Water System Report CA

City of Daly City

EPA ID: CA4110013 · 104,901 people served · 8 ZIP codes

Zero violations in five consecutive years of EPA monitoring — City of Daly City has held a clean track record across every reporting cycle in that span, with no enforcement activity of any kind on file for the full service population of 104,901 residents.

Data: EPA SDWIS Last verified: 2026-04-02

B · 75
Avg Safety Score
104,901
People Served
8
ZIP Codes Served
0
Violations (5yr)
Surface Water
Water Source
0.0071 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
0
Contaminants Flagged
$1.2M
Median Home Value in Service Area

Compliance Trajectory

Stable · Risk tier: High · 80% chance of violation in next 12 months

Violations went from 2 (2021) to 4 (2024). Violation counts have remained relatively steady.

Service Area Map

Coverage area for City of Daly City Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$127,229
Median Household Income
333,241
Service Area Population
20%
Disadvantaged Population
23th
Poverty Percentile
8th
Energy Burden Percentile
84%
Pre-1986 Housing

The City of Daly City serves a community with a median household income of $127,229 and an estimated 333,241 residents across its service area. Approximately 84% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

City of Daly City's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
30th
Wastewater Discharge Proximity
63th
Superfund Site Proximity

About 1% of homes in San Mateo County, California rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 63th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

74 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
2 yr
Est. Remaining Life
Accelerating Decay
Decay Status
Installed 97% of expected lifespan used End of life

Comparable Water Systems

Similar-sized systems in California

B 0 violations
C 3 violations
Cal-am Water Coronado
106,000 people
B 13 violations
C 0 violations
C 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation Water Filtration
Flood Insurance $825
Radon Mitigation $350
Water Filtration $150
Total Estimated Cost $1,325

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

System Overview

City of Daly City (EPA ID: CA4110013) is a community water system in California that serves approximately 104,901 people from surface water sources.

This system provides water to 8 ZIP codes across 4 communities.

Average Home Safety Score: B (75/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
94014 0.0071 mg/L No N/A
94015 0.0071 mg/L No N/A
94016 0.0071 mg/L No N/A
94017 0.0071 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 6 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 2 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Daly City (CA4110013) on EPA.gov.

Frequently Asked Questions

Is City of Daly City water safe to drink?

Based on EPA records, City of Daly City has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does City of Daly City serve?

City of Daly City serves approximately 104,901 people across 8 ZIP codes in California.

Where does City of Daly City get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(650) 991-8200
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
153 Lake Merced Boulevard Daly City, CA 94015

Contact information from Daly City Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Blended (groundwater + surface water)
Combines water from both groundwater and surface sources.
Treatment chemicals reported
disinfectant chemicalsfluoride

Source: Daly City Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from Daly City Consumer Confidence Report:
In March 2003, a drinking water source assessment was completed. The assessment showed that five of Daly City's six municipal production wells assessed as being highly protected from potential pathways of contamination. Well #4's assessment showed it as being moderately protected. With the activation of the new Sullivan well in 2015, Well #4 has been designated as an emergency standby well.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Multi-stage
Multiple treatment stages — typically coagulation, filtration, and disinfection. Common for surface-water systems requiring removal of particulates, microorganisms, and dissolved organic compounds before disinfection.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Fluoridation
Added at low levels per state or local public-health policy for dental health.
fluoride
Other reported chemicals
Reported by the utility but not in our annotation dictionary.
disinfectant chemicals

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

Automotive repair activitiesRoadway contaminantsRailwaysSewage treatment plantsSeptic systemsLivestock operationsWildlifeUrban stormwater runoffWastewater dischargesOil and gas productionMiningFarmingAgricultural applicationResidential uses

Treatment classification and chemical list sourced from Daly City Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
505

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead service line replacement plan from Daly City Consumer Confidence Report:
There are no known lead service lines in the Daly City water distribution system. The City of Daly City will again be participating in the triennial Lead and Copper Monitoring effort in 2025.

Lead Service Line Replacement Tracker

This water utility's lead service line (LSL) replacement program is tracked from public Consumer Confidence Report filings. Email signup notifies subscribers when the utility files an updated replacement plan or progress milestone.

Get notified on replacement progress

Subscribers receive an email when this utility updates its LSL plan, files a milestone report, or adjusts replacement timelines. No marketing, no third-party sharing.

By submitting you agree to Privacy Policy. Unsubscribe anytime via the link in any email.

Daly City

ZipCheckup is not affiliated with this water utility. LSL replacement-program data is sourced from public CCR filings published by the utility. Subscription notifications are based on automated parsing of subsequent CCR releases.

Learn more about Lead and Copper Rule replacement requirements →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
21,770
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 104,901
Reported to California

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

pH
9.2
How acidic or basic the water is on a 0-14 scale. Drinking water is typically near neutral.
EPA secondary range: 6.5 – 8.5
Fluoride
0.6 ppm
Utility adds fluoride
Measured fluoride concentration in parts per million.
EPA secondary MCL: 2.0 ppm
Alkalinity
46 ppm CaCO₃
Capacity of the water to neutralize acids, expressed as calcium carbonate equivalent.
Total dissolved solids
84 ppm
Mineral content remaining after evaporation, including calcium, magnesium, sodium, and other dissolved substances.
EPA secondary MCL: 500 ppm

Aesthetic measurements from Daly City Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

Frequently Asked Questions

Is water from City of Daly City safe to drink?
City of Daly City earns a B safety grade with 0 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
Should I use a water filter?
City of Daly City meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does City of Daly City serve?
City of Daly City serves approximately 104,901 people with drinking water across 8 ZIP codes.
What is City of Daly City's water source?
City of Daly City draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Daly City's water?
The maximum detected lead level is 0.0071 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Daly City's service area?
The City of Daly City service area has a median household income of $127,229. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does City of Daly City get its water?
City of Daly City's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.
Home Water Systems California City of Daly City

Get safety alerts for City of Daly City, California

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.