Current Health-Based Noncompliance KY 1 HEALTH VIOLATION

Meade County Water District

EPA ID: KY0820369 ยท 33,313 people served ยท 10 ZIP codes

ZipCheckup's reading of EPA SDWIS for Meade County Water District (KY0820369): 1 unresolved EPA violation on record. In the current EPA monitoring period, Meade County Water District has 1 violation still listed as unresolved, with the utility supplying water to approximately 33,313 residents.

Data: EPA SDWIS

33,313
People Served
10
ZIP Codes Served
3
Violations (5yr)
Surface Water
Water Source
0.002 mg/L
Max Lead Level
Zone 2
Radon Risk ยท Moderate
1
Contaminants Flagged
$186K
Median Home Value in Service Area

Service Area Map

Coverage area for Meade County Water District Source: EPA SDWIS service area boundaries.

Service area boundary

Service Area Demographics

$70,271
Median Household Income
45,568
Service Area Population
30%
Disadvantaged Population
60th
Poverty Percentile
54th
Energy Burden Percentile
45%
Pre-1986 Housing

The Meade County Water District serves a community with a median household income of $70,271 and an estimated 45,568 residents across its service area. Approximately 45% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

๐ŸŒŠ Where Does Your Water Come From?

Surface Water

Meade County Water District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
32th
Wastewater Discharge Proximity
44th
Superfund Site Proximity

Infrastructure Risk

34 yr
Avg Pipe Age
Copper
Pipe Material
36 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 49% of expected lifespan used End of life

Detected Contaminants

How Meade County Water District compares to EPA limits

What This Means For You

Consumer Confidence Report Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Kentucky

C 0 violations
0 violations
0 violations
0 violations
Franklin Water Works
31,602 people
B 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation Water Filtration
Flood Insurance $780
Radon Mitigation $400
Water Filtration $30
Total Estimated Cost $1,210

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $1,210 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Meade County Water District (EPA ID: KY0820369) is a community water system in Kentucky that serves approximately 33,313 people from surface water sources.

This system provides water to 10 ZIP codes across 10 communities.

Violation History

1 current health-based noncompliance record in the accepted 2026Q2 snapshot.

Status breakdown for accepted records with record years 2021-2026: 2 resolved, 0 archived, 0 addressed, and 1 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
February 1, 2026 Consumer Confidence Report Rule Health-based Unaddressed (current)
May 1, 2022 Consumer Confidence Report Rule Non-health-based Resolved
February 1, 2021 Consumer Confidence Report Rule Non-health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Consumer Confidence Report Rule Reporting Failure 3 Yes

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0.002 mg/L No N/A

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking โ€” this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by KY or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Meade County Water District (KY0820369) on EPA.gov.

Frequently Asked Questions

Is Meade County Water District water safe to drink?

The accepted 2026Q2 ECHO snapshot shows 1 current health-based noncompliance record for Meade County Water District. Review the utility's current notices and EPA record. This system-level compliance history cannot determine conditions at a specific tap.

How many people does Meade County Water District serve?

Meade County Water District serves approximately 33,313 people across 10 ZIP codes in Kentucky.

Where does Meade County Water District get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
87

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) โ€” per-system federal sampling, 2023โ€“2025. EPA UCMR5 monitoring program โ†’

Understand PFAS health context and filtration โ†’

Frequently Asked Questions

What contaminants are in Meade County Water District's water?
Detected contaminants include Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Meade County Water District serve?
Meade County Water District serves approximately 33,313 people with drinking water across 10 ZIP codes.
What is Meade County Water District's water source?
Meade County Water District draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Meade County Water District's water?
The maximum detected lead level is 0.002 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Meade County Water District's service area?
The Meade County Water District service area has a median household income of $70,271. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Meade County Water District get its water?
Meade County Water District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on the exported violation history and environmental factors, the source contamination risk is classified as elevated.

How to cite this page

APA ZipCheckup. (n.d.). Meade County Water District (KY): 1 Health Violation. https://zipcheckup.com/water-system/ky0820369/
BibTeX
@misc{zipcheckup-water-system-ky0820369,
  author = {{ZipCheckup}},
  title  = {{Meade County Water District (KY): 1 Health Violation}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/ky0820369/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

Meade County Water District (EPA ID: KY0820369) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Kentucky Meade County Water District

Get safety alerts for Meade County Water District, Kentucky

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.