Water System Report CA

City of Chino Hills

EPA ID: CA3610036 · 76,414 people served · 3 ZIP codes

From the earliest to the most recent cycle in the five-year EPA window, City of Chino Hills has logged zero violations — no MCL exceedances, no health advisories, and no enforcement activity across the entire period for the 76,414 people in its service area, a record that stands up well against both state and national benchmarks.

Data: EPA SDWIS Last verified: 2026-04-02

B · 83
Avg Safety Score
76,414
People Served
3
ZIP Codes Served
0
Violations (5yr)
Surface Water
Water Source
0.0019 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
0
Contaminants Flagged
$645K
Median Home Value in Service Area

Service Area Map

Coverage area for City of Chino Hills Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$104,242
Median Household Income
175,694
Service Area Population
51%
Disadvantaged Population
50th
Poverty Percentile
40th
Energy Burden Percentile
35%
Pre-1986 Housing

The City of Chino Hills serves a community with a median household income of $104,242 and an estimated 175,694 residents across its service area.

Environmental Justice Note: 51% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

City of Chino Hills's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
20th
Wastewater Discharge Proximity
60th
Superfund Site Proximity

About 1% of homes in San Bernardino County, California rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 60th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

36 yr
Avg Pipe Age
Copper
Pipe Material
32 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 53% of expected lifespan used End of life

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 13 detections recorded. 4 exceed federal EPA limits (4 ppt for PFOA/PFOS). 4 exceed state limits.

State limits: PFOA: 0.0051 ppt, PFOS: 0.0065 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in California

B 0 violations
City of Pleasanton
76,689 people
B 2 violations
B 0 violations
Desert Water Agency
74,807 people
C 4 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $800
Radon Mitigation $400
PFAS Treatment $400
Water Filtration $200
Total Estimated Cost $1,800

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$165
10 years
$330
20 years
$660

Compare: Estimated remediation cost is $1,800 (one-time) vs. $330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

City of Chino Hills, (EPA ID: CA3610036) is a community water system in California that serves approximately 76,414 people from surface water sources.

This system provides water to 3 ZIP codes across 2 communities.

Average Home Safety Score: B (83/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
91709 0.0019 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by CA or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Chino Hills (CA3610036) on EPA.gov.

Frequently Asked Questions

Is City of Chino Hills water safe to drink?

Based on EPA records, City of Chino Hills has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does City of Chino Hills serve?

City of Chino Hills serves approximately 76,414 people across 3 ZIP codes in California.

Where does City of Chino Hills get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(909) 364-2800
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from City of Chino Hills Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Blended (groundwater + surface water)
Combines water from both groundwater and surface sources.

Source: City of Chino Hills Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from City of Chino Hills Consumer Confidence Report:
The State Water Resources Control Board (SWRCB) conducted a source water assessment of all operable City water wells in May 2002. The assessment was designed to make the public and the City aware of contaminants detected in the City’s groundwater supply. In addition, the assessment highlights possible sources of these and future contaminants.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Multi-stage
Multiple treatment stages — typically coagulation, filtration, and disinfection. Common for surface-water systems requiring removal of particulates, microorganisms, and dissolved organic compounds before disinfection.

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

Known contaminant plumesAgricultural drainageFurniture repair/manufacturingElectrical/electronic manufacturingSewer collection systemsAppliance/electronic repairChemical/petroleum processing/storageMetal plating/finishing/fabricatingFleet/truck/bus terminalsRailroad yards/maintenance/fueling areasAirport maintenance/fueling areas

Treatment classification and chemical list sourced from City of Chino Hills Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
174

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Replacement Tracker

This water utility's lead service line (LSL) replacement program is tracked from public Consumer Confidence Report filings. Email signup notifies subscribers when the utility files an updated replacement plan or progress milestone.

Get notified on replacement progress

Subscribers receive an email when this utility updates its LSL plan, files a milestone report, or adjusts replacement timelines. No marketing, no third-party sharing.

By submitting you agree to Privacy Policy. Unsubscribe anytime via the link in any email.

City of Chino Hills

ZipCheckup is not affiliated with this water utility. LSL replacement-program data is sourced from public CCR filings published by the utility. Subscription notifications are based on automated parsing of subsequent CCR releases.

Learn more about Lead and Copper Rule replacement requirements →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
21,648
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 76,414
Reported to California

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

pH
7.8
How acidic or basic the water is on a 0-14 scale. Drinking water is typically near neutral.
EPA secondary range: 6.5 – 8.5
Fluoride
0.6 ppm
Measured fluoride concentration in parts per million.
EPA secondary MCL: 2.0 ppm
Alkalinity
120 ppm CaCO₃
Capacity of the water to neutralize acids, expressed as calcium carbonate equivalent.
Total dissolved solids
320 ppm
Mineral content remaining after evaporation, including calcium, magnesium, sodium, and other dissolved substances.
EPA secondary MCL: 500 ppm

Aesthetic measurements from City of Chino Hills Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

Hard water detected in City of Chino Hills

Your utility reported water hardness of 180 ppm CaCO₃ (10.5 grains per gallon) in its most recent Consumer Confidence Report. This is in the moderately hard range and may cause scale buildup, reduced appliance lifespan, and dry skin or hair.

Solutions for hard water

There are three common approaches to treating hard water: salt-based ion-exchange softeners (most effective, require salt refills), salt-free conditioners (lower maintenance, scale prevention only), and reverse osmosis at the kitchen sink (cooking and drinking water only). Aquasana, EcoWater, Pelican, and SpringWell are among the major US brands.

Recommended Aquasana system for your hardness level

Paid Partner. ZipCheckup earns commission on Aquasana purchases. We do not test water or verify product effectiveness for specific hardness levels — manufacturer claims are theirs alone. Consult a certified water-quality professional for personalized advice.

Hardness data parsed from this utility's most recent Consumer Confidence Report. Severity bands per USGS hard water classification.

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Notable events from the utility's CCR

These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.

Notable events from City of Chino Hills Consumer Confidence Report:
  • All but one City-owned well have been inactivated due to groundwater contamination
  • Construction began in January 2023 on a new water treatment facility located on Eucalyptus Avenue near Pipeline Avenue
  • The facility is approximately 95% complete and is expected to be operational in the fall 2025

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from City of Chino Hills safe to drink?
City of Chino Hills earns a B safety grade with 0 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
Should I use a water filter?
City of Chino Hills meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does City of Chino Hills serve?
City of Chino Hills serves approximately 76,414 people with drinking water across 3 ZIP codes.
What is City of Chino Hills's water source?
City of Chino Hills draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Chino Hills's water?
The maximum detected lead level is 0.0019 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Chino Hills's service area?
The City of Chino Hills service area has a median household income of $104,242. EPA EJScreen data classifies 51% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does City of Chino Hills get its water?
City of Chino Hills's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.
Home Water Systems California City of Chino Hills

Get safety alerts for City of Chino Hills, California

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.