Health Violations Found IL 1 HEALTH VIOLATION

Olney

EPA ID: IL1590200 · 8,877 people served · 2 ZIP codes

Olney carries 46 open EPA violations that remain unresolved in the federal system — approximately 8,877 people fall within its service area.

Data: EPA SDWIS Last verified: 2026-04-02

B · 82
Avg Safety Score
8,877
People Served
2
ZIP Codes Served
114
Violations (5yr)
Surface Water
Water Source
0.0044 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
8
Contaminants Flagged
$105K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 1 (2022) to 1 (2024). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Olney Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$58,928
Median Household Income
13,983
Service Area Population
40%
Disadvantaged Population
60th
Poverty Percentile
90th
Energy Burden Percentile
67%
Pre-1986 Housing

The Olney serves a community with a median household income of $58,928 and an estimated 13,983 residents across its service area. Approximately 67% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 40% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Olney's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
30th
Superfund Site Proximity

About 1% of homes in Richland County, Illinois rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

51 yr
Avg Pipe Age
Copper
Pipe Material
20 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 72% of expected lifespan used End of life

Detected Contaminants

How Olney compares to EPA limits

Contaminant 1006 22 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.006 mg/L
Cholesterol & blood sugar effects, liver damage
Total Trihalomethanes (TTHM) 2 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns
Haloacetic Acids (HAA5) 1 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.06 mg/L
Cancer risk; reproductive & developmental effects

What This Means For You

Contaminant 1006 at 22 mg/L exceeds the EPA maximum of 0.006 mg/L. Cholesterol & blood sugar effects, liver damage. Consider reverse osmosis filtration.

Consumer Confidence Report Rule at 45 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 32 mg/L exceeds the EPA maximum of mg/L.

Total Trihalomethanes (TTHM) at 2 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Haloacetic Acids (HAA5) at 1 mg/L exceeds the EPA maximum of 0.06 mg/L. Cancer risk; reproductive & developmental effects. Consider granular activated carbon (GAC) filtration.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 2 detections recorded.

State limits: PFOA: 0.002 ppt, PFOS: 0.014 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Contaminant 1006 was detected in this water system. reverse osmosis filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Illinois

0 violations
Monmouth
8,902 people
C 6 violations
Glencoe
8,849 people
C 0 violations
Lake Villa
8,829 people
B 1 violation
Glenwood
8,956 people
B 4 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

PFAS Treatment Radon Mitigation Water Filtration
PFAS Treatment $500
Radon Mitigation $400
Water Filtration $300
Total Estimated Cost $1,200

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$7,665
10 years
$15,330
20 years
$30,660

Compare: Estimated remediation cost is $1,200 (one-time) vs. $15,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Olney (EPA ID: IL1590200) is a community water system in Illinois that serves approximately 8,877 people from surface water sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: B (82/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 health-based violation recorded in the past 5 years. 46 remain unresolved.

Recent Violations

Date Contaminant Type Status
September 1, 2025 Consumer Confidence Report Rule Monitoring Unresolved
September 1, 2025 Contaminant 1006 Monitoring Unresolved
August 1, 2025 Consumer Confidence Report Rule Monitoring Unresolved
August 1, 2025 Contaminant 1006 Monitoring Resolved
July 31, 2025 Lead and Copper Rule Monitoring Resolved
July 12, 2025 Lead and Copper Rule Monitoring Resolved
July 1, 2025 Stage 1 DBP Rule Monitoring Resolved
July 1, 2025 Surface Water Treatment Rule Monitoring Resolved
July 1, 2025 Consumer Confidence Report Rule Monitoring Unresolved
July 1, 2025 Contaminant 1006 Monitoring Resolved
June 7, 2025 Lead and Copper Rule Monitoring Resolved
June 1, 2025 Consumer Confidence Report Rule Monitoring Resolved
June 1, 2025 Contaminant 1006 Monitoring Resolved
May 1, 2025 Consumer Confidence Report Rule Monitoring Resolved
May 1, 2025 Contaminant 1006 Monitoring Resolved
April 19, 2025 Lead and Copper Rule Monitoring Resolved
April 1, 2025 Consumer Confidence Report Rule Monitoring Resolved
April 1, 2025 Contaminant 1006 Monitoring Resolved
March 26, 2025 Lead and Copper Rule Monitoring Resolved
March 1, 2025 Consumer Confidence Report Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Consumer Confidence Report Rule Reporting Failure 45 No
Lead and Copper Rule Treatment Failure 32 No
Contaminant 1006 Other Violation 22 No
Stage 1 DBP Rule Treatment Failure 7 No
Surface Water Treatment Rule Treatment Failure 3 No
Total Trihalomethanes (TTHM) Disinfection Byproducts 2 No
Stage 2 DBP Rule Treatment Failure 2 Yes
Haloacetic Acids (HAA5) Disinfection Byproducts 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
62450 0.0044 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IL or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Olney (IL1590200) on EPA.gov.

Frequently Asked Questions

Is Olney water safe to drink?

Olney has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Olney serve?

Olney serves approximately 8,877 people across 2 ZIP codes in Illinois.

Where does Olney get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Contact information from OLNEY Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Surface water
Drawn from rivers, lakes, or reservoirs.
Disinfectant used
Chloramines
Treatment chemicals reported
chloramines

Source: OLNEY Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chloramines

Treatment classification and chemical list sourced from OLNEY Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
4,425
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 8,877
Reported to Illinois

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • monitoring · Total Trihalomethanes (TTHM)
    2024-04-01/2024-06-30
    Failed to test drinking water for TTHMs during the period indicated.

Violations record from OLNEY Consumer Confidence Report.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from Olney safe to drink?
Olney earns a B safety grade with 114 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Olney's water?
Detected contaminants include Contaminant 1006, Consumer Confidence Report Rule, Lead and Copper Rule, Total Trihalomethanes (TTHM). Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 5 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Olney serve?
Olney serves approximately 8,877 people with drinking water across 2 ZIP codes.
What is Olney's water source?
Olney draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Olney's water?
The maximum detected lead level is 0.0044 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Olney's service area?
The Olney service area has a median household income of $58,928. EPA EJScreen data classifies 40% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Olney get its water?
Olney's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Olney (EPA ID: IL1590200) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Illinois Olney

Get safety alerts for Olney, Illinois

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.