Monitoring Violations GA

Bellville

EPA ID: GA1090000 · 365 people served · 2 ZIP codes

Five-year compliance data for Bellville includes 1 violation the EPA has not yet marked resolved — those open findings are part of the utility's current enforcement profile, covering a service population of approximately 365 residents across the area it supplies.

Data: EPA SDWIS Last verified: 2026-04-02

A · 93
Avg Safety Score
365
People Served
2
ZIP Codes Served
1
Violations (5yr)
Groundwater
Water Source
0.0019 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
1
Contaminants Flagged

Service Area Map

Coverage area for Bellville Source: EPA SDWIS service area boundaries.

Service area boundary — Grade A

Service Area Demographics

$54,239
Median Household Income
11,224
Service Area Population
33%
Disadvantaged Population
80th
Poverty Percentile
80th
Energy Burden Percentile
59%
Pre-1986 Housing

The Bellville serves a community with a median household income of $54,239 and an estimated 11,224 residents across its service area. Approximately 59% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 33% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Bellville's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
0th
Superfund Site Proximity

About 1% of homes in Evans County, Georgia rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

57 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
15 yr
Est. Remaining Life
Stable
Decay Status
Installed 79% of expected lifespan used End of life

Detected Contaminants

How Bellville compares to EPA limits

What This Means For You

Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Georgia

0 violations
0 violations
Camak
366 people
C 14 violations
0 violations
Norwood
370 people
A 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance
Flood Insurance $1,500
Total Estimated Cost $1,500

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $1,500 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Bellville (EPA ID: GA1090000) is a community water system in Georgia that serves approximately 365 people from groundwater sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: A (93/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 monitoring/reporting violation recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 2, 2025 Stage 2 DBP Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 2 DBP Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
30414 0.0019 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 1 ZIP code confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Bellville (GA1090000) on EPA.gov.

Frequently Asked Questions

Is Bellville water safe to drink?

Bellville has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Bellville serve?

Bellville serves approximately 365 people across 2 ZIP codes in Georgia.

Where does Bellville get its water?

The primary water source is groundwater.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
5
Galvanized — Replacement Required
0
Unknown Material
158
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 365
Reported to Georgia

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Bellville safe to drink?
Bellville earns a A safety grade with 1 violation in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Bellville's water?
Detected contaminants include Stage 2 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Bellville serve?
Bellville serves approximately 365 people with drinking water across 2 ZIP codes.
What is Bellville's water source?
Bellville draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Bellville's water?
The maximum detected lead level is 0.0019 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Bellville's service area?
The Bellville service area has a median household income of $54,239. EPA EJScreen data classifies 33% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Bellville get its water?
Bellville's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Bellville (EPA ID: GA1090000) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Georgia Bellville

Get safety alerts for Bellville, Georgia

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.