Water System Report CA

San Miguel Community Services District

EPA ID: CA4010010 · 2,600 people served · 3 ZIP codes

Five years of EPA monitoring have produced no violations for San Miguel Community Services District — the supplier serving 2,600 residents has kept every contaminant level within federal limits, a result that places it among the top-performing utilities for systems with a service population of comparable size.

Data: EPA SDWIS Last verified: 2026-04-02

B · 72
Avg Safety Score
2,600
People Served
3
ZIP Codes Served
0
Violations (5yr)
Groundwater
Water Source
Zone 2
Radon Risk · Moderate
0
Contaminants Flagged
$661K
Median Home Value in Service Area

Compliance Trajectory

Stable · Risk tier: High · 94% chance of violation in next 12 months

Violations went from 1 (2021) to 3 (2024). Violation counts have remained relatively steady.

Service Area Map

Coverage area for San Miguel Community Services District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$94,512
Median Household Income
61,114
Service Area Population
17%
Disadvantaged Population
37th
Poverty Percentile
23th
Energy Burden Percentile
37%
Pre-1986 Housing

The San Miguel Community Services District serves a community with a median household income of $94,512 and an estimated 61,114 residents across its service area.

💧 Where Does Your Water Come From?

Groundwater

San Miguel Community Services District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
40th
Superfund Site Proximity

About 1% of homes in San Luis Obispo County, California rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

36 yr
Avg Pipe Age
Copper
Pipe Material
34 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 51% of expected lifespan used End of life

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 9 detections recorded. 1 exceeds federal EPA limits (4 ppt for PFOA/PFOS). 1 exceeds state limits.

State limits: PFOA: 0.0051 ppt, PFOS: 0.0065 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in California

B 2 violations
Fulton Water Company
2,593 people
B 4 violations
Frazier Park Pud
2,592 people
B 3 violations
C 5 violations
Bertsch Ocean View Csd
2,570 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,000
Radon Mitigation $400
PFAS Treatment $367
Water Filtration $200
Total Estimated Cost $1,967

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$165
10 years
$330
20 years
$660

Compare: Estimated remediation cost is $1,967 (one-time) vs. $330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

San Miguel Community Services District (EPA ID: CA4010010) is a community water system in California that serves approximately 2,600 people from groundwater sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: B (72/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

No Lead and Copper Rule sampling data available for this water system.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by CA or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for San Miguel Community Services District (CA4010010) on EPA.gov.

Frequently Asked Questions

Is San Miguel Community Services District water safe to drink?

Based on EPA records, San Miguel Community Services District has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does San Miguel Community Services District serve?

San Miguel Community Services District serves approximately 2,600 people across 3 ZIP codes in California.

Where does San Miguel Community Services District get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(805) 467-3388
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
PO Box 180, San Miguel, CA 9351

Contact information from San Miguel Community Services District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: San Miguel Community Services District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from San Miguel Community Services District Consumer Confidence Report:
The source assessment concluded that the wells continue to be most vulnerable to the following activities: sewer collection system. A copy of the complete assessment is available from Santa Barbara District California Department of Public Health or San Miguel CSD office.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

Sewer collection system

Treatment classification and chemical list sourced from San Miguel Community Services District Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
911
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 2,600
Reported to California

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

pH
7.76
How acidic or basic the water is on a 0-14 scale. Drinking water is typically near neutral.
EPA secondary range: 6.5 – 8.5
Fluoride
0.41 ppm
Measured fluoride concentration in parts per million.
EPA secondary MCL: 2.0 ppm
Alkalinity
240 ppm CaCO₃
Capacity of the water to neutralize acids, expressed as calcium carbonate equivalent.
Total dissolved solids
615 ppm
Mineral content remaining after evaporation, including calcium, magnesium, sodium, and other dissolved substances.
EPA secondary MCL: 500 ppm

Aesthetic measurements from San Miguel Community Services District Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

Hard water detected in San Miguel Community Services District

Your utility reported water hardness of 325 ppm CaCO₃ (19 grains per gallon) in its most recent Consumer Confidence Report. This is in the very hard range and may cause scale buildup, reduced appliance lifespan, and dry skin or hair.

Solutions for hard water

There are three common approaches to treating hard water: salt-based ion-exchange softeners (most effective, require salt refills), salt-free conditioners (lower maintenance, scale prevention only), and reverse osmosis at the kitchen sink (cooking and drinking water only). Aquasana, EcoWater, Pelican, and SpringWell are among the major US brands.

Recommended Aquasana system for your hardness level

Paid Partner. ZipCheckup earns commission on Aquasana purchases. We do not test water or verify product effectiveness for specific hardness levels — manufacturer claims are theirs alone. Consult a certified water-quality professional for personalized advice.

Hardness data parsed from this utility's most recent Consumer Confidence Report. Severity bands per USGS hard water classification.

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • MCL · Gross Alpha Particle Activity
    2011
    Gross Alpha Particle Activity exceeded MCL of 15 pCi/L with a level of 15.75 pCi/L

Violations record from San Miguel Community Services District Consumer Confidence Report.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from San Miguel Community Services District safe to drink?
San Miguel Community Services District earns a B safety grade with 0 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
Should I use a water filter?
San Miguel Community Services District meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does San Miguel Community Services District serve?
San Miguel Community Services District serves approximately 2,600 people with drinking water across 3 ZIP codes.
What is San Miguel Community Services District's water source?
San Miguel Community Services District draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of San Miguel Community Services District's service area?
The San Miguel Community Services District service area has a median household income of $94,512. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does San Miguel Community Services District get its water?
San Miguel Community Services District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.
Home Water Systems California San Miguel Community Services District

Get safety alerts for San Miguel Community Services District, California

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.