Historical Compliance Records IA 1 HEALTH-BASED VIOLATION ON RECORD

Milford Municipal Utilities

EPA ID: IA3050079 ยท 3,431 people served ยท 5 ZIP codes

ZipCheckup's reading of EPA records for Milford Municipal Utilities (IA3050079): 1 health-based violation recorded since 2021. Milford Municipal Utilities has 1 EPA violation on record, all marked resolved in the federal data; the utility serves 3,431 residents.

Data: EPA SDWIS

3,431
People Served
5
ZIP Codes Served
1
Violations (since 2021)
Surface Water
Water Source
0.002 mg/L
Most recent lead 90th percentile on record (monitoring period ending 2023-12-31)
Zone 1
County Radon Potential ยท High
1
Contaminants Flagged
$256K
Median Home Value in ZIP Codes Served

Service Area Map

Coverage area for Milford Municipal Utilities Source: EPA SDWIS service area boundaries.

Service area boundary

Demographics of ZIP Codes Served

$67,628
Median Household Income
16,218
Population of ZIP Codes Served (Census)
0%
Disadvantaged Population
40th
Poverty Percentile
80th
Energy Burden Percentile
63%
Pre-1986 Housing

The ZIP codes associated with Milford Municipal Utilities have a median household income of $67,628 and about 16,218 residents live in those ZIP codes (Census; not the number of people this system supplies). Approximately 63% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

๐ŸŒŠ Where Does Your Water Come From?

Surface Water

Milford Municipal Utilities's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
0th
Wastewater Discharge Proximity
0th
Superfund Site Proximity

Infrastructure Risk

53 yr
Estimated pipe age (modeled from housing age)
Copper
Likely pipe material (modeled)
18 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 75% of expected lifespan used (estimate) End of life

PFAS in ZIP Codes This System Serves

PFAS ("forever chemicals") have been reported in samples from water systems associated with the ZIP codes in this system's area. These results can come from other water systems serving the same ZIP codes; check the UCMR5 section for any results reported for this system. 5 detections recorded.

Health concern: Exposure to certain PFAS has been associated with some cancers and with immune and developmental effects; effects differ by compound. Many PFAS break down very slowly in the environment.
Recommended filter: An activated carbon filter certified under NSF/ANSI 53 or a reverse osmosis system certified under NSF/ANSI 58 for the PFAS listed in its certification. Find the right filter โ†’

Comparable Water Systems

Similar-sized systems in Iowa

0 violations
2 violations
1 violation
0 violations
1 violation

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

PFAS Treatment Water Filtration
PFAS Treatment $500
Water Filtration $300
Total Estimated Cost $800

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

Illustrative per-household cost scenario based on stated assumptions:

Estimated Healthcare Costs $500

Annual per household (ZipCheckup estimate)

PFAS Exposure - Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $800 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Individual costs vary by household size, property, and health factors. These estimates are for awareness, not financial advice.

System Overview

Milford Municipal Utilities (EPA ID: IA3050079) is a community water system in Iowa that serves approximately 3,431 people from surface water sources.

This system provides water to 5 ZIP codes across 5 communities.

Violation History

No current noncompliance in the accepted 2026Q2 snapshot. The 1 record in the 2021-2026 window are classified as resolved or archived, not current.

Status breakdown for accepted records with record years 2021-2026: 1 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
December 1, 2025 Surface Water Treatment Rule Health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Technique 1 Yes

Health Risk Details

E. coli (EPA limit: MCLG of zero; positive samples require repeat testing under the Revised Total Coliform Rule)

Some E. coli strains can cause severe GI illness and kidney failure, especially in children At-risk groups: children under 5, elderly, immunocompromised individuals, pregnant women.

Treatment options (verify a product is certified to reduce this contaminant): UV disinfection, chlorination, reverse osmosis. Find the right filter โ†’

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0.002 mg/L No 2023-12-31

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Radon Risk in Service Area

5 of 5 ZIP records with known zones are in EPA Radon Zone 1.

The EPA recommends testing all homes regardless of radon zone. County radon zones cannot replace an in-home radon test.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IA or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View available EPA compliance records for Milford Municipal Utilities (IA3050079) on EPA.gov.

Frequently Asked Questions

Is Milford Municipal Utilities water safe to drink?

The accepted 2026Q2 ECHO snapshot shows no current noncompliance for Milford Municipal Utilities; its 1 accepted 2021-2026 record are resolved or archived. Historical compliance status does not establish conditions at a specific tap.

How many people does Milford Municipal Utilities serve?

Milford Municipal Utilities serves approximately 3,431 people across 5 ZIP codes in Iowa.

Where does Milford Municipal Utilities get its water?

The primary water source is surface water.

Frequently Asked Questions

Should I use a water filter? ▼
Given 1 recorded violation, review the violation types and dates; a filter certified for a specific contaminant of concern can reduce that contaminant at the tap. Monitoring or reporting violations are not something a filter addresses.
How many people does Milford Municipal Utilities serve? ▼
Milford Municipal Utilities serves approximately 3,431 people with drinking water across 5 ZIP codes.
What is Milford Municipal Utilities's water source? ▼
Milford Municipal Utilities draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Milford Municipal Utilities's water? ▼
The most recent 90th-percentile lead result on record is 0.002 mg/L (sample period ending 2023-12-31). This is at or below the EPA lead action level, which triggers system action and is not a safe level; the EPA health goal for lead is zero.
What is the demographic profile of the ZIP codes associated with Milford Municipal Utilities? ▼
The ZIP codes mapped to Milford Municipal Utilities have a median household income of $67,628 (Census ZIP-code estimate). Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Milford Municipal Utilities get its water? ▼
Milford Municipal Utilities's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. The available violation history and environmental indicators place this system in the elevated review category; they do not measure current source contamination.

How to cite this page

APA ZipCheckup. (n.d.). Milford Municipal Utilities (IA): 1 Health Violation. https://zipcheckup.com/water-system/ia3050079/
BibTeX
@misc{zipcheckup-water-system-ia3050079,
  author = {{ZipCheckup}},
  title  = {{Milford Municipal Utilities (IA): 1 Health Violation}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/ia3050079/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

Milford Municipal Utilities (EPA ID: IA3050079) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home › Water Systems › Iowa › Milford Municipal Utilities

Get safety alerts for Milford Municipal Utilities, Iowa

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.