CITY REPORT WA

George, WA: 4 Violations — 81/100 (2026)

1 ZIP code · 1 water system · Updated 2026-06-03

Throughout George and across its water systems, EPA compliance data for WA shows above-average performance — violations are minimal, none of the tracked systems have recorded repeated MCL exceedances in recent cycles, and the safety picture has held steady across multiple reporting periods.

How George Compares

George81/100
Washington avg78/100
National avg67/100

Data: EPA SDWIS Last verified: 2026-06-03

1
ZIP Codes
1
Water Systems
1
ZIPs with Violations
B · 81
Avg Safety Score
Zone 2
Radon Risk (Moderate)
$180K
Median Home Value
$400
Est. Remediation (0.2% of home value)

What You Should Know About George Water

  • Your city's water systems recorded 4 violations in the past 5 years.
  • Average lead level: 0.002 mg/L.
  • Homes built before 1986: 86% — older plumbing may contain lead solder.
  • Estimated remediation: $400 per household.
  • CDC health risk index: 12.63 — above typical levels.

Who Supplies Your Water in George

The structure of water supply in George, WA is straightforward: one utility provides the bulk of residential service among 1 tracked system, concentrating rate-setting and infrastructure decisions under a single organization.

City of George
Serves ~1,035 people · 4 violations
81
/100

Overview

We track water quality and home safety data for 1 ZIP code in George, Washington (population ~239), covering 1 community water system serving approximately 1,035 people region-wide.

1 of 1 ZIP code (100%) have recorded EPA violations. All violations are monitoring/reporting type.

Home Safety Score

Average Home Safety Score for George: B (81/100)

The score combines three factors:

Factor What It Measures
Water Quality EPA violations and compliance history
Lead Levels 90th percentile lead concentration vs EPA action level
Radon Risk EPA radon zone classification

Water Sources

George water systems draw from: Groundwater.

Lead & Copper

  • Average lead level (90th percentile): 0.0020 mg/L (EPA action level: 0.015 mg/L)
  • 0 ZIP codes exceed the EPA lead action level

Radon Risk

Dominant radon zone: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Top Contaminants

Contaminant Category Violations ZIPs Affected
Lead Inorganic 4 1
Surface Water Treatment Rule Treatment Technique 4 1

Areas with Most Violations

ZIP Code Safety Score Violations Health-Based System
98824 B 4 0 City of George

All ZIP Codes in George

  • 98824 [B] — 4 violations

Data Sources

Updated daily.

Health Outcomes in George

10.8%
Asthma (US: 9.8%)
11.5%
Diabetes (US: 10.4%)
17.8%
Poor Mental Health (US: 14.8%)

Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.

Compared to National Average

Asthma 10.8% ↑
Diabetes 11.5% ↑
Mental Health 17.8% ↑

Vertical line = national average. Above national · Below national

Top Contaminants in George Water

Lead 4 violations
Inorganic · EPA limit: 0.015 mg/L
Surface Water Treatment Rule 4 violations
Treatment Technique
Pathogens may not be adequately removed

Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.

Housing & Infrastructure in George

1969
Median Build Year
86%
Built Before 1986
49%
Built Before 1970
Galvanized Steel or Copper
Likely Pipe Material

With 86% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.

Source: U.S. Census Bureau American Community Survey (ACS).

Housing Age Profile

Because the majority of George's housing predates 1986, when lead solder was banned from new plumbing, the median build year of 1969 reflects a city where lead-era plumbing materials are common rather than exceptional.

1969
Median Year Built
86%
Pre-1986 (Lead Paint Risk)
49%
Pre-1970 (Lead Pipes Risk)
Pre-1970 (49%) 1970–1986 (37%) Post-1986 (14%)

Over half of homes in George were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.

Source: U.S. Census Bureau ACS B25034.

Cost Context: What Remediation Means for George Homeowners

What does remediation cost in financial context for George homeowners? Proportionally very little — the equity share here is low, and addressing documented issues is a manageable planning question rather than a material financial burden.

Median Home Value
$180,200
Est. Remediation
$400
Remediation as % of home value 0.2%

Remediation costs in George are relatively low compared to home values. The $0–$800 estimated range is a small fraction of median property value. Home values are 61% below the Washington average.

Lead Exposure Risk for Children in George

86%
Homes Built Before 1986
0.002
mg/L Avg Lead (Limit: 0.015)

Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.

When older housing represents 86% of the local inventory or aggregate readings approach the federal action level, an in-home check becomes the standard way to translate citywide averages into the specific reality of an individual George address.

Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.

Frequently Asked Questions

Is the water safe to drink in George, WA?
George has an average water safety score of 81/100 (Grade B). 4 EPA violations have been recorded. Check individual ZIP code reports for details specific to your neighborhood.
How many water violations does George have?
George water systems have a total of 4 EPA violations. Violations are tracked across 1 ZIP code.
Does George water have lead?
The average 90th-percentile lead level in George is 0.002 mg/L. This is below the EPA action level of 0.015 mg/L. Lead levels can vary by home — testing is recommended especially in older properties.
How does George compare to Washington average?
George has an average water safety score of 81/100, which is above the Washington state average of 78/100.
How many water systems serve George?
George is served by 1 public water system across 1 ZIP code, serving approximately 239 people.
How much does it cost to fix water issues in George?
Estimated remediation costs in George average $400 per household, ranging from $0 to $800. Costs include filtration, pipe replacement, radon mitigation, and flood protection.
HomeCitiesWashington → George, WA

Get safety alerts for George, Washington

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.