Monitoring Violations CA

Sweetwater Springs Cwd - Monte Rio

EPA ID: CA4910028 · 3,000 people served · 6 ZIP codes

Despite the 3 historical violations in its record, Sweetwater Springs Cwd - Monte Rio has cleared every one and now meets EPA standards serving 3,000 residents.

Data: EPA SDWIS Last verified: 2026-04-02

B · 84
Avg Safety Score
3,000
People Served
6
ZIP Codes Served
3
Violations (5yr)
Groundwater
Water Source
0.004 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
1
Contaminants Flagged
$714K
Median Home Value in Service Area

Service Area Map

Coverage area for Sweetwater Springs Cwd - Monte Rio Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$88,643
Median Household Income
37,125
Service Area Population
8%
Disadvantaged Population
30th
Poverty Percentile
20th
Energy Burden Percentile
76%
Pre-1986 Housing

The Sweetwater Springs Cwd - Monte Rio serves a community with a median household income of $88,643 and an estimated 37,125 residents across its service area. Approximately 76% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Sweetwater Springs Cwd - Monte Rio's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Low Risk
Source Contamination Risk
20th
Wastewater Discharge Proximity
20th
Superfund Site Proximity

About 1% of homes in Sonoma County, California rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

56 yr
Avg Pipe Age
Copper
Pipe Material
15 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 79% of expected lifespan used End of life

Detected Contaminants

How Sweetwater Springs Cwd - Monte Rio compares to EPA limits

What This Means For You

Consumer Confidence Report Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in California

Green Valley Mwc
2,993 people
0 violations
Cci - Tehachapi
2,993 people
0 violations
Aromas Water District
2,988 people
B 0 violations
0 violations
C 3 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Water Filtration
Flood Insurance $1,200
Water Filtration $50
Total Estimated Cost $1,250

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $1,250 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Sweetwater Springs Cwd - Monte Rio (EPA ID: CA4910028) is a community water system in California that serves approximately 3,000 people from groundwater sources.

This system provides water to 6 ZIP codes across 6 communities.

Average Home Safety Score: B (84/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

3 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Consumer Confidence Report Rule Reporting Failure 3 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
95430 0.004 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by CA or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Sweetwater Springs Cwd - Monte Rio (CA4910028) on EPA.gov.

Frequently Asked Questions

Is Sweetwater Springs Cwd - Monte Rio water safe to drink?

Sweetwater Springs Cwd - Monte Rio has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Sweetwater Springs Cwd - Monte Rio serve?

Sweetwater Springs Cwd - Monte Rio serves approximately 3,000 people across 6 ZIP codes in California.

Where does Sweetwater Springs Cwd - Monte Rio get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(707) 869-4000
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
17081 Hwy. 116, Ste. B, P.O. Box 48, Guerneville, CA 95446

Contact information from Sweetwater Springs Water District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: Sweetwater Springs Water District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from Sweetwater Springs Water District Consumer Confidence Report:
A source water assessment was completed for both wells in April 2005. These sources are considered most vulnerable to high density septic systems not associated with any detected contaminants.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

Septic systemsLivestock operationsUrban stormwater runoffIndustrial dischargesFarming

Treatment classification and chemical list sourced from Sweetwater Springs Water District Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
1,106
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 3,000
Reported to California

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

Fluoride
0.19 ppm
Utility does not add fluoride
Measured fluoride concentration in parts per million.
EPA secondary MCL: 2.0 ppm
Total dissolved solids
200 ppm
Mineral content remaining after evaporation, including calcium, magnesium, sodium, and other dissolved substances.
EPA secondary MCL: 500 ppm

Aesthetic measurements from Sweetwater Springs Water District Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

Hard water detected in Sweetwater Springs Water District

Your utility reported water hardness of 150 ppm CaCO₃ (8.8 grains per gallon) in its most recent Consumer Confidence Report. This is in the moderately hard range and may cause scale buildup, reduced appliance lifespan, and dry skin or hair.

Solutions for hard water

There are three common approaches to treating hard water: salt-based ion-exchange softeners (most effective, require salt refills), salt-free conditioners (lower maintenance, scale prevention only), and reverse osmosis at the kitchen sink (cooking and drinking water only). Aquasana, EcoWater, Pelican, and SpringWell are among the major US brands.

Recommended Aquasana system for your hardness level

Paid Partner. ZipCheckup earns commission on Aquasana purchases. We do not test water or verify product effectiveness for specific hardness levels — manufacturer claims are theirs alone. Consult a certified water-quality professional for personalized advice.

Hardness data parsed from this utility's most recent Consumer Confidence Report. Severity bands per USGS hard water classification.

Frequently Asked Questions

Is water from Sweetwater Springs Cwd - Monte Rio safe to drink?
Sweetwater Springs Cwd - Monte Rio earns a B safety grade with 3 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Sweetwater Springs Cwd - Monte Rio's water?
Detected contaminants include Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Sweetwater Springs Cwd - Monte Rio serve?
Sweetwater Springs Cwd - Monte Rio serves approximately 3,000 people with drinking water across 6 ZIP codes.
What is Sweetwater Springs Cwd - Monte Rio's water source?
Sweetwater Springs Cwd - Monte Rio draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Sweetwater Springs Cwd - Monte Rio's water?
The maximum detected lead level is 0.004 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Sweetwater Springs Cwd - Monte Rio's service area?
The Sweetwater Springs Cwd - Monte Rio service area has a median household income of $88,643. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Sweetwater Springs Cwd - Monte Rio get its water?
Sweetwater Springs Cwd - Monte Rio's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Sweetwater Springs Cwd - Monte Rio (EPA ID: CA4910028) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems California Sweetwater Springs Cwd - Monte Rio

Get safety alerts for Sweetwater Springs Cwd - Monte Rio, California

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.