Beaver Dam Municipal Water & Sewer
EPA ID: KY0920025 · 3,901 people served · 3 ZIP codes
ZipCheckup's reading of EPA SDWIS for Beaver Dam Municipal Water & Sewer (KY0920025): 1 EPA violation in the last five years. Even though Beaver Dam Municipal Water & Sewer accumulated 1 violation over five years, all have been formally resolved - the provider currently meets EPA standards for 3,901 people.
Data: EPA SDWIS
Service Area Map
Coverage area for Beaver Dam Municipal Water & Sewer Source: EPA SDWIS service area boundaries.
Service area boundary
Service Area Demographics
The Beaver Dam Municipal Water & Sewer serves a community with a median household income of $50,777 and an estimated 15,506 residents across its service area. Approximately 57% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 86% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
💧 Where Does Your Water Come From?
Beaver Dam Municipal Water & Sewer's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
Wastewater Proximity Note: This service area ranks in the 70th percentile nationally for proximity to wastewater discharge points.
Infrastructure Risk
Detected Contaminants
How Beaver Dam Municipal Water & Sewer compares to EPA limits
What This Means For You
Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 1 detection recorded. 1 exceeds federal EPA limits (4 ppt for PFOA/PFOS). 1 exceeds state limits.
Comparable Water Systems
Similar-sized systems in Kentucky
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Beaver Dam Municipal Water & Sewer (EPA ID: KY0920025) is a community water system in Kentucky that serves approximately 3,901 people from groundwater sources.
This system provides water to 3 ZIP codes across 3 communities.
Violation History
Status breakdown for accepted records with record years 2021-2026: 1 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 1, 2021 | Surface Water Treatment Rule | Non-health-based | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Surface Water Treatment Rule | Treatment Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule evidence attributed directly to this water system:
| Lead Level | Exceeds Action Level | Sample Date |
|---|---|---|
| 0 mg/L | No | N/A |
No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by KY or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Beaver Dam Municipal Water & Sewer (KY0920025) on EPA.gov.
Frequently Asked Questions
Is Beaver Dam Municipal Water & Sewer water safe to drink?
The accepted 2026Q2 ECHO snapshot shows no current noncompliance for Beaver Dam Municipal Water & Sewer; its 1 accepted 2021-2026 record are resolved or archived. Historical compliance status does not establish conditions at a specific tap.
How many people does Beaver Dam Municipal Water & Sewer serve?
Beaver Dam Municipal Water & Sewer serves approximately 3,901 people across 3 ZIP codes in Kentucky.
Where does Beaver Dam Municipal Water & Sewer get its water?
The primary water source is groundwater.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Frequently Asked Questions
How to cite this page
ZipCheckup. (n.d.). Beaver Dam Municipal Water and Sewer (KY): 1 EPA Violation. https://zipcheckup.com/water-system/ky0920025/
@misc{zipcheckup-water-system-ky0920025,
author = {{ZipCheckup}},
title = {{Beaver Dam Municipal Water and Sewer (KY): 1 EPA Violation}},
year = {n.d.},
url = {https://zipcheckup.com/water-system/ky0920025/}
}
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Beaver Dam Municipal Water & Sewer (EPA ID: KY0920025) - request the latest Consumer Confidence Report or ask about specific contaminants.