Health Violations Found AL 1 HEALTH VIOLATION

Attalla Water Works Board

EPA ID: AL0000572 · 8,403 people served · 3 ZIP codes

In the five-year tracking period, Attalla Water Works Board filed 4 violations — each has been cleared, and the utility now meets all federal standards for its 8,403 residents.

Data: EPA SDWIS Last verified: 2026-04-02

C · 65
Avg Safety Score
8,403
People Served
3
ZIP Codes Served
4
Violations (5yr)
Surface Water
Water Source
0.005 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
3
Contaminants Flagged
$131K
Median Home Value in Service Area

Service Area Map

Coverage area for Attalla Water Works Board Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$56,004
Median Household Income
23,913
Service Area Population
77%
Disadvantaged Population
60th
Poverty Percentile
80th
Energy Burden Percentile
67%
Pre-1986 Housing

The Attalla Water Works Board serves a community with a median household income of $56,004 and an estimated 23,913 residents across its service area. Approximately 67% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 77% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Attalla Water Works Board's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
50th
Wastewater Discharge Proximity
20th
Superfund Site Proximity

About 0% of homes in Etowah County, Alabama rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

57 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
10 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 85% of expected lifespan used End of life

Detected Contaminants

How Attalla Water Works Board compares to EPA limits

What This Means For You

Consumer Confidence Report Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 23 detections recorded. 6 exceed federal EPA limits (4 ppt for PFOA/PFOS). 6 exceed state limits.

State limits: PFOA: 0.004 ppt, PFOS: 0.004 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Alabama

0 violations
B 0 violations
0 violations
0 violations
C 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment Radon Mitigation Water Filtration
Flood Insurance $800
PFAS Treatment $600
Radon Mitigation $400
Water Filtration $100
Total Estimated Cost $1,900

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $1,900 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Attalla Water Works Board (EPA ID: AL0000572) is a community water system in Alabama that serves approximately 8,403 people from surface water sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: C (65/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 health-based violation recorded in the past 5 years. All violations have been resolved.

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Consumer Confidence Report Rule Reporting Failure 2 Yes
Stage 1 DBP Rule Treatment Failure 1 No
Lead and Copper Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
35954 0.005 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by AL or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Attalla Water Works Board (AL0000572) on EPA.gov.

Frequently Asked Questions

Is Attalla Water Works Board water safe to drink?

Attalla Water Works Board has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Attalla Water Works Board serve?

Attalla Water Works Board serves approximately 8,403 people across 3 ZIP codes in Alabama.

Where does Attalla Water Works Board get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
232

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
2
Galvanized — Replacement Required
135
Unknown Material
2,976
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 8,403
Reported to Alabama

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Attalla Water Works Board safe to drink?
Attalla Water Works Board has a C safety grade based on 4 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Attalla Water Works Board's water?
Detected contaminants include Consumer Confidence Report Rule, Stage 1 DBP Rule, Lead and Copper Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Attalla Water Works Board serve?
Attalla Water Works Board serves approximately 8,403 people with drinking water across 3 ZIP codes.
What is Attalla Water Works Board's water source?
Attalla Water Works Board draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Attalla Water Works Board's water?
The maximum detected lead level is 0.005 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Attalla Water Works Board's service area?
The Attalla Water Works Board service area has a median household income of $56,004. EPA EJScreen data classifies 77% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Attalla Water Works Board get its water?
Attalla Water Works Board's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Attalla Water Works Board (EPA ID: AL0000572) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Alabama Attalla Water Works Board

Get safety alerts for Attalla Water Works Board, Alabama

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.