Health Violations Found KY 2 HEALTH VIOLATIONS

Martin Company Water District #1

EPA ID: KY0800273 · 9,003 people served · 9 ZIP codes

Records for Martin Company Water District #1 show 2 violations over the monitored period, with every finding addressed and officially closed — the provider, which serves approximately 9,003 people, carries no outstanding enforcement actions in the current EPA dataset and meets all applicable drinking water requirements.

Data: EPA SDWIS Last verified: 2026-04-02

C · 57
Avg Safety Score
9,003
People Served
9
ZIP Codes Served
2
Violations (5yr)
Surface Water
Water Source
0.002 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
1
Contaminants Flagged
$86K
Median Home Value in Service Area

Compliance Trajectory

Stable · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 10 (2021) to 3 (2025). Violation counts have remained relatively steady.

Service Area Map

Coverage area for Martin Company Water District #1 Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$45,240
Median Household Income
23,855
Service Area Population
100%
Disadvantaged Population
82th
Poverty Percentile
98th
Energy Burden Percentile
51%
Pre-1986 Housing

The Martin Company Water District #1 serves a community with a median household income of $45,240 and an estimated 23,855 residents across its service area. Approximately 51% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 100% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Martin Company Water District #1's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
86th
Wastewater Discharge Proximity
12th
Superfund Site Proximity

About 1% of homes in Martin County, Kentucky rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Wastewater Proximity Note: This service area ranks in the 86th percentile nationally for proximity to wastewater discharge points. Surface water sources near wastewater outfalls may face additional treatment challenges.

Infrastructure Risk

41 yr
Avg Pipe Age
Copper
Pipe Material
29 yr
Est. Remaining Life
Stable
Decay Status
Installed 59% of expected lifespan used End of life

Detected Contaminants

How Martin Company Water District #1 compares to EPA limits

What This Means For You

Fecal Coliform at 2 presence exceeds the EPA maximum of presence.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 6 detections recorded. 2 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.004 ppt, PFOS: 0.004 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Kentucky

Albany Water Works
9,042 people
C 7 violations
0 violations
0 violations
0 violations
C 3 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,200
Radon Mitigation $400
PFAS Treatment $133
Water Filtration $33
Total Estimated Cost $1,767

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $1,767 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

MARTIN CO WATER DISTRICT #1 (EPA ID: KY0800273) is a community water system in Kentucky that serves approximately 9,003 people from surface water sources.

This system provides water to 9 ZIP codes across 9 communities.

Average Home Safety Score: C (57/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 health-based violations recorded in the past 5 years. All violations have been resolved.

Recent Violations

Date Contaminant Type Status
November 1, 2023 Fecal Coliform Health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Fecal Coliform Microbiological 2 Yes

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
41224 0.002 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 8 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Martin Company Water District #1 (KY0800273) on EPA.gov.

Frequently Asked Questions

Is Martin Company Water District #1 water safe to drink?

Martin Company Water District #1 has recorded 2 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Martin Company Water District #1 serve?

Martin Company Water District #1 serves approximately 9,003 people across 9 ZIP codes in Kentucky.

Where does Martin Company Water District #1 get its water?

The primary water source is surface water.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Surface water
Drawn from rivers, lakes, or reservoirs.
Disinfectant used
Chlorine

Source: Martin Company Water District #1 Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from Martin Company Water District #1 Consumer Confidence Report:
Source Water Assessment includes Curtis Crum Reservoir, Tug Fork Big Sandy River, and purchased water from KY0980575 Mountain Water and WV3303003 Kermit, WV.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment classification and chemical list sourced from Martin Company Water District #1 Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

1
Confirmed Lead
11
Galvanized — Replacement Required
779
Unknown Material
2,559
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 9,003
Reported to Kentucky

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Martin Company Water District #1 safe to drink?
Martin Company Water District #1 has a C safety grade based on 2 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Martin Company Water District #1's water?
Detected contaminants include Fecal Coliform. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Martin Company Water District #1 serve?
Martin Company Water District #1 serves approximately 9,003 people with drinking water across 9 ZIP codes.
What is Martin Company Water District #1's water source?
Martin Company Water District #1 draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Martin Company Water District #1's water?
The maximum detected lead level is 0.002 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Martin Company Water District #1's service area?
The Martin Company Water District #1 service area has a median household income of $45,240. EPA EJScreen data classifies 100% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Martin Company Water District #1 get its water?
Martin Company Water District #1's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Martin Company Water District #1 (EPA ID: KY0800273) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Kentucky Martin Company Water District #1

Get safety alerts for Martin Company Water District #1, Kentucky

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.