Monitoring Violations AL

Jemison Water Works

EPA ID: AL0000219 · 4,365 people served · 7 ZIP codes

Looking at the EPA enforcement file for Jemison Water Works, 1 violation are listed as unresolved — those findings cover the utility's service area of approximately 4,365 people and remain open in the federal compliance system, awaiting formal corrective action documentation.

Data: EPA SDWIS Last verified: 2026-04-02

B · 72
Avg Safety Score
4,365
People Served
7
ZIP Codes Served
2
Violations (5yr)
Groundwater
Water Source
0.005 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
1
Contaminants Flagged
$164K
Median Home Value in Service Area

Service Area Map

Coverage area for Jemison Water Works Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$62,078
Median Household Income
69,197
Service Area Population
52%
Disadvantaged Population
59th
Poverty Percentile
71th
Energy Burden Percentile
46%
Pre-1986 Housing

The Jemison Water Works serves a community with a median household income of $62,078 and an estimated 69,197 residents across its service area. Approximately 46% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 52% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Jemison Water Works's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
47th
Wastewater Discharge Proximity
21th
Superfund Site Proximity

About 1% of homes in Shelby County, Alabama rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

36 yr
Avg Pipe Age
Copper
Pipe Material
33 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 52% of expected lifespan used End of life

Detected Contaminants

How Jemison Water Works compares to EPA limits

Contaminant 1009 2 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.004 mg/L
Intestinal damage, bone damage

What This Means For You

Contaminant 1009 at 2 mg/L exceeds the EPA maximum of 0.004 mg/L. Intestinal damage, bone damage. Consider reverse osmosis filtration.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 32 detections recorded. 8 exceed federal EPA limits (4 ppt for PFOA/PFOS). 8 exceed state limits.

State limits: PFOA: 0.004 ppt, PFOS: 0.004 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Contaminant 1009 was detected in this water system. reverse osmosis filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Alabama

C 13 violations
0 violations
Bethel Water System
4,398 people
B 0 violations
Moundville (city Of)
4,404 people
B 1 violation

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,286
Radon Mitigation $400
PFAS Treatment $343
Water Filtration $43
Total Estimated Cost $2,071

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,071 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Jemison Water Works (EPA ID: AL0000219) is a community water system in Alabama that serves approximately 4,365 people from groundwater sources.

This system provides water to 7 ZIP codes across 6 communities.

Average Home Safety Score: B (72/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Contaminant 1009 Other Violation 2 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
36792 0.005 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by AL or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Jemison Water Works (AL0000219) on EPA.gov.

Frequently Asked Questions

Is Jemison Water Works water safe to drink?

Jemison Water Works has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Jemison Water Works serve?

Jemison Water Works serves approximately 4,365 people across 7 ZIP codes in Alabama.

Where does Jemison Water Works get its water?

The primary water source is groundwater.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
117
Galvanized — Replacement Required
475
Unknown Material
1,358
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 4,365
Reported to Alabama

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Jemison Water Works safe to drink?
Jemison Water Works earns a B safety grade with 2 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Jemison Water Works's water?
Detected contaminants include Contaminant 1009. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Jemison Water Works serve?
Jemison Water Works serves approximately 4,365 people with drinking water across 7 ZIP codes.
What is Jemison Water Works's water source?
Jemison Water Works draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Jemison Water Works's water?
The maximum detected lead level is 0.005 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Jemison Water Works's service area?
The Jemison Water Works service area has a median household income of $62,078. EPA EJScreen data classifies 52% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Jemison Water Works get its water?
Jemison Water Works's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Jemison Water Works (EPA ID: AL0000219) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Alabama Jemison Water Works

Get safety alerts for Jemison Water Works, Alabama

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.