New York, NY (10200): 4 Violations — 48/100 (2026)
EPA data for New York City System
The water system at 10200 in New York, NY has 4 violations in the federal ledger — all sit outside the health-based category, meaning EPA did not find contaminant levels above safety thresholds.
Data source: U.S. Environmental Protection Agency (EPA) SDWIS Last verified: April 2, 2026
Key Findings
5 other areas checked — no concerns found.
At a Glance
- Water EPA records show 4 violations (non-health) on the water system serving this ZIP (5-year window).
- Lead Lead reading of 0.010 mg/L is below EPA action level but elevated; filtration is advisable.
- Radon EPA Zone 1 — predicted average indoor radon above 4 pCi/L. Test your home.
Composite Home Safety Score has been stable over the tracking period.
What’s Happening in New York, New York
This area is in EPA Radon Zone 1 (highest risk).
What's Happening
decliningNew violation reported
Updated 2026-06-03 · Based on EPA and public utility data
Consider a whole-home water filter
This ZIP's Home Safety Score is 48/100 — in the bottom 90% nationally. See the sections below for a detailed breakdown.
Recommended Buyer Guides for This ZIP
Independent guides — grounded in EPA, NSF, FEMA, and CDC standards. Matched to risks detected in your area.
- Best Radon Test Kits — EPA Radon Zone 1 (highest risk)
This Summer — what to check
Season-specific maintenance for home safety. Universal tasks — apply everywhere unless noted.
-
Water Heater
Flush sediment (1–2×/year). Cuts energy use and prevents bacterial growth in low-use hot-water pockets.
Source: DOE -
Wildfire & Smoke
Clear leaves and debris from gutters and the 30-ft home-ignition zone. Replace HVAC filters with MERV 13+.
Source: Firewise -
HVAC Filter
Peak AC run. Replace filters monthly during high pollen / wildfire-smoke days; standard interval otherwise.
Source: EPA IAQ
Get notified when water quality changes in your area
Free alerts when new EPA data affects ZIP code 10200. No spam — just safety updates.
Unsubscribe anytime. We only send updates when your safety score changes. See our Privacy Policy.
How New York Compares
Safety Score vs. Columbia County and New York averages
| Metric | New York | Columbia County | New York |
|---|---|---|---|
| Safety Score | 48 | 53 | 61 |
| EPA Violations (total) | 4 | 3.4 | 6.9 |
| Lead (ppb) | 10 | 2.8 | 7.5 |
County and state averages computed from 41,344 ZIP codes. Data: EPA SDWIS.
See incorrect data? Let us know
Although the dataset for New York (10200) is limited in scope, one critical condition stands as the only elevated finding on record.
🔍Key Insights for New York 10200
Derived from EPA, Census, FEMA, and EIA data — exclusive to ZipCheckup
Score Breakdown
How your Home Safety Score of 42 is calculated.
Score improved by 3 points over 90 days.
Safety & Health (10) HIGH
Compliance Alerts for 10200
1 issue flagged based on EPA data, state regulations, and housing age estimates.
Estimates based on EPA data, U.S. Census ACS housing vintage, and state regulations. Individual homes may vary.
Compliance Risk Forecast
Probability of future drinking water violations based on historical patterns, enforcement trends, and system size.
95% probability of new violation within 2 years
Based on 1.6 events/year rate. Model uses Poisson distribution with trend and system-size adjustments.
Service Disruption Risk
Elevated30% estimated probability of a boil water advisory or service interruption in the next 90 days.
Based on infrastructure age, EPA violation history, flood exposure, and seasonal patterns.
Estimates based on EPA enforcement data, U.S. Census ACS housing vintage, and FEMA flood claims. Not a guarantee of disruption.
Your Water System
ZIP code 10200 in New York, New York is served by New York City System (EPA ID: NY7003493). This system provides water to approximately 8,271,000 people from surface water sources.
There are 4 community water systems serving this area.
Home Safety Score: D (48/100)
Based on water quality violations, lead levels, and radon risk in your area. This score is better than 10% of ZIP codes nationally and 20% in New York.
| Factor | Status | Details |
|---|---|---|
| Water Quality | warning | 4 violations, 0 health-based |
| Lead in Water | safe | 0.01 mg/L (EPA action level: 0.015 mg/L) |
| Radon Risk | High | Zone 1 |
| Superfund NPL | Very High | nearest 2.6 mi (Radium Chemical Co., Inc.), 6 sites within 10 km |
Lead & Copper in Your Water
The EPA requires water systems to monitor lead and copper levels under the Lead and Copper Rule.
| Metal | Measured Level | EPA Action Level | Status | Sample Date |
|---|---|---|---|---|
| Lead | 0.01 mg/L | 0.015 mg/L | Within limit | N/A |
Radon Risk
Radon Zone 1 — High potential (Columbia County)
EPA recommends all homes in this area be tested for radon. Zone 1 indicates the highest radon potential (predicted average indoor radon screening level greater than 4 pCi/L).
Superfund Site Proximity
Proximity Risk: Very High (score: 75/100)
Nearest NPL site: Radium Chemical Co., Inc. at 2.6 miles (4.2 km).
| Radius | NPL Sites |
|---|---|
| Within 5 km (3.1 mi) | 1 |
| Within 10 km (6.2 mi) | 6 |
| Within 25 km (15.5 mi) | 35 |
Nearest NPL Sites
- Radium Chemical Co., Inc. — 2.6 mi (Deleted), listed 11/21/1989
- Quanta Resources — 3.1 mi (Active Cleanup), listed 09/05/2002
- Meeker Avenue Plume — 3.2 mi (Active Cleanup), listed 03/16/2022
- Newtown Creek — 3.9 mi (Active Cleanup), listed 09/29/2010
- Grand Street Mercury — 4.7 mi (Deleted), listed 09/25/1997
Search nearby sites at the EPA Superfund Site Search. If you garden or use well water near an NPL site, consider soil and water testing.
Violation Summary
Contaminants Detected
The following contaminants have been flagged in EPA records for water systems serving this ZIP code:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Lead | Inorganic | 1 | No |
| Consumer Confidence Report Rule | Reporting | 1 | No |
| Stage 1 DBP Rule | Treatment Technique | 1 | No |
Energy Costs in NY
Residential electricity rate: 28.37¢/kWh — 67% above the national average (17.0¢/kWh).
High electricity rates in New York make energy-efficient appliances and heat pumps particularly valuable for reducing utility bills.
Energy Sources
New York generates 28.8% of its electricity from renewable sources. Including nuclear, 50.4% of the state's power is carbon-free (EIA 2025).
| Source | Share |
|---|---|
| Natural gas | 47.2% |
| Nuclear | 21.6% |
| Hydroelectric | 19.6% |
| Wind | 5.2% |
| Solar | 4% |
| Petroleum | 1% |
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
Water Systems Serving This Area
| System Name | EPA ID | Population | Source |
|---|---|---|---|
| New York City System | NY7003493 | 8,271,000 | Surface water |
| High-tor Properties | NY4313899 | 300 | Groundwater |
| Creeks Edge Mhp | NY1012338 | 55 | Groundwater |
| Pleasant Valley Meadows | NY1330461 | 50 | Groundwater |
What You Can Do
- Review your annual Consumer Confidence Report (CCR) — Your utility publishes this each July
- Test your home's water — Especially if you have older plumbing (pre-1986) that may contain lead
- Stay informed — Bookmark this page to check for updates on your water quality
Need help with water testing or filtration?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
Other Water Quality Reports in New York
- 06390 (Fishers Island) — 5 violations
- 10001 (New York) — 4 violations
- 10002 (New York) — 4 violations
- 10003 (New York) — 4 violations
- 10004 (New York) — 4 violations
- 10005 (New York) — 4 violations
- 10006 (New York) — 4 violations
- 10007 (New York) — 4 violations
- 10008 (New York) — 4 violations
- 10009 (New York) — 4 violations
- 10010 (New York) — 4 violations
- 10011 (New York) — 4 violations
- 10012 (New York) — 4 violations
- 10013 (New York) — 4 violations
- 10014 (New York) — 4 violations
- 10015 (New York) — 4 violations
- 10016 (New York) — 4 violations
- 10017 (New York) — 4 violations
- 10018 (New York) — 4 violations
- 10019 (New York) — 4 violations
Nearby Water Quality Reports
- 10162 (New York) — <1 mi — 4 violations
- 10028 (New York) — <1 mi — 4 violations
- 10021 (New York) — <1 mi — 4 violations
- 10044 (New York) — <1 mi — 4 violations
- 10065 (New York) — <1 mi — 4 violations
- 10128 (New York) — <1 mi — 4 violations
- 10155 (New York) — 1 mi — 4 violations
- 10022 (New York) — 1 mi — 4 violations
- 11102 (Astoria) — 1 mi
- 11106 (Astoria) — 1 mi
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for New York City System (NY7003493) on EPA.gov.
Frequently Asked Questions
Is the tap water in 10200 safe to drink?
Based on EPA records, the water system serving ZIP code 10200 has only monitoring/reporting violations, which are procedural in nature. However, individual home conditions (old pipes, well water) can affect quality.
Where does 10200's water come from?
The primary water source for this area is surface water. New York City System serves approximately 8,271,000 people.
How can I get my water tested?
Contact your local water utility for a free water quality report, or hire a certified lab for independent home water testing. The EPA recommends testing annually if you use a private well.
Does 10200 have lead in the water?
Lead and Copper Rule sampling data for ZIP code 10200 shows a lead level of 0.01 mg/L, which is below the EPA action level of 0.015 mg/L. Still, older homes with lead service lines or pre-1986 plumbing may have higher levels at individual taps.
What is the radon risk in 10200?
ZIP code 10200 (Columbia County) falls in EPA Radon Zone 1, indicating high radon potential. The EPA recommends all homes in Zone 1 areas be tested for radon. Radon is a naturally occurring radioactive gas that can accumulate in homes and is the second leading cause of lung cancer in the U.S.
Contaminant Stress Analysis
Statistical envelope (p10/p50/p90) of measured contaminant levels compared to EPA Maximum Contaminant Levels (MCL). Based on enforcement and compliance monitoring data.
All measured values of Lead (LCR 90th) remain below the MCL of 15 PPB.
New York Water Quality Overview
New York sets additional monitoring requirements beyond federal rules and has been expanding PFAS testing across public water supplies. ZipCheckup analyzes lab results from 4,662 water systems across New York, covering 16 contaminants from 2 data sources. The most frequently tested contaminants include Lead (Pb 90th %ile), NEtFOSAA, NMeFOSAA. Overall, New York earns a water quality grade of C (average score: 61/100) across 2,186 ZIP codes. 53% of tested systems have at least one EPA violation on record. If you live in New York, review the contaminant table above for your specific water system — state averages may not reflect local conditions.
Score History
Tracking since 2021-12-31 · 59 data points
Safety Score Timeline
Environmental Incidents
Health-Based Violations
Enforcement Actions
Understanding EPA Enforcement
- MCL Violation — Contaminant exceeded the Maximum Contaminant Level set by EPA
- Treatment Technique (TT) — Water system failed to follow required treatment methods
- Formal Enforcement — EPA or state issued a legal order (administrative order, court action, or compliance order)
- Resolved — The water system returned to compliance
Source: EPA Enforcement and Compliance History Online (ECHO). Data from the Safe Drinking Water Information System (SDWIS). Updated quarterly.
Health Risks from Detected Contaminants
Lead
High RiskEPA limit: 0.015 mg/L (action level)
Brain damage in children, kidney & blood pressure in adults
At-risk groups: infants, children under 6, pregnant women
Removal: reverse osmosis, distillation, certified carbon block filter (NSF/ANSI 53) · Find a filter →
Consumer Confidence Report
2025 ReportAnnual water quality report published by New York City Department of Environmental Protection for ZIP code 10200.
Key Contaminants
| Contaminant | Level | MCL | Status |
|---|---|---|---|
| Haloacetic Acid 5 (HAA5) | 47 μg/L | 60 μg/L | Within Limit |
| Total Trihalomethanes (TTHM) | 52 μg/L | 80 μg/L | Within Limit |
| Lead | 10 μg/L | 15 μg/L | Within Limit |
Lead & Copper Rule Results
What Is a Consumer Confidence Report?
Every community water system in the U.S. is required by the EPA to publish an annual Consumer Confidence Report (CCR), also known as a Water Quality Report. It lists all detected contaminants, their levels compared to federal limits (MCLs), and information about where your water comes from.
How to Read Your CCR
- MCL (Maximum Contaminant Level) — the highest level of a contaminant allowed in drinking water
- MCLG (Maximum Contaminant Level Goal) — the level below which there is no known health risk
- Action Level — used for lead and copper; triggers treatment if exceeded at the 90th percentile
- A violation means detected levels exceeded the MCL — your utility must notify you and take corrective action
Based on your water data
Removes chlorine taste and disinfection byproducts. Addresses Lead and THMs (disinfection byproducts) detected in your water.
View details →Removes 99%+ of lead and PFAS. View details →
CCR data shows community averages. A home water test confirms what's actually coming from your tap. Tap Score Essential Water Test ($199) — epa-certified lab results in 3–5 days. Get test kit →
Product links are affiliate links — we may earn a commission at no extra cost to you. Recommendations are based on NSF certifications and EPA contaminant data, not advertiser influence. See our disclosure.
Recommended Water Filters
High PriorityBased on 1 contaminant, including MCL violations.
Lead detected at 100 ppb (exceeds MCL of 15 ppb)
Get a detailed filter match based on your ZIP code's water data
Find the Right Filter for Your Water →Recommendations are based on contaminants detected in the most recent Consumer Confidence Report. Individual results may vary. Look for filters with the certifications listed above. Product mentions are not endorsements.
Childhood Environmental Risk Score — 10200
High RiskThis ZIP's score is higher than 83% of U.S. ZIP codes — a relative ranking, not a verdict on any home.
Risk Factor Breakdown
Water system violation history is the largest contributor to this ZIP's score. A pattern of violations can signal recurring quality issues worth monitoring, and reviewing a system's recent record helps families know what to ask about.
- Children under 6 are most vulnerable to lead exposure — there is no safe level of lead in blood
- Test your home's drinking water, especially if your home was built before 1986
- Consider a certified water filter (NSF/ANSI 53 for lead removal) for drinking and cooking water
- Ask your pediatrician about blood lead level testing at well-child visits
What families can do
Here are calm, practical steps families in this ZIP can consider — informational guidance, not cause for alarm.
- Ask your pediatrician whether a blood lead test is appropriate at a child's next well-child visit.
Know a family in 10200? A free 30-second ZIP check shows them the same lead, water, and housing data.
Lead Pipe Replacement Funding for New York
Key LCRI Deadlines
What This Means for You
- If your home was built before 1986, it may have lead service lines
- Your water utility is required to inventory and replace lead lines at no cost to you
- Contact your water utility to check if your address is in their inventory
Source: EPA DWSRF Lead Service Line Replacement Program, FY2025 Allotment Memorandum.
Active Alerts in New York
0 active weather alerts in New York. Severe weather can affect your water quality and home safety.
Environmental Hazards (5) MODERATE
Air Quality for 10200
Air quality is satisfactory, and air pollution poses little or no risk. Enjoy outdoor activities.
Termite Risk for 10200
Moderate Termite ZoneRequired for VA/FHA loans in select southern counties; not statewide
VA/FHA loan in designated counties will not close without NPMA-33
Termite Damage in the U.S.
- Termites cause an estimated $5 billion in property damage annually in the United States, according to the USDA.
- Standard termite treatment costs $225–$2,500; fumigation for severe infestations: $2,000–$8,000.
- Homeowner insurance typically does not cover termite damage, as it is considered preventable.
What Homeowners Should Know
- Annual termite inspections are recommended in moderate-to-heavy risk zones. Early detection can prevent thousands in repair costs.
- VA and FHA loans require a clear NPMA-33 (Wood Destroying Insect Inspection Report) for closing in most states.
- Warning signs: mud tubes on foundation walls, hollow-sounding wood, discarded wings near windows, and frass (droppings) near baseboards.
- Preventive treatment ($200–$900 per year) is far less expensive than structural damage repair, which averages $3,000 and can exceed $50,000.
- Even in lower-risk zones, subterranean termites can be active. Consider an inspection if purchasing an older home or if you notice warning signs.
Source: USDA Forest Service Termite Infestation Probability (TIP) zones, VA/FHA lender requirements, New York pest control regulations. Inspection cost estimates reflect typical market rates and may vary by provider, property size, and location. This information is for general guidance only.
Pest Risk for 10200
Moderate Pest Pressurebed bugs, rodents, cockroaches, ticks and carpenter ants
- Lyme disease endemic area
- West Nile activity zone
Required for VA loans in all states; not state-mandated
Up to $10,000 per violation
Why This Matters
- Health risks: Mosquitoes transmit West Nile virus (1,000+ U.S. cases annually). Ticks spread Lyme disease (estimated 476,000 cases/year per CDC). Rodent droppings can carry hantavirus.
- Property damage: Carpenter ants and termites cause billions in structural damage annually. Rodents gnaw wiring, creating fire hazards.
- Food safety: Cockroaches and rodents contaminate food preparation areas and can trigger allergies and asthma, especially in children.
- New York experiences seasonal pest pressure peaks. Annual inspections help catch infestations early before they become costly.
Common Questions
Source: CDC vector-borne disease surveillance, EPA pesticide regulation data, New York pest control board, NPMA pest prevalence maps. Inspection cost estimates reflect typical market rates and may vary by provider, property size, and location. This information is for general guidance only.
Mold Risk Assessment for 10200
Low RiskSummer months (June–August) present the highest mold risk in 10200, with average humidity reaching 68%. Indoor humidity can be 10–15% higher in poorly ventilated spaces. Winter humidity drops to 68%, reducing but not eliminating risk.
Why Mold Matters
- The CDC and EPA identify mold as a significant indoor health hazard. Common symptoms include respiratory irritation, allergic reactions, and asthma exacerbation.
- Mold begins growing within 24–48 hours on damp surfaces when relative humidity exceeds 60%. Bathrooms, basements, and crawl spaces are most vulnerable.
- Professional mold remediation costs $1,500–$9,000 on average. Homeowner insurance often excludes mold coverage unless caused by a "covered peril."
- Homes built before 1980 typically lack modern vapor barriers and ventilation systems, increasing moisture infiltration risk.
Prevention Recommendations
- Use a dehumidifier to keep indoor humidity below 50%. This is especially important in basements, crawl spaces, and bathrooms in high-humidity areas like 10200.
- Ensure proper ventilation: use exhaust fans in bathrooms and kitchens, and keep attic and crawl space vents unblocked.
- Fix leaks immediately. Even small plumbing leaks can create mold-favorable conditions within 48 hours.
- Monitor indoor humidity with a hygrometer ($10–$20). Target 30–50% year-round.
With 68% average humidity, a dehumidifier is the most effective way to reduce mold risk in 10200. Energy Star-rated units cost $200–$400 and can reduce humidity by 20–30%.
Respiratory Risk Today
Moderate RiskSuperfund Sites & Soil Contamination Risk
Nearest Superfund (NPL) Sites
| Site Name | Distance | Status | Listed |
|---|---|---|---|
|
Radium Chemical Co., Inc.
New York City, New York
|
2.6 mi | Deleted from NPL | 11/21/1989 |
|
Quanta Resources
Edgewater, New Jersey
|
3.1 mi | Active Cleanup | 09/05/2002 |
|
Meeker Avenue Plume
Brooklyn, New York
|
3.2 mi | Active Cleanup | 03/16/2022 |
|
Newtown Creek
Brooklyn, Queens, New York
|
3.9 mi | Active Cleanup | 09/29/2010 |
|
Grand Street Mercury
Hoboken, New Jersey
|
4.7 mi | Deleted from NPL | 09/25/1997 |
What Are Superfund NPL Sites?
The National Priorities List (NPL) is the EPA's list of the most contaminated sites in the United States. These sites are eligible for federal cleanup funding under CERCLA (the "Superfund" law). Common contaminants include heavy metals, volatile organic compounds (VOCs), pesticides, and industrial solvents that can leach into soil, groundwater, and air.
- Active Cleanup: EPA is investigating or remediating the site — contamination may still be present.
- Construction Complete: Physical cleanup is done, but long-term monitoring continues.
- Deleted: Site meets EPA cleanup standards and has been removed from the NPL.
Know What's in Your Soil
If you live near a Superfund site, a home soil test kit can detect heavy metals, lead, and other contaminants — especially important if you garden, have children, or use well water.
Product links may earn a commission — see our disclosure.
Home & Infrastructure (4) OK
Home Buyer Risk Report
An inspection-grade snapshot of public-data risk factors for this ZIP, built to help a buyer decide what to verify before closing.
Public federal data shows a low overall risk profile for this ZIP. The checklist below works alongside a standard home inspection.
Seven-factor inspection checklist
Each factor below is scored 0–100 from public federal data. A higher score means the factor is more worth verifying before you buy.
The local water system's recent EPA violation and contaminant history, along with an independent tap-water test, gives more context.
The FEMA flood zone, whether the property has flooded before, and flood-insurance requirements are key points to review.
The EPA recommends testing every home for radon; homes in EPA Radon Zone 1 have the highest potential.
Local air-quality history is useful context; for sensitive occupants, an HVAC system with good filtration helps.
Nearby hazards
EPA Superfund sites within 10 km: 6. Nearest: Radium Chemical Co., Inc. (about 4.2 km away).
Modeled probability of a local water-service disruption in the next 90 days.
See the 90-day disruption outlookInspection-day checklist
Practical items to raise with your inspector, agent, or the seller — tailored to this ZIP's data.
- Test for radon before closing — the EPA recommends it, especially in Radon Zone 1.
- Review the local water system's recent disruption and violation history with the utility.
- Hire an independent home inspector for a full walkthrough of the property.
- Read the seller's disclosure and any past inspection or repair records.
- Ask for service records for the HVAC system, water heater, and roof.
What this means
- This report consolidates seven home-purchase risk factors and nearby hazards from public federal data into one place.
- Each flagged item is a recommendation to verify independently — not a finding of a defect.
- An independent home inspection remains an essential step before closing.
Methodology: The report combines the home purchase risk score — a seven-factor composite of public federal data — with EPA Superfund, ATSDR, water-disruption, and NRC nuclear-zone proximity datasets. All figures are modeled estimates.
Informational only. This is a modeled summary of public federal data, not a home inspection, an appraisal, or a prediction of defects. Verify any concern with a qualified inspector before a purchase.
Water Infrastructure Risk
Risk Factor Breakdown
What This Means
ZIP code 10200 has some aging water infrastructure. While not at the highest risk level, periodic water testing is a sensible precaution, particularly if your home was built before 1980.
Infrastructure Decay & Disruption
Water pipe decay
Local water mains are modeled to reach a critical service threshold within about 3 years.
This is the modeled probability of a boil-water advisory or water-service interruption in the next 90 days.
See the full service-disruption breakdown →What this means
- This score blends four public federal datasets — water-pipe decay, bridge condition, gas-pipeline incident history, and a 90-day disruption estimate — into one area-level measure of infrastructure stress.
- It describes the infrastructure around a home, not the condition of the home itself, and it is a modeled estimate rather than an engineering assessment.
- Aging water mains raise the chance of breaks and service interruptions; a plumber can inspect a home's own supply line and shut-off valve.
Methodology: Water-pipe decay is modeled with an exponential-decay bathtub curve from Census ACS housing age, EPA ECHO compliance records, and EPA infrastructure-needs data. Bridge condition is from the FHWA National Bridge Inventory; gas-pipeline incidents from PHMSA; the 90-day disruption estimate from EPA and FEMA data. The stress score is a weighted composite of these four signals.
All figures are modeled estimates from public federal data. They are not engineering assessments, predictions of failure, or a judgment about any specific structure or utility.
Underground Oil Tank: Low Risk for 10200
New York regulates underground heating oil tanks, but only 0% of homes in 10200 were built before 1980 — the era when underground steel tanks were commonly installed. The risk of encountering a buried oil tank in this ZIP code is relatively low. If purchasing a pre-1980 home, a tank sweep is still recommended.
Source: New York environmental regulations (ECL Article 17 Title 10; 6 NYCRR Part 613), U.S. Census ACS housing vintage data.
Remodeling Permit Requirements in New York
⚠ Strict Permit EnforcementStructural, electrical, plumbing, mechanical, fire protection. NYC has separate, stricter building code.
Fines up to $5,000 (NYC: up to $25,000), stop-work orders, ECB violations, mandatory correction
Why This Matters
- Unpermitted work can reduce your home's appraised value by 10–20% and complicate or block a sale entirely.
- Homeowner insurance may deny claims for damage caused by or related to unpermitted renovations.
- Buyers' lenders may require proof of permits before approving a mortgage, especially for kitchens, bathrooms, and structural changes.
- Unpermitted electrical and plumbing work is a leading cause of house fires and water damage — permits exist to ensure safety inspections.
- If you are planning remodeling work in New York, contact your local building department before starting any project that alters structure, electrical, plumbing, or mechanical systems.
Remodeling Permit Questions for 10200
What remodeling work requires a permit in New York?
In New York, permits are generally required for any work that alters the structure, electrical wiring, plumbing, or mechanical systems of a home. This includes kitchen and bathroom renovations involving plumbing or electrical changes, wall removal, room additions, window enlargements, re-roofing, and HVAC replacement. Purely cosmetic work — painting, flooring, cabinet refacing without plumbing changes — typically does not require a permit. Always check with your local building department, as municipal requirements may be stricter than state minimums.
What happens if I remodel without a permit in New York?
Working without a required permit in New York can result in Fines up to $5,000 (NYC: up to $25,000), stop-work orders, ECB violations, mandatory correction. Beyond legal penalties, unpermitted work creates problems when selling: buyers' home inspectors and appraisers flag unpermitted additions, lenders may refuse financing, and title companies may require permits to be obtained retroactively — often at 2–3 times the original permit fee. In serious cases, you may be required to open walls for inspection or demolish non-compliant work.
How much does a remodeling permit cost in New York?
Remodeling permit fees in New York typically range from $200 to $5000, depending on the scope and value of the project. Most jurisdictions calculate fees as a percentage of the project's estimated construction cost (usually 1–2%) or use a flat fee schedule based on project type. Electrical and plumbing sub-permits may be billed separately. Contact your local building department for an exact fee quote before starting work.
Permit requirements based on New York building codes and ICC adoption data. Costs reflect typical municipal fee schedules and may vary by jurisdiction, project scope, and valuation. This information is for general guidance only — contact your local building department for requirements specific to your project.
Cost & Community (3) OK
Tax Burden in New York
State tax rates affect cost of ownership. Here's how New York compares to national averages.
High income tax combined with significant local sales taxes
Source: Tax Foundation 2024. Income tax = top marginal rate. Sales tax = state + avg local. Property tax = effective rate on home value.
Energy Costs in New York
Residential electricity rate: 28.37¢/kWh — 67% above the national average (national avg: 17.0¢/kWh · EIA, December 2025)
New York Energy Mix
Source: EIA Form 923, 2025 data. Renewable = solar + wind + hydro + geothermal.
Home Energy Audit for 10200
The Inflation Reduction Act provides up to $8,000 in rebates and $3,200 in annual tax credits for home energy upgrades — but many provisions phase down or expire after 2032. A professional energy audit is the first step to qualifying for these incentives.
What a Home Energy Audit Covers
- Insulation levels in attic, walls, and basement
- Air leaks around windows, doors, and ducts
- Blower door test (measures total air leakage)
- HVAC efficiency and age assessment
- Water heater type and condition
- Lighting and appliance energy use
- Carbon monoxide and combustion safety
- Moisture and ventilation assessment
- Gas leak detection
- Prioritized list of recommended upgrades
- Estimated cost and savings for each upgrade
- Rebate and tax credit eligibility report
- The average home energy audit identifies $200–$400/year in savings (DOE)
- Properly sealed and insulated homes save 15% on heating and cooling costs (DOE)
- Heat pump upgrades can reduce heating costs by 30–50% compared to electric resistance
- ENERGY STAR certified windows save $101–$583/year compared to single-pane windows
- Weatherization assistance programs are available for income-qualifying households
Under the Inflation Reduction Act. Income limits apply for HEEHRA rebates. Tax credits require tax liability. IRS details →
To claim the $150 federal tax credit, your energy audit must meet DOE standards (10 CFR 440.21) and be performed by a qualified auditor. A DOE-compliant audit includes:
- Blower door test to measure air infiltration
- Infrared thermography to identify insulation gaps
- Combustion safety testing for gas appliances
- Written report with prioritized, cost-effective upgrade recommendations
Energy Audit Questions for 10200
How much does a home energy audit cost?
A professional home energy audit typically costs $150–$400 depending on the size of your home and the depth of testing. The Inflation Reduction Act provides a $150 tax credit for qualifying audits performed by a certified auditor, effectively covering a significant portion of the audit cost. Some utilities also subsidize audits for their customers.
What is the difference between an energy audit and a home inspection?
A home inspection (done during a home sale) evaluates structural and safety conditions. An energy audit specifically measures how your home uses energy and identifies efficiency improvements. Energy audits use specialized tools like blower doors, infrared cameras, and duct blasters that are not part of a standard home inspection. The audit produces a prioritized list of upgrades with estimated costs and savings.
How much can I save after an energy audit?
According to the U.S. Department of Energy, the average audit identifies $200–$400/year in savings. Actual savings depend on your home's age, current insulation, HVAC efficiency, and local energy rates. At current rates in New York, the average home spends approximately $2,979/year on electricity — a 15–25% reduction through audit-recommended upgrades could save $447–$745 annually.
What rebates and tax credits are available for energy upgrades?
The Inflation Reduction Act (IRA) provides two types of incentives: (1) Tax credits up to $3,200/year for heat pumps ($2,000), insulation ($1,600), windows ($600), and the audit itself ($150); and (2) HEEHRA rebates for income-qualifying households — up to $8,000 for heat pumps, $1,600 for insulation, $2,500 for electrical panels, and $840 for heat pump dryers. Solar panels qualify for a separate 30% tax credit through 2032.
Do I need an energy audit before installing solar panels?
An energy audit is not legally required before installing solar, but the DOE strongly recommends it. Reducing your home's energy consumption before adding solar means you need a smaller (cheaper) system to cover your needs. An audit typically identifies 15–30% in energy reductions through insulation, air sealing, and HVAC improvements — which directly reduces the size and cost of a solar installation.
How long does a home energy audit take?
A comprehensive energy audit takes 2–4 hours for a typical single-family home. The auditor will inspect the attic, basement, walls, windows, HVAC system, water heater, and ductwork. Diagnostic tests (blower door, infrared scan) add precision to the findings. You will receive a written report within 1–2 weeks with prioritized recommendations and estimated costs.
Source: U.S. Energy Information Administration (EIA), U.S. Department of Energy (DOE), Inflation Reduction Act of 2022 (P.L. 117-169).
Safety Updates for New York, New York
Violations & Enforcement Timeline
View all 11 records
Related Anomalies
Recent Product Recalls
Recent CPSC recalls for plumbing and HVAC products that may affect homes in your area.
Superbobi 7 3/8 Inch Pool Drain Covers
Shenzhen Jiangtou Technology Co. · 2026-05-14
Electric Kettles (ENFINIGY 1.5 l and ENFINIGY Pro 1.5 l)
ZWILLING J. A. Henckels Aktiengesellschaft · 2026-05-14
Electric Start Pressure Washers
Generac Power Systems Expands · 2026-05-14
1-K Kerosene Heater Fluid Portable Fuel Containers
Alliance Chemical · 2026-04-30
Take Action
Concerned about these findings? Contact your local elected officials to ask what is being done about water quality in your area.
Email Your RepresentativeDon't know who to contact? Find your local representative at usa.gov/elected-officials
Frequently Asked Questions
Is the tap water in 10200 safe to drink?
Based on EPA SDWIS data, New York's primary water system (New York City System) has 4 recorded violations in the past 5 years, including 0 health-based. Check the full report above for details.
Where does 10200's water come from?
The primary water source for ZIP code 10200 is Surface water. New York City System serves approximately 8,271,000 people.
How can I get my water tested in New York?
Contact your local water utility (New York City System) for a free Consumer Confidence Report, or hire a certified lab for independent home water testing. The EPA recommends annual testing if you use a private well.
Is lead a concern in 10200 tap water?
The most recent lead sampling for 10200 recorded 0.01 mg/L. The EPA action level is 0.015 mg/L. This result is below the EPA action level.
What is the radon risk for 10200?
10200 falls in EPA Radon Zone 1 (High risk), located in Columbia County. Zone 1 indicates the highest radon potential. Testing your home is recommended regardless of zone.
What contaminants were found in ZIP 10200 water?
According to the most recent Consumer Confidence Report, 35 contaminants were detected. The top contaminants include Haloacetic Acid 5 (HAA5) (47 μg/L), Total Trihalomethanes (TTHM) (52 μg/L), Lead (10 μg/L). See the full water quality breakdown above.
Nearby ZIP Code Reports
Water quality comparison for ZIP codes near 10200
| ZIP Code | City, State | Distance | Grade | Violations |
|---|---|---|---|---|
| 10162 | New York, NY | <1 mi | B | 4 |
| 10028 | New York, NY | <1 mi | B | 4 |
| 10021 | New York, NY | <1 mi | B | 4 |
| 10044 | New York, NY | <1 mi | B | 4 |
| 10065 | New York, NY | <1 mi | B | 4 |
| 10128 | New York, NY | <1 mi | B | 4 |
| 10155 | New York, NY | 1.1 mi | B | 4 |
| 10022 | New York, NY | 1.2 mi | B | 4 |
| 11102 | Astoria, NY | 1.2 mi | D | 0 |
| 11106 | Astoria, NY | 1.2 mi | D | 0 |
Nearby ZIP Code Reports
2026 Rankings for Your Area
Contaminants Detected in 10200
Learn more about the contaminants found in your water supply:
Overall safety breakdown
Home Safety Score →Find the right water filter
Water Filter Matcher →Compare filters, tests & services
Compare My Options →Compare with another ZIP
Compare Tool →2026 Rankings