Monitoring Violations KY

Midway Municipal Water Works

EPA ID: KY1200283 · 2,174 people served · 2 ZIP codes

Even though Midway Municipal Water Works accumulated 3 violations over five years, all have been formally resolved — the provider currently meets EPA standards for 2,174 people.

Data: EPA SDWIS Last verified: 2026-04-02

C · 64
Avg Safety Score
2,174
People Served
2
ZIP Codes Served
3
Violations (5yr)
Surface Water
Water Source
0.002 mg/L
Max Lead Level
Zone 1
Radon Risk · High
3
Contaminants Flagged
$299K
Median Home Value in Service Area

Compliance Trajectory

Stable · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 2 (2023) to 2 (2024). Violation counts have remained relatively steady.

Service Area Map

Coverage area for Midway Municipal Water Works Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$82,249
Median Household Income
28,232
Service Area Population
0%
Disadvantaged Population
40th
Poverty Percentile
40th
Energy Burden Percentile
57%
Pre-1986 Housing

The Midway Municipal Water Works serves a community with a median household income of $82,249 and an estimated 28,232 residents across its service area. Approximately 57% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

Midway Municipal Water Works's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
30th
Wastewater Discharge Proximity
10th
Superfund Site Proximity

About 0% of homes in Woodford County, Kentucky rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

47 yr
Avg Pipe Age
Copper
Pipe Material
24 yr
Est. Remaining Life
Stable
Decay Status
Installed 66% of expected lifespan used End of life

Detected Contaminants

How Midway Municipal Water Works compares to EPA limits

Total Trihalomethanes (TTHM) 1 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns

What This Means For You

Total Trihalomethanes (TTHM) at 1 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 10 detections recorded.

State limits: PFOA: 0.004 ppt, PFOS: 0.004 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Kentucky

Hanson Water System
2,157 people
B 5 violations
Clay City Water System
2,153 people
0 violations
Livermore Water Works
2,138 people
0 violations
D 1 violation
New Castle Water Works
2,100 people
B 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,800
Radon Mitigation $1,200
PFAS Treatment $500
Water Filtration $150
Total Estimated Cost $3,650

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $3,650 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Midway Municipal Water Works (EPA ID: KY1200283) is a community water system in Kentucky that serves approximately 2,174 people from surface water sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: C (64/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

3 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
January 1, 2024 Total Trihalomethanes (TTHM) Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Total Trihalomethanes (TTHM) Disinfection Byproducts 1 No
Surface Water Treatment Rule Treatment Failure 1 No
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
40347 0.002 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by KY or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Midway Municipal Water Works (KY1200283) on EPA.gov.

Frequently Asked Questions

Is Midway Municipal Water Works water safe to drink?

Midway Municipal Water Works has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Midway Municipal Water Works serve?

Midway Municipal Water Works serves approximately 2,174 people across 2 ZIP codes in Kentucky.

Where does Midway Municipal Water Works get its water?

The primary water source is surface water.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Purchased from another utility
Treated water purchased wholesale from another water system.
Disinfectant used
Chlorine

Source: Midway Municipal Water Works Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment classification and chemical list sourced from Midway Municipal Water Works Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
242
Unknown Material
566
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 2,174
Reported to Kentucky

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • MONITORING, ROUTINE (DBP), MAJOR · Haloacetic Acids (HAA5)
    2024-01-01 to 2024-03-31
    We failed to test our drinking water for the contaminant and period indicated. Because of this failure, we cannot be sure of the quality of our drinking water during the period indicated.
  • MONITORING, ROUTINE (DBP), MAJOR · Total Trihalomethanes (TTHM)
    2024-01-01 to 2024-03-31
    We failed to test our drinking water for the contaminant and period indicated. Because of this failure, we cannot be sure of the quality of our drinking water during the period indicated.

Violations record from Midway Municipal Water Works Consumer Confidence Report.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from Midway Municipal Water Works safe to drink?
Midway Municipal Water Works has a C safety grade based on 3 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Midway Municipal Water Works's water?
Detected contaminants include Total Trihalomethanes (TTHM), Surface Water Treatment Rule, Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Midway Municipal Water Works serve?
Midway Municipal Water Works serves approximately 2,174 people with drinking water across 2 ZIP codes.
What is Midway Municipal Water Works's water source?
Midway Municipal Water Works draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Midway Municipal Water Works's water?
The maximum detected lead level is 0.002 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Midway Municipal Water Works's service area?
The Midway Municipal Water Works service area has a median household income of $82,249. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Midway Municipal Water Works get its water?
Midway Municipal Water Works's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Midway Municipal Water Works (EPA ID: KY1200283) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Kentucky Midway Municipal Water Works

Get safety alerts for Midway Municipal Water Works, Kentucky

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.