Water System Report KY

Warren County Water District

EPA ID: KY1140487 · 91,118 people served · 13 ZIP codes

Warren County Water District earns a clean bill from EPA monitoring — no violations in five years across a service area of 91,118 people.

Data: EPA SDWIS Last verified: 2026-04-02

C · 61
Avg Safety Score
91,118
People Served
13
ZIP Codes Served
0
Violations (5yr)
Surface Water
Water Source
0.002 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
0
Contaminants Flagged
$193K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 2 (2022) to 3 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Warren County Water District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$65,630
Median Household Income
186,835
Service Area Population
42%
Disadvantaged Population
55th
Poverty Percentile
56th
Energy Burden Percentile
48%
Pre-1986 Housing

The Warren County Water District serves a community with a median household income of $65,630 and an estimated 186,835 residents across its service area. Approximately 48% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 42% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Warren County Water District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
52th
Wastewater Discharge Proximity
32th
Superfund Site Proximity

About 1% of homes in Warren County, Kentucky rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

42 yr
Avg Pipe Age
Copper
Pipe Material
28 yr
Est. Remaining Life
Stable
Decay Status
Installed 60% of expected lifespan used End of life

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 4 detections recorded.

State limits: PFOA: 0.004 ppt, PFOS: 0.004 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Kentucky

C 1 violation
C 4 violations
Paducah Water Works
65,004 people
B 0 violations
B 0 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,162
Radon Mitigation $462
PFAS Treatment $154
Water Filtration $23
Total Estimated Cost $1,800

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$165
10 years
$330
20 years
$660

Compare: Estimated remediation cost is $1,800 (one-time) vs. $330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Warren County Water District (EPA ID: KY1140487) is a community water system in Kentucky that serves approximately 91,118 people from surface water sources.

This system provides water to 13 ZIP codes across 10 communities.

Average Home Safety Score: C (61/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
42101 0.002 mg/L No N/A
42102 0.002 mg/L No N/A
42103 0.002 mg/L No N/A
42104 0.002 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 11 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 2 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Warren County Water District (KY1140487) on EPA.gov.

Frequently Asked Questions

Is Warren County Water District water safe to drink?

Based on EPA records, Warren County Water District has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does Warren County Water District serve?

Warren County Water District serves approximately 91,118 people across 13 ZIP codes in Kentucky.

Where does Warren County Water District get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
270-842-0052
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
523 US 31 W Bypass, Bowling Green, KY

Contact information from Warren County Water District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Purchased from another utility
Treated water purchased wholesale from another water system.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorinefluoride

Source: Warren County Water District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from Warren County Water District Consumer Confidence Report:
An analysis indicates that BGMU's system susceptibility to contamination is generally moderate. Areas of concern include potential contaminant sources such as bridges, underground storage tanks, an inactive landfill, oil and gas wells, a KPES permitted discharger, and agricultural chemical use in the areas near and surrounding the raw water intake.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Multi-stage
Multiple treatment stages — typically coagulation, filtration, and disinfection. Common for surface-water systems requiring removal of particulates, microorganisms, and dissolved organic compounds before disinfection.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine
Fluoridation
Added at low levels per state or local public-health policy for dental health.
fluoride

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

BridgesUnderground storage tanksInactive landfillOil and gas wellsKPES permitted dischargerAgricultural chemical use

Treatment classification and chemical list sourced from Warren County Water District Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
37,177
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 91,118
Reported to Kentucky

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Warren County Water District safe to drink?
Warren County Water District has a C safety grade based on 0 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
Should I use a water filter?
Warren County Water District meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does Warren County Water District serve?
Warren County Water District serves approximately 91,118 people with drinking water across 13 ZIP codes.
What is Warren County Water District's water source?
Warren County Water District draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Warren County Water District's water?
The maximum detected lead level is 0.002 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Warren County Water District's service area?
The Warren County Water District service area has a median household income of $65,630. EPA EJScreen data classifies 42% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Warren County Water District get its water?
Warren County Water District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Warren County Water District (EPA ID: KY1140487) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Kentucky Warren County Water District

Get safety alerts for Warren County Water District, Kentucky

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.