Monitoring Violations MN

Perham

EPA ID: MN1560023 · 3,421 people served · 4 ZIP codes

Since the flagged events, Perham resolved all 1 violation — compliant today, 3,421 residents served.

Data: EPA SDWIS Last verified: 2026-04-02

C · 61
Avg Safety Score
3,421
People Served
4
ZIP Codes Served
1
Violations (5yr)
Groundwater
Water Source
0.003 mg/L
Max Lead Level
Zone 1
Radon Risk · High
1
Contaminants Flagged
$180K
Median Home Value in Service Area

Service Area Map

Coverage area for Perham Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$62,218
Median Household Income
20,107
Service Area Population
29%
Disadvantaged Population
60th
Poverty Percentile
65th
Energy Burden Percentile
63%
Pre-1986 Housing

The Perham serves a community with a median household income of $62,218 and an estimated 20,107 residents across its service area. Approximately 63% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Perham's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Low Risk
Source Contamination Risk
10th
Wastewater Discharge Proximity
45th
Superfund Site Proximity

About 1% of homes in Wadena County, Minnesota rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

48 yr
Avg Pipe Age
Copper
Pipe Material
22 yr
Est. Remaining Life
Stable
Decay Status
Installed 69% of expected lifespan used End of life

Detected Contaminants

How Perham compares to EPA limits

What This Means For You

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Minnesota

Annandale
3,430 people
C 0 violations
Benson
3,437 people
D 1 violation
Pine City
3,458 people
B 2 violations
Montgomery
3,379 people
C 0 violations
D 1 violation

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance
Radon Mitigation $1,200
Flood Insurance $900
Total Estimated Cost $2,100

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $2,100 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Perham (EPA ID: MN1560023) is a community water system in Minnesota that serves approximately 3,421 people from groundwater sources.

This system provides water to 4 ZIP codes across 4 communities.

Average Home Safety Score: C (61/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 monitoring/reporting violation recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
56573 0.003 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MN or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Perham (MN1560023) on EPA.gov.

Frequently Asked Questions

Is Perham water safe to drink?

Perham has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Perham serve?

Perham serves approximately 3,421 people across 4 ZIP codes in Minnesota.

Where does Perham get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(218) 346-5242
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from Perham Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Minimal — disinfection only
Disinfection (typically chlorine) without additional filtration or coagulation stages. Common for groundwater systems where source water meets federal standards after disinfection alone.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine
Fluoridation
Added at low levels per state or local public-health policy for dental health.
fluoride

Treatment classification and chemical list sourced from Perham Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

PFAS Substances Detected in This System

This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.

Substance Detected level EPA limit Status
Perfluorobutanoic acid
Not yet EPA-regulated
1.2 ppt No federal limit set
Perfluorohexanoic acid
Not yet EPA-regulated
1.1 ppt No federal limit set

In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →

Source: Consumer Confidence Report disclosed by Perham.

ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.

Learn more about PFAS health effects and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

7
Confirmed Lead
69
Galvanized — Replacement Required
386
Unknown Material
1,174
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 3,421
Reported to Minnesota

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Perham safe to drink?
Perham has a C safety grade based on 1 recorded violation. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Perham's water?
Detected contaminants include Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Perham serve?
Perham serves approximately 3,421 people with drinking water across 4 ZIP codes.
What is Perham's water source?
Perham draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Perham's water?
The maximum detected lead level is 0.003 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Perham's service area?
The Perham service area has a median household income of $62,218. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Perham get its water?
Perham's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Perham (EPA ID: MN1560023) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Minnesota Perham

Get safety alerts for Perham, Minnesota

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.