Water System Report CA

East Valley Water District

EPA ID: CA3610064 · 108,629 people served · 6 ZIP codes

Federal monitoring records confirm East Valley Water District has operated without any EPA violations for the full five-year window — covering every contaminant category and reporting cycle across a service area of approximately 108,629 residents, with no gaps in the compliance record.

Data: EPA SDWIS Last verified: 2026-04-02

C · 66
Avg Safety Score
108,629
People Served
6
ZIP Codes Served
0
Violations (5yr)
Surface Water
Water Source
0.0028 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
0
Contaminants Flagged
$407K
Median Home Value in Service Area

Service Area Map

Coverage area for East Valley Water District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$63,696
Median Household Income
186,322
Service Area Population
51%
Disadvantaged Population
50th
Poverty Percentile
40th
Energy Burden Percentile
70%
Pre-1986 Housing

The East Valley Water District serves a community with a median household income of $63,696 and an estimated 186,322 residents across its service area. Approximately 70% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 51% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

East Valley Water District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
20th
Wastewater Discharge Proximity
60th
Superfund Site Proximity

About 1% of homes in San Bernardino County, California rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 60th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

50 yr
Avg Pipe Age
Copper
Pipe Material
19 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 72% of expected lifespan used End of life

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 35 detections recorded. 10 exceed federal EPA limits (4 ppt for PFOA/PFOS). 8 exceed state limits.

State limits: PFOA: 0.0051 ppt, PFOS: 0.0065 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in California

B 1 violation
C 5 violations
0 violations
Mesa Water District
110,000 people
C 28 violations
Azusa Light and Water
110,044 people
B 3 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment Radon Mitigation Water Filtration
Flood Insurance $1,000
PFAS Treatment $500
Radon Mitigation $333
Water Filtration $50
Total Estimated Cost $1,883

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$165
10 years
$330
20 years
$660

Compare: Estimated remediation cost is $1,883 (one-time) vs. $330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

East Valley Water District (EPA ID: CA3610064) is a community water system in California that serves approximately 108,629 people from surface water sources.

This system provides water to 6 ZIP codes across 4 communities.

Average Home Safety Score: C (66/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
92346 0.0028 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by CA or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for East Valley Water District (CA3610064) on EPA.gov.

Frequently Asked Questions

Is East Valley Water District water safe to drink?

Based on EPA records, East Valley Water District has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does East Valley Water District serve?

East Valley Water District serves approximately 108,629 people across 6 ZIP codes in California.

Where does East Valley Water District get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(909) 889-9501
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
31111 Greenspot Road, Highland, CA 92346

Contact information from East Valley Water District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Blended (groundwater + surface water)
Combines water from both groundwater and surface sources.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorineorthophosphate

Source: East Valley Water District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from East Valley Water District Consumer Confidence Report:
East Valley Water District completed Source Water Assessments in March 2002 on all of the active groundwater wells. Assessments are conducted periodically with the next one currently being updated.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine
Corrosion inhibitor
Coats pipe interiors to reduce lead and copper leaching from premise plumbing.
orthophosphate

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

Airport Maintenance and Aircraft FuelingAgricultural DrainageArtificial Recharge Projects - Spreading BasinsAutomobile Body Shops, Car Washes, Gas Stations, Repair ShopsBoat Repair Services and RefinishingChemical, Petroleum Processing, and StorageContractor or Government Agency Equipment Storage YardsDry cleanersFertilizer, Pesticide, Herbicide ApplicationFleet, Truck, Bus TerminalsFuneral Services, CemeteriesGolf CoursesHistoric Gas StationsHigh Density HousingScrap and Salvage YardsKnown Contaminant PlumesLumber Processing and ManufacturingMachine ShopsMetal Plating, Finishing and FabricatingMilitary InstallationsMall Parking LotsParks and SchoolsSeptic Systems Within High and Low DensitySewer collection systemsSurface Water, Streams, Lakes, and RiversTransportation Corridors, Roads and Right-of-WaysUnderground storage tanksUtility Station Maintenance AreasRecycling StationsWater Supply, Agricultural, Irrigation, and Abandoned Wells

Treatment classification and chemical list sourced from East Valley Water District Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Above Current MCL

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). One or more PFAS compounds were measured above the current state-enforceable MCL.

Samples collected
812
Detections
16
Latest sample
4/9/2025
Highest analyte
PFOS: 12 ppt
Analyte Max detected Current MCL Status
PFOS 12 ppt 10 ppt Above current MCL
PFOA 9 ppt 10 ppt Above 2029 federal MCL
PFBS 8.9 ppt
PFPeA 4.7 ppt
PFHxA 4.7 ppt
PFHxS 4 ppt 10 ppt Below current MCL

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

PFAS Substances Detected in This System

This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.

Substance Detected level EPA limit Status
PFBS
Perfluorobutanesulfonic acid
EPA-regulated (2024 NPDWR)
Component of EPA Hazard Index — combined exposure assessed against unitless threshold of 1.0.
0.67 ppt No federal limit set
PFHxS
Perfluorohexanesulfonic acid
EPA-regulated (2024 NPDWR)
0.33 ppt 10 ppt Below EPA limit
PFOS
Perfluorooctanesulfonic acid
EPA-regulated (2024 NPDWR)
0.83 ppt 4 ppt Below EPA limit
PFOA
Perfluorooctanoic acid
EPA-regulated (2024 NPDWR)
0.65 ppt 4 ppt Below EPA limit

In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →

Source: Consumer Confidence Report disclosed by East Valley Water District.

ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.

Learn more about PFAS health effects and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
22,300
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 108,629
Reported to California

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

pH
7.2
How acidic or basic the water is on a 0-14 scale. Drinking water is typically near neutral.
EPA secondary range: 6.5 – 8.5
Fluoride
0.21 ppm
Utility does not add fluoride
Measured fluoride concentration in parts per million.
EPA secondary MCL: 2.0 ppm
Alkalinity
106 ppm CaCO₃
Capacity of the water to neutralize acids, expressed as calcium carbonate equivalent.
Total dissolved solids
523 ppm
Mineral content remaining after evaporation, including calcium, magnesium, sodium, and other dissolved substances.
EPA secondary MCL: 500 ppm

Aesthetic measurements from East Valley Water District Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

Hard water detected in East Valley Water District

Your utility reported water hardness of 130 ppm CaCO₃ (7.6 grains per gallon) in its most recent Consumer Confidence Report. This is in the moderately hard range and may cause scale buildup, reduced appliance lifespan, and dry skin or hair.

Solutions for hard water

There are three common approaches to treating hard water: salt-based ion-exchange softeners (most effective, require salt refills), salt-free conditioners (lower maintenance, scale prevention only), and reverse osmosis at the kitchen sink (cooking and drinking water only). Aquasana, EcoWater, Pelican, and SpringWell are among the major US brands.

Recommended Aquasana system for your hardness level

Paid Partner. ZipCheckup earns commission on Aquasana purchases. We do not test water or verify product effectiveness for specific hardness levels — manufacturer claims are theirs alone. Consult a certified water-quality professional for personalized advice.

Hardness data parsed from this utility's most recent Consumer Confidence Report. Severity bands per USGS hard water classification.

Frequently Asked Questions

Is water from East Valley Water District safe to drink?
East Valley Water District has a C safety grade based on 0 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
Should I use a water filter?
East Valley Water District meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does East Valley Water District serve?
East Valley Water District serves approximately 108,629 people with drinking water across 6 ZIP codes.
What is East Valley Water District's water source?
East Valley Water District draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in East Valley Water District's water?
The maximum detected lead level is 0.0028 mg/L. This is within EPA action level guidelines.
What is the demographic profile of East Valley Water District's service area?
The East Valley Water District service area has a median household income of $63,696. EPA EJScreen data classifies 51% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does East Valley Water District get its water?
East Valley Water District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

East Valley Water District (EPA ID: CA3610064) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems California East Valley Water District

Get safety alerts for East Valley Water District, California

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.