Jonathan Creek Water District
EPA ID: KY0790216 · 7,182 people served · 4 ZIP codes
Zero EPA violations over five years — Jonathan Creek Water District has kept tap water compliance clean for its full service population of 7,182.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for Jonathan Creek Water District Source: EPA SDWIS service area boundaries.
Service area boundary
Service Area Demographics
The Jonathan Creek Water District serves a community with a median household income of $63,176 and an estimated 27,381 residents across its service area. Approximately 47% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
Jonathan Creek Water District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 1% of homes in Marshall County, Kentucky rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 2 detections recorded. 1 exceeds federal EPA limits (4 ppt for PFOA/PFOS). 1 exceeds state limits.
Comparable Water Systems
Similar-sized systems in Kentucky
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Jonathan Creek Water District (EPA ID: KY0790216) is a community water system in Kentucky that serves approximately 7,182 people from groundwater sources.
This system provides water to 4 ZIP codes across 4 communities.
Violation History
Lead & Copper
No Lead and Copper Rule sampling data available for this water system.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by KY or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Jonathan Creek Water District (KY0790216) on EPA.gov.
Frequently Asked Questions
Is Jonathan Creek Water District water safe to drink?
Based on EPA records, Jonathan Creek Water District has no recorded violations in the past 5 years — a positive indicator of water quality management.
How many people does Jonathan Creek Water District serve?
Jonathan Creek Water District serves approximately 7,182 people across 4 ZIP codes in Kentucky.
Where does Jonathan Creek Water District get its water?
The primary water source is groundwater.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.