Monitoring Violations MN

Starbuck

EPA ID: MN1610008 · 1,440 people served · 4 ZIP codes

Starbuck shows 1 open EPA violation in current federal records for approximately 1,440 people.

Data: EPA SDWIS Last verified: 2026-04-02

C · 66
Avg Safety Score
1,440
People Served
4
ZIP Codes Served
4
Violations (5yr)
Groundwater
Water Source
0.006 mg/L
Max Lead Level
Zone 1
Radon Risk · High
3
Contaminants Flagged
$259K
Median Home Value in Service Area

Service Area Map

Coverage area for Starbuck Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$77,590
Median Household Income
35,661
Service Area Population
0%
Disadvantaged Population
40th
Poverty Percentile
80th
Energy Burden Percentile
59%
Pre-1986 Housing

The Starbuck serves a community with a median household income of $77,590 and an estimated 35,661 residents across its service area. Approximately 59% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Starbuck's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
0th
Wastewater Discharge Proximity
10th
Superfund Site Proximity

About 1% of homes in Pope County, Minnesota rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

53 yr
Avg Pipe Age
Copper
Pipe Material
16 yr
Est. Remaining Life
Stable
Decay Status
Installed 77% of expected lifespan used End of life

Detected Contaminants

How Starbuck compares to EPA limits

Lead 1 mg/L (action level) (EXCEEDS LIMIT)
0 EPA Limit: 0.015 mg/L (action level)
Brain damage in children, kidney & blood pressure in adults

What This Means For You

Lead at 1 mg/L (action level) exceeds the EPA maximum of 0.015 mg/L (action level). Brain damage in children, kidney & blood pressure in adults. Consider reverse osmosis filtration.

Consumer Confidence Report Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 3 detections recorded. 1 exceeds federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.035 ppt, PFOS: 0.015 ppt, PFBS: 2 ppt, PFHxS: 0.047 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Lead was detected in this water system. reverse osmosis filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Minnesota

Tonka Bay
1,442 people
0 violations
Sandstone
1,425 people
0 violations
Wheaton
1,465 people
D 1 violation
Frazee
1,400 people
D 0 violations
Richmond
1,485 people
D 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment
Flood Insurance $1,050
Radon Mitigation $1,000
PFAS Treatment $150
Total Estimated Cost $2,200

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,200 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Starbuck (EPA ID: MN1610008) is a community water system in Minnesota that serves approximately 1,440 people from groundwater sources.

This system provides water to 4 ZIP codes across 4 communities.

Average Home Safety Score: C (66/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

4 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
January 1, 2025 Consumer Confidence Report Rule Monitoring Resolved
January 1, 2023 Consumer Confidence Report Rule Monitoring Unresolved
January 1, 2023 Lead Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Consumer Confidence Report Rule Reporting Failure 2 No
Lead Inorganic 1 No
Stage 1 DBP Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
56381 0.006 mg/L No N/A
56349 0.005 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MN or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Starbuck (MN1610008) on EPA.gov.

Frequently Asked Questions

Is Starbuck water safe to drink?

Starbuck has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Starbuck serve?

Starbuck serves approximately 1,440 people across 4 ZIP codes in Minnesota.

Where does Starbuck get its water?

The primary water source is groundwater.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

3
Confirmed Lead
38
Galvanized — Replacement Required
295
Unknown Material
374
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 1,440
Reported to Minnesota

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Starbuck safe to drink?
Starbuck has a C safety grade based on 4 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Starbuck's water?
Detected contaminants include Lead, Consumer Confidence Report Rule, Stage 1 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Starbuck serve?
Starbuck serves approximately 1,440 people with drinking water across 4 ZIP codes.
What is Starbuck's water source?
Starbuck draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Starbuck's water?
The maximum detected lead level is 0.006 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Starbuck's service area?
The Starbuck service area has a median household income of $77,590. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Starbuck get its water?
Starbuck's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Starbuck (EPA ID: MN1610008) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Minnesota Starbuck

Get safety alerts for Starbuck, Minnesota

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.