action documentation.

Data: EPA SDWIS Last verified: 2026-04-02

D · 54
Avg Safety Score
5,034
People Served
4
ZIP Codes Served
1
Violations (5yr)
Groundwater
Water Source
0.002 mg/L
Max Lead Level
Zone 1
Radon Risk · High
1
Contaminants Flagged
$336K
Median Home Value in Service Area

Service Area Map

Coverage area for Becker Source: EPA SDWIS service area boundaries.

Service area boundary — Grade D

Service Area Demographics

$111,343
Median Household Income
36,684
Service Area Population
0%
Disadvantaged Population
20th
Poverty Percentile
20th
Energy Burden Percentile
32%
Pre-1986 Housing

The Becker serves a community with a median household income of $111,343 and an estimated 36,684 residents across its service area.

💧 Where Does Your Water Come From?

Groundwater

Becker's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
50th
Wastewater Discharge Proximity
40th
Superfund Site Proximity

About 2% of homes in Sherburne County, Minnesota rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

37 yr
Avg Pipe Age
Copper
Pipe Material
33 yr
Est. Remaining Life
Stable
Decay Status
Installed 53% of expected lifespan used End of life

Detected Contaminants

How Becker compares to EPA limits

Gross Beta 1 pCi/L (2% of limit)
0 EPA Limit: 50 pCi/L

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 8 detections recorded. 2 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.035 ppt, PFOS: 0.015 ppt, PFBS: 2 ppt, PFHxS: 0.047 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Minnesota

Lake City
5,042 people
D 0 violations
Circle Pines
5,075 people
B 0 violations
Luverne
4,946 people
C 0 violations
Chisholm
4,940 people
C 0 violations
Lindstrom
4,938 people
B 5 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance PFAS Treatment
Radon Mitigation $1,200
Flood Insurance $1,050
PFAS Treatment $275
Total Estimated Cost $2,525

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,525 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Becker (EPA ID: MN1710008) is a community water system in Minnesota that serves approximately 5,034 people from groundwater sources.

This system provides water to 4 ZIP codes across 4 communities.

Average Home Safety Score: D (54/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 monitoring/reporting violation recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
October 1, 2024 Gross Beta Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Gross Beta Radionuclides 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
55308 0.002 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 3 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Becker (MN1710008) on EPA.gov.

Frequently Asked Questions

Is Becker water safe to drink?

Becker has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Becker serve?

Becker serves approximately 5,034 people across 4 ZIP codes in Minnesota.

Where does Becker get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Contact information from Becker Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Minimal — disinfection only
Disinfection (typically chlorine) without additional filtration or coagulation stages. Common for groundwater systems where source water meets federal standards after disinfection alone.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine
Fluoridation
Added at low levels per state or local public-health policy for dental health.
fluoride

Treatment classification and chemical list sourced from Becker Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
232
Detections
24
Latest sample
12/16/2024
Highest analyte
PFBA: 20 ppt
Analyte Max detected Current MCL Status
PFBA 20 ppt
PFBS 9.6 ppt
PFPeA 4.9 ppt
PFOS 4.6 ppt 10 ppt Above 2029 federal MCL
PFOA 4.3 ppt 10 ppt Above 2029 federal MCL
PFHxA 3.6 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

PFAS Substances Detected in This System

This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.

Substance Detected level EPA limit Status
Perfluorobutanesulfonate (PFBS)
Not yet EPA-regulated
8.9 ppt No federal limit set
Perfluorobutanoic acid (PFBA)
Not yet EPA-regulated
18 ppt No federal limit set
Perfluoroheptanoic acid (PFHpA)
Not yet EPA-regulated
1.4 ppt No federal limit set
Perfluorohexanesulfonate (PFHxS)
Not yet EPA-regulated
1.7 ppt No federal limit set
Perfluorohexanoic acid (PFHxA)
Not yet EPA-regulated
2.9 ppt No federal limit set
Perfluoropentanoic acid (PFPeA)
Not yet EPA-regulated
3.6 ppt No federal limit set

In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →

Source: Consumer Confidence Report disclosed by Becker.

ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.

Learn more about PFAS health effects and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
1,666
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 5,034
Reported to Minnesota

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Becker safe to drink?
Becker has a D safety grade based on 1 recorded violation. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Becker's water?
Detected contaminants include Gross Beta. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 recorded violation, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Becker serve?
Becker serves approximately 5,034 people with drinking water across 4 ZIP codes.
What is Becker's water source?
Becker draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Becker's water?
The maximum detected lead level is 0.002 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Becker's service area?
The Becker service area has a median household income of $111,343. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Becker get its water?
Becker's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Becker (EPA ID: MN1710008) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Minnesota Becker

Get safety alerts for Becker, Minnesota

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.