Health Violations Found KY 2 HEALTH VIOLATIONS

Evarts Municipal Water Plant

EPA ID: KY0480125 · 3,059 people served · 9 ZIP codes

Evarts Municipal Water Plant shows 1 open EPA violation in current federal records for approximately 3,059 people.

Data: EPA SDWIS Last verified: 2026-04-02

C · 62
Avg Safety Score
3,059
People Served
9
ZIP Codes Served
6
Violations (5yr)
Surface Water
Water Source
0.004 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
3
Contaminants Flagged
$63K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 9 (2023) to 4 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Evarts Municipal Water Plant Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$36,797
Median Household Income
10,627
Service Area Population
100%
Disadvantaged Population
90th
Poverty Percentile
90th
Energy Burden Percentile
73%
Pre-1986 Housing

The Evarts Municipal Water Plant serves a community with a median household income of $36,797 and an estimated 10,627 residents across its service area. Approximately 73% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 100% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Evarts Municipal Water Plant's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
60th
Superfund Site Proximity

About 2% of homes in Harlan County, Kentucky rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 60th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

57 yr
Avg Pipe Age
Copper
Pipe Material
15 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 79% of expected lifespan used End of life

Detected Contaminants

How Evarts Municipal Water Plant compares to EPA limits

What This Means For You

Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Fecal Coliform at 2 presence exceeds the EPA maximum of presence.

Comparable Water Systems

Similar-sized systems in Kentucky

C 3 violations
0 violations
Lewisburg Water Works
3,119 people
C 14 violations
0 violations
C 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation Water Filtration
Flood Insurance $800
Radon Mitigation $400
Water Filtration $33
Total Estimated Cost $1,233

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$5,000
10 years
$10,000
20 years
$20,000

Compare: Estimated remediation cost is $1,233 (one-time) vs. $10,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

EVARTS MUNICIPAL WATER PLANT (EPA ID: KY0480125) is a community water system in Kentucky that serves approximately 3,059 people from surface water sources.

This system provides water to 9 ZIP codes across 9 communities.

Average Home Safety Score: C (62/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 health-based violations recorded in the past 5 years. 1 remains unresolved.

Recent Violations

Date Contaminant Type Status
July 2, 2025 Stage 2 DBP Rule Monitoring Unresolved
July 1, 2025 Consumer Confidence Report Rule Monitoring Resolved
October 17, 2024 Stage 2 DBP Rule Monitoring Resolved
November 1, 2023 Fecal Coliform Health-based Resolved
October 1, 2023 Consumer Confidence Report Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 2 DBP Rule Treatment Failure 2 No
Consumer Confidence Report Rule Reporting Failure 2 No
Fecal Coliform Microbiological 2 Yes

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
40828 0.004 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 4 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 5 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Evarts Municipal Water Plant (KY0480125) on EPA.gov.

Frequently Asked Questions

Is Evarts Municipal Water Plant water safe to drink?

Evarts Municipal Water Plant has recorded 2 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Evarts Municipal Water Plant serve?

Evarts Municipal Water Plant serves approximately 3,059 people across 9 ZIP codes in Kentucky.

Where does Evarts Municipal Water Plant get its water?

The primary water source is surface water.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: Evarts Municipal Water Plant Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Treatment classification and chemical list sourced from Evarts Municipal Water Plant Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
480
Unknown Material
523
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Compliance issue flagged by EPA under Rule 4G.
Population served: 3,059
Reported to Kentucky

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Evarts Municipal Water Plant safe to drink?
Evarts Municipal Water Plant has a C safety grade based on 6 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Evarts Municipal Water Plant's water?
Detected contaminants include Stage 2 DBP Rule, Consumer Confidence Report Rule, Fecal Coliform. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Evarts Municipal Water Plant serve?
Evarts Municipal Water Plant serves approximately 3,059 people with drinking water across 9 ZIP codes.
What is Evarts Municipal Water Plant's water source?
Evarts Municipal Water Plant draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Evarts Municipal Water Plant's water?
The maximum detected lead level is 0.004 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Evarts Municipal Water Plant's service area?
The Evarts Municipal Water Plant service area has a median household income of $36,797. EPA EJScreen data classifies 100% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Evarts Municipal Water Plant get its water?
Evarts Municipal Water Plant's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Evarts Municipal Water Plant (EPA ID: KY0480125) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Kentucky Evarts Municipal Water Plant

Get safety alerts for Evarts Municipal Water Plant, Kentucky

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.