Monitoring Violations KY

Russellville Mun Water Works

EPA ID: KY0710378 · 8,613 people served · 4 ZIP codes

Over the past five years, Russellville Mun Water Works recorded 2 violations, all subsequently resolved through the EPA enforcement process — the supplier currently operates in good standing, with no active actions on file for its 8,613 residents.

Data: EPA SDWIS Last verified: 2026-04-02

C · 61
Avg Safety Score
8,613
People Served
4
ZIP Codes Served
2
Violations (5yr)
Surface Water
Water Source
Zone 2
Radon Risk · Moderate
2
Contaminants Flagged
$155K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 3 (2021) to 6 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Russellville Mun Water Works Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$64,608
Median Household Income
27,761
Service Area Population
67%
Disadvantaged Population
70th
Poverty Percentile
80th
Energy Burden Percentile
59%
Pre-1986 Housing

The Russellville Mun Water Works serves a community with a median household income of $64,608 and an estimated 27,761 residents across its service area. Approximately 59% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 67% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Russellville Mun Water Works's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
50th
Wastewater Discharge Proximity
60th
Superfund Site Proximity

About 1% of homes in Logan County, Kentucky rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 60th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

42 yr
Avg Pipe Age
Copper
Pipe Material
28 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 60% of expected lifespan used End of life

Detected Contaminants

How Russellville Mun Water Works compares to EPA limits

Total Trihalomethanes (TTHM) 1 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns

What This Means For You

Total Trihalomethanes (TTHM) at 1 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 3 detections recorded.

State limits: PFOA: 0.004 ppt, PFOS: 0.004 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Kentucky

Edmonton Water Works
8,515 people
D 0 violations
B 0 violations
0 violations
D 9 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,050
Radon Mitigation $400
PFAS Treatment $375
Water Filtration $225
Total Estimated Cost $2,050

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,050 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

RUSSELLVILLE MUN WATER WORKS (EPA ID: KY0710378) is a community water system in Kentucky that serves approximately 8,613 people from surface water sources.

This system provides water to 4 ZIP codes across 4 communities.

Average Home Safety Score: C (61/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Total Trihalomethanes (TTHM) Disinfection Byproducts 1 No
Surface Water Treatment Rule Treatment Failure 1 No

Lead & Copper

No Lead and Copper Rule sampling data available for this water system.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by KY or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Russellville Mun Water Works (KY0710378) on EPA.gov.

Frequently Asked Questions

Is Russellville Mun Water Works water safe to drink?

Russellville Mun Water Works has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Russellville Mun Water Works serve?

Russellville Mun Water Works serves approximately 8,613 people across 4 ZIP codes in Kentucky.

Where does Russellville Mun Water Works get its water?

The primary water source is surface water.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Purchased from another utility
Treated water purchased wholesale from another water system.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: Russellville Mun Water Works Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Treatment classification and chemical list sourced from Russellville Mun Water Works Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
116
Detections
1
Latest sample
4/18/2023
Highest analyte
PFBA: 5.4 ppt
Analyte Max detected Current MCL Status
PFBA 5.4 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
465
Galvanized — Replacement Required
2,229
Unknown Material
1,060
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 8,613
Reported to Kentucky

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Russellville Mun Water Works safe to drink?
Russellville Mun Water Works has a C safety grade based on 2 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Russellville Mun Water Works's water?
Detected contaminants include Total Trihalomethanes (TTHM), Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Russellville Mun Water Works serve?
Russellville Mun Water Works serves approximately 8,613 people with drinking water across 4 ZIP codes.
What is Russellville Mun Water Works's water source?
Russellville Mun Water Works draws water from surface water sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of Russellville Mun Water Works's service area?
The Russellville Mun Water Works service area has a median household income of $64,608. EPA EJScreen data classifies 67% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Russellville Mun Water Works get its water?
Russellville Mun Water Works's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Russellville Mun Water Works (EPA ID: KY0710378) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Kentucky Russellville Mun Water Works

Get safety alerts for Russellville Mun Water Works, Kentucky

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.