Water System Report MN

International Falls

EPA ID: MN1360002 · 5,637 people served · 2 ZIP codes

Unlike many utilities its size, International Falls carries a violation-free five-year record — no EPA notices, no MCL exceedances, serving 5,637 people.

Data: EPA SDWIS Last verified: 2026-04-02

C · 66
Avg Safety Score
5,637
People Served
2
ZIP Codes Served
0
Violations (5yr)
Surface Water
Water Source
0.002 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
0
Contaminants Flagged

Service Area Map

Coverage area for International Falls Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$70,348
Median Household Income
8,895
Service Area Population
0%
Disadvantaged Population
60th
Poverty Percentile
60th
Energy Burden Percentile
73%
Pre-1986 Housing

The International Falls serves a community with a median household income of $70,348 and an estimated 8,895 residents across its service area. Approximately 73% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

International Falls's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
0th
Superfund Site Proximity

About 2% of homes in Koochiching County, Minnesota rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

48 yr
Avg Pipe Age
Copper
Pipe Material
22 yr
Est. Remaining Life
Stable
Decay Status
Installed 69% of expected lifespan used End of life

Comparable Water Systems

Similar-sized systems in Minnesota

Glencoe
5,607 people
B 0 violations
C 5 violations
Morris
5,351 people
C 19 violations
Montevideo
5,337 people
C 0 violations
Redwood Falls
5,254 people
C 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation
Flood Insurance $900
Radon Mitigation $400
Total Estimated Cost $1,300

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

System Overview

International Falls (EPA ID: MN1360002) is a community water system in Minnesota that serves approximately 5,637 people from surface water sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: C (66/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
56649 0.002 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 1 ZIP code confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

  • 56649 — International Falls
  • 56679 — South International Falls

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for International Falls (MN1360002) on EPA.gov.

Frequently Asked Questions

Is International Falls water safe to drink?

Based on EPA records, International Falls has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does International Falls serve?

International Falls serves approximately 5,637 people across 2 ZIP codes in Minnesota.

Where does International Falls get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
218-283-2990
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from International Falls Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Surface water
Drawn from rivers, lakes, or reservoirs.
Treatment chemicals reported
chlorinefluoride

Source: International Falls Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Minimal — disinfection only
Disinfection (typically chlorine) without additional filtration or coagulation stages. Common for groundwater systems where source water meets federal standards after disinfection alone.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine
Fluoridation
Added at low levels per state or local public-health policy for dental health.
fluoride

Treatment classification and chemical list sourced from International Falls Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

18
Confirmed Lead
1
Galvanized — Replacement Required
840
Unknown Material
2,015
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 5,637
Reported to Minnesota

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from International Falls safe to drink?
International Falls has a C safety grade based on 0 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
Should I use a water filter?
International Falls meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does International Falls serve?
International Falls serves approximately 5,637 people with drinking water across 2 ZIP codes.
What is International Falls's water source?
International Falls draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in International Falls's water?
The maximum detected lead level is 0.002 mg/L. This is within EPA action level guidelines.
What is the demographic profile of International Falls's service area?
The International Falls service area has a median household income of $70,348. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does International Falls get its water?
International Falls's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

International Falls (EPA ID: MN1360002) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Minnesota International Falls

Get safety alerts for International Falls, Minnesota

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.