Health Violations Found AL 2 HEALTH VIOLATIONS

Jasper Water Works and Sewer Board

EPA ID: AL0001336 · 28,638 people served · 7 ZIP codes

Jasper Water Works and Sewer Board carries 10 resolved violations in the five-year EPA record — each has been formally closed, and the supplier, which serves approximately 28,638 people, now meets all applicable federal drinking water standards with no open enforcement activity remaining.

Data: EPA SDWIS Last verified: 2026-04-02

B · 81
Avg Safety Score
28,638
People Served
7
ZIP Codes Served
10
Violations (5yr)
Surface Water
Water Source
0.005 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
5
Contaminants Flagged
$130K
Median Home Value in Service Area

Service Area Map

Coverage area for Jasper Water Works and Sewer Board Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$51,534
Median Household Income
45,038
Service Area Population
89%
Disadvantaged Population
70th
Poverty Percentile
80th
Energy Burden Percentile
57%
Pre-1986 Housing

The Jasper Water Works and Sewer Board serves a community with a median household income of $51,534 and an estimated 45,038 residents across its service area. Approximately 57% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 89% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Jasper Water Works and Sewer Board's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
70th
Wastewater Discharge Proximity
20th
Superfund Site Proximity

About 2% of homes in Walker County, Alabama rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Wastewater Proximity Note: This service area ranks in the 70th percentile nationally for proximity to wastewater discharge points. Surface water sources near wastewater outfalls may face additional treatment challenges.

Infrastructure Risk

48 yr
Avg Pipe Age
Copper
Pipe Material
22 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 69% of expected lifespan used End of life

Detected Contaminants

How Jasper Water Works and Sewer Board compares to EPA limits

Total Trihalomethanes (TTHM) 4 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns
Haloacetic Acids (HAA5) 2 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.06 mg/L
Cancer risk; reproductive & developmental effects
Chlorite 1 mg/L (100% of limit)
0 EPA Limit: 1 mg/L
Anemia and nervous system effects in infants and children

What This Means For You

Total Trihalomethanes (TTHM) at 4 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Haloacetic Acids (HAA5) at 2 mg/L exceeds the EPA maximum of 0.06 mg/L. Cancer risk; reproductive & developmental effects. Consider granular activated carbon (GAC) filtration.

Lead and Copper Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Total Coliform at 1 presence exceeds the EPA maximum of presence.

Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Alabama

North Baldwin Utilities
28,713 people
A 3 violations
B 3 violations
C 5 violations
A 4 violations
Chilton Water Authority
27,681 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation Water Filtration
Flood Insurance $1,114
Radon Mitigation $400
Water Filtration $171
Total Estimated Cost $1,686

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$5,000
10 years
$10,000
20 years
$20,000

Compare: Estimated remediation cost is $1,686 (one-time) vs. $10,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Jasper Water Works and Sewer Board (EPA ID: AL0001336) is a community water system in Alabama that serves approximately 28,638 people from surface water sources.

This system provides water to 7 ZIP codes across 4 communities.

Average Home Safety Score: B (81/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 health-based violations recorded in the past 5 years. All violations have been resolved.

Recent Violations

Date Contaminant Type Status
October 1, 2024 Lead and Copper Rule Monitoring Resolved
July 1, 2024 Total Coliform Monitoring Resolved
July 1, 2024 Chlorite Monitoring Resolved
April 1, 2024 Total Trihalomethanes (TTHM) Monitoring Resolved
November 15, 2023 Total Trihalomethanes (TTHM) Monitoring Resolved
October 1, 2023 Haloacetic Acids (HAA5) Health-based Resolved
September 6, 2023 Lead and Copper Rule Monitoring Resolved
August 24, 2023 Total Trihalomethanes (TTHM) Monitoring Resolved
July 1, 2023 Haloacetic Acids (HAA5) Health-based Resolved
May 10, 2023 Total Trihalomethanes (TTHM) Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Total Trihalomethanes (TTHM) Disinfection Byproducts 4 No
Haloacetic Acids (HAA5) Disinfection Byproducts 2 Yes
Lead and Copper Rule Treatment Failure 2 No
Chlorite Disinfection Byproducts 1 No
Total Coliform Microbiological 1 No

Health Risk Details

Haloacetic Acids (HAA5) (EPA limit: 0.06 mg/L)

Cancer risk; reproductive & developmental effects At-risk groups: pregnant women, infants, long-term consumers of chlorinated municipal water.

Removal methods: granular activated carbon (GAC), carbon block filter, reverse osmosis. Find the right filter →

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
35501 0.005 mg/L No N/A
35502 0.005 mg/L No N/A
35503 0.005 mg/L No N/A
35504 0.005 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 6 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Jasper Water Works and Sewer Board (AL0001336) on EPA.gov.

Frequently Asked Questions

Is Jasper Water Works and Sewer Board water safe to drink?

Jasper Water Works and Sewer Board has recorded 2 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Jasper Water Works and Sewer Board serve?

Jasper Water Works and Sewer Board serves approximately 28,638 people across 7 ZIP codes in Alabama.

Where does Jasper Water Works and Sewer Board get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
205-221-2141
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
1620 Alabama Avenue, Jasper, Alabama 35501

Contact information from Jasper Water Works and Sewer Board, INC. Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Surface water
Drawn from rivers, lakes, or reservoirs.
Disinfectant used
Chlorine dioxide
Treatment chemicals reported
chlorine dioxidelimesodium permanganatealumchlorinezinc orthophosphate

Source: Jasper Water Works and Sewer Board, INC. Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from Jasper Water Works and Sewer Board, INC. Consumer Confidence Report:
It has been determined by the results of the assessment that our source water susceptibility ranking has a LOW potential to contamination.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Multi-stage
Multiple treatment stages — typically coagulation, filtration, and disinfection. Common for surface-water systems requiring removal of particulates, microorganisms, and dissolved organic compounds before disinfection.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine dioxidechlorine
pH adjustment
Raises or lowers water acidity to protect pipes and improve treatment performance.
lime
Corrosion inhibitor
Coats pipe interiors to reduce lead and copper leaching from premise plumbing.
zinc orthophosphate
Coagulant
Causes suspended particles to clump together so they can be removed by filtration.
alum
Other reported chemicals
Reported by the utility but not in our annotation dictionary.
sodium permanganate

Treatment classification and chemical list sourced from Jasper Water Works and Sewer Board, INC. Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
580
Galvanized — Replacement Required
5,072
Unknown Material
6,702
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 28,638
Reported to Alabama

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

pH
7.6
How acidic or basic the water is on a 0-14 scale. Drinking water is typically near neutral.
EPA secondary range: 6.5 – 8.5
Total dissolved solids
109 ppm
Mineral content remaining after evaporation, including calcium, magnesium, sodium, and other dissolved substances.
EPA secondary MCL: 500 ppm

Aesthetic measurements from Jasper Water Works and Sewer Board, INC. Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • monitoring · Disinfection By-products (DBP)
    2023-07-01 to 2023-09-30
    Did not monitor for Disinfection By-products at the correct monitoring sites during July-September 2023.

Violations record from Jasper Water Works and Sewer Board, INC. Consumer Confidence Report.

Notable events from the utility's CCR

These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.

Notable events from Jasper Water Works and Sewer Board, INC. Consumer Confidence Report:
  • During the October-December 2023 sampling period, sampling sites were updated. A third-party laboratory mistakenly sampled the previous sites, resulting in a monitoring violation.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Jasper Water Works and Sewer Board safe to drink?
Jasper Water Works and Sewer Board earns a B safety grade with 10 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Jasper Water Works and Sewer Board's water?
Detected contaminants include Total Trihalomethanes (TTHM), Haloacetic Acids (HAA5), Lead and Copper Rule, Chlorite. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 4 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Jasper Water Works and Sewer Board serve?
Jasper Water Works and Sewer Board serves approximately 28,638 people with drinking water across 7 ZIP codes.
What is Jasper Water Works and Sewer Board's water source?
Jasper Water Works and Sewer Board draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Jasper Water Works and Sewer Board's water?
The maximum detected lead level is 0.005 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Jasper Water Works and Sewer Board's service area?
The Jasper Water Works and Sewer Board service area has a median household income of $51,534. EPA EJScreen data classifies 89% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Jasper Water Works and Sewer Board get its water?
Jasper Water Works and Sewer Board's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Jasper Water Works and Sewer Board (EPA ID: AL0001336) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Alabama Jasper Water Works and Sewer Board

Get safety alerts for Jasper Water Works and Sewer Board, Alabama

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.