Monitoring Violations GA

Albany

EPA ID: GA0950000 · 101,245 people served · 11 ZIP codes

Looking at the EPA enforcement file for Albany, 2 violations appear in the five-year dataset, but none remain open — the utility has addressed each finding and is in current compliance, with no pending enforcement affecting the 101,245 people in its service area.

Data: EPA SDWIS Last verified: 2026-04-02

A · 88
Avg Safety Score
101,245
People Served
11
ZIP Codes Served
2
Violations (5yr)
Groundwater
Water Source
0.0022 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
1
Contaminants Flagged

Service Area Map

Coverage area for Albany Source: EPA SDWIS service area boundaries.

Service area boundary — Grade A

Service Area Demographics

$49,179
Median Household Income
119,037
Service Area Population
71%
Disadvantaged Population
67th
Poverty Percentile
78th
Energy Burden Percentile
57%
Pre-1986 Housing

The Albany serves a community with a median household income of $49,179 and an estimated 119,037 residents across its service area. Approximately 57% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 71% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Albany's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
19th
Wastewater Discharge Proximity
79th
Superfund Site Proximity

About 2% of homes in Dougherty County, Georgia rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 79th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.

Infrastructure Risk

47 yr
Avg Pipe Age
Unknown
Pipe Material
20 yr
Est. Remaining Life
Stable
Decay Status
Installed 70% of expected lifespan used End of life

Detected Contaminants

How Albany compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 8 detections recorded.

State limits: PFOA: 0.004 ppt, PFOS: 0.004 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Georgia

Dalton Utilities
99,315 people
B 1 violation
A 0 violations
C 11 violations
B 0 violations
C 15 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment Water Filtration
Flood Insurance $1,533
PFAS Treatment $222
Water Filtration $33
Total Estimated Cost $1,789

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $1,789 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Albany (EPA ID: GA0950000) is a community water system in Georgia that serves approximately 101,245 people from groundwater sources.

This system provides water to 11 ZIP codes across 3 communities.

Average Home Safety Score: A (88/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Surface Water Treatment Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 2 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
31701 0.0022 mg/L No N/A
31702 0.0022 mg/L No N/A
31703 0.0022 mg/L No N/A
31704 0.0022 mg/L No N/A
31705 0.0022 mg/L No N/A
31706 0.0022 mg/L No N/A
31707 0.0022 mg/L No N/A
31708 0.0022 mg/L No N/A
31721 0.0022 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 5 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 6 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Albany (GA0950000) on EPA.gov.

Frequently Asked Questions

Is Albany water safe to drink?

Albany has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Albany serve?

Albany serves approximately 101,245 people across 11 ZIP codes in Georgia.

Where does Albany get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
229.302.1675
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from Albany Utilities Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorinefluoride

Source: Albany Utilities Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from Albany Utilities Consumer Confidence Report:
A Source Water Assessment has been performed for our area to provide baseline data about the quality of water before it is treated and distributed to our customers. This is important because it identifies the origins of contaminants within our area and indicates the susceptibility of our water to such contaminants.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine
Fluoridation
Added at low levels per state or local public-health policy for dental health.
fluoride

Treatment classification and chemical list sourced from Albany Utilities Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
348
Detections
4
Latest sample
7/16/2025
Highest analyte
PFBS: 6.4 ppt
Analyte Max detected Current MCL Status
PFBS 6.4 ppt
PFOS 4 ppt 10 ppt Below current MCL

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
591
Galvanized — Replacement Required
0
Unknown Material
36,608
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 101,245
Reported to Georgia

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Albany safe to drink?
Albany earns a A safety grade with 2 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Albany's water?
Detected contaminants include Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Albany serve?
Albany serves approximately 101,245 people with drinking water across 11 ZIP codes.
What is Albany's water source?
Albany draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Albany's water?
The maximum detected lead level is 0.0022 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Albany's service area?
The Albany service area has a median household income of $49,179. EPA EJScreen data classifies 71% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Albany get its water?
Albany's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Albany (EPA ID: GA0950000) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Georgia Albany

Get safety alerts for Albany, Georgia

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.