Fulton Municipal Water System
EPA ID: KY0380149 · 4,662 people served · 4 ZIP codes
Fulton Municipal Water System recorded 1 EPA violation over the past five years, all of which have since been resolved — the utility is currently in compliance serving 4,662 residents.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Stable · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 4 (2022) to 1 (2023). Violation counts have remained relatively steady.
Service Area Map
Coverage area for Fulton Municipal Water System Source: EPA SDWIS service area boundaries.
Service area boundary — Grade B
Service Area Demographics
The Fulton Municipal Water System serves a community with a median household income of $46,173 and an estimated 12,019 residents across its service area. Approximately 75% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 86% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
💧 Where Does Your Water Come From?
Fulton Municipal Water System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 1% of homes in Hickman County, Kentucky rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Wastewater Proximity Note: This service area ranks in the 70th percentile nationally for proximity to wastewater discharge points.
Infrastructure Risk
Detected Contaminants
How Fulton Municipal Water System compares to EPA limits
What This Means For You
Contaminant 0700 at 1 mg/L exceeds the EPA maximum of mg/L.
Comparable Water Systems
Similar-sized systems in Kentucky
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Fulton Municipal Water System (EPA ID: KY0380149) is a community water system in Kentucky that serves approximately 4,662 people from groundwater sources.
This system provides water to 4 ZIP codes across 4 communities.
Average Home Safety Score: B (73/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Contaminant 0700 | Other Violation | 1 | Yes |
Lead & Copper
No Lead and Copper Rule sampling data available for this water system.
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: 3 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Fulton Municipal Water System (KY0380149) on EPA.gov.
Frequently Asked Questions
Is Fulton Municipal Water System water safe to drink?
Fulton Municipal Water System has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.
How many people does Fulton Municipal Water System serve?
Fulton Municipal Water System serves approximately 4,662 people across 4 ZIP codes in Kentucky.
Where does Fulton Municipal Water System get its water?
The primary water source is groundwater.
Water Source & Treatment
Where this water originates and how it's treated before reaching your tap.
Source: Fulton Municipal Water System Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.
Treatment regime
How this utility classifies its treatment process and what each reported treatment chemical does.
Treatment chemicals and what each one does
Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.
Treatment classification and chemical list sourced from Fulton Municipal Water System Consumer Confidence Report.
Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Fulton Municipal Water System (EPA ID: KY0380149) — request the latest Consumer Confidence Report or ask about specific contaminants.