CITY REPORT TX

Seymour, TX: 3 Violations — 90/100 (2026)

1 ZIP code · 2 water systems · Updated 2026-06-03

In current tracking cycles, Seymour records above-average water quality outcomes for TX; compliance history over recent years shows few departures from federal standards and no systemic failures across its water systems.

How Seymour Compares

Seymour90/100
Texas avg82/100
National avg67/100

Data: EPA SDWIS Last verified: 2026-06-03

1
ZIP Codes
2
Water Systems
1
ZIPs with Violations
A · 90
Avg Safety Score
Zone 3
Radon Risk (Low)
$93K
Median Home Value
$1,200
Est. Remediation (1.3% of home value)

Seymour Water: The Quick Version

  • Your city's water systems recorded 3 violations in the past 5 years.
  • Average lead level: 0.006 mg/L.
  • Homes built before 1986: 82% — older plumbing may contain lead solder.
  • Estimated remediation: $1,200 per household.
  • CDC health risk index: 15.03 — above typical levels.

Water Systems Serving Seymour

Seymour, TX draws its residential water from 2 separate providers among the 2 federally tracked systems. Each operates independently, with its own infrastructure, rate structure, and compliance record.

Baylor Water Supply Corporation
Serves ~2,838 people · 3 violations
90
/100
City of Seymour
Serves ~2,576 people · 3 violations
90
/100

Overview

We track water quality and home safety data for 1 ZIP code in Seymour, Texas (population ~3,484), covering 2 community water systems serving approximately 5,414 people region-wide.

1 of 1 ZIP code (100%) have recorded EPA violations. All violations are monitoring/reporting type.

Home Safety Score

Average Home Safety Score for Seymour: A (90/100)

The score combines three factors:

Factor What It Measures
Water Quality EPA violations and compliance history
Lead Levels 90th percentile lead concentration vs EPA action level
Radon Risk EPA radon zone classification

Water Sources

Seymour water systems draw from: Groundwater.

Lead & Copper

  • Average lead level (90th percentile): 0.0060 mg/L (EPA action level: 0.015 mg/L)
  • 0 ZIP codes exceed the EPA lead action level

Radon Risk

Dominant radon zone: Zone 3 (Low Risk)

Top Contaminants

Contaminant Category Violations ZIPs Affected
Stage 1 DBP Rule Treatment Technique 2 1
Lead and Copper Rule Treatment Technique 2 1
Consumer Confidence Report Rule Reporting 2 1

Areas with Most Violations

ZIP Code Safety Score Violations Health-Based System
76380 A 3 0 Baylor Water Supply Corporation

All ZIP Codes in Seymour

  • 76380 [A] — 3 violations

Data Sources

Updated daily.

CDC Health Data for Seymour

10.3%
Asthma (US: 9.8%)
14.9%
Diabetes (US: 10.4%)
17.7%
Poor Mental Health (US: 14.8%)

Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.

Compared to National Average

Asthma 10.3% ↑
Diabetes 14.9% ↑
Mental Health 17.7% ↑

Vertical line = national average. Above national · Below national

Key Contaminants Detected in Seymour

Stage 1 DBP Rule 2 violations
Treatment Technique
Disinfection byproduct exposure risk
Lead and Copper Rule 2 violations
Treatment Technique
Developmental delays in children, kidney damage
Consumer Confidence Report Rule 2 violations
Reporting

Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.

How Old Is Seymour's Housing Stock?

1964
Median Build Year
82%
Built Before 1986
37%
Built Before 1970
Galvanized Steel or Copper
Likely Pipe Material

With 82% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.

Source: U.S. Census Bureau American Community Survey (ACS).

Housing Age Profile

What does a median build year of 1964 mean for water safety in Seymour? It means the majority of the city's residential plumbing was installed before 1986, when lead solder was federally banned, and a large share may predate 1970, when lead pipes were commonly used — making plumbing age a central variable in household-level lead risk across much of the city.

1964
Median Year Built
82%
Pre-1986 (Lead Paint Risk)
37%
Pre-1970 (Lead Pipes Risk)
Pre-1970 (37%) 1970–1986 (45%) Post-1986 (18%)

Over half of homes in Seymour were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.

Source: U.S. Census Bureau ACS B25034.

Seymour: Remediation Cost in Perspective

In Seymour, the equity share of documented remediation is meaningful enough to move the household financial perspective from routine maintenance into deliberate budgeting territory — the cost-to-value ratio is moderate, and most homeowners benefit from mapping the full scope against available budgets before committing.

Median Home Value
$93,300
Est. Remediation
$1,200
Remediation as % of home value 1.3%

Remediation costs are moderate relative to home values in Seymour. The estimated $800–$1,800 range is manageable for most homeowners but still worth budgeting for. Home values are 59% below the Texas average.

Protecting Children from Lead in Seymour

82%
Homes Built Before 1986
0.006
mg/L Avg Lead (Limit: 0.015)

Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.

If 82% of the Seymour inventory comes from before the federal ban on lead-bearing solder — and if utility samples sit at or near 0.015 mg/L — the gap between citywide averages and one specific faucet becomes a practical concern rather than a theoretical one. That is why one-home reads exist as a separate measurement. A certified filter through retailer networks addresses confirmed exposure where it appears in a household.

Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.

Climate-Related Water Risk for Seymour

NFIP records stretching across multiple decades show Seymour accumulating 3 claims and carrying 100% of its ZIP codes inside FEMA flood zones — evidence of meaningful exposure that extends beyond isolated incidents. The mechanisms linking flooding to water quality haven't changed: treatment facilities can be overwhelmed, wells can be infiltrated, and distribution systems can experience backflow. For a community at this exposure level, those mechanisms shift from hypothetical to periodically relevant.

3
Total FEMA Flood Claims
$7,534
Avg Claim Payout
100%
ZIPs in FEMA Flood Zones

Seymour has a moderate flood history with 3 FEMA claims averaging $7,534 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.

How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$1,200</strong> remediation cost per household.

Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.

Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.

Frequently Asked Questions

Is the water safe to drink in Seymour, TX?
Seymour has an average water safety score of 90/100 (Grade A). 3 EPA violations have been recorded. Check individual ZIP code reports for details specific to your neighborhood.
How many water violations does Seymour have?
Seymour water systems have a total of 3 EPA violations. Violations are tracked across 1 ZIP code.
Does Seymour water have lead?
The average 90th-percentile lead level in Seymour is 0.006 mg/L. This is below the EPA action level of 0.015 mg/L. Lead levels can vary by home — testing is recommended especially in older properties.
How does Seymour compare to Texas average?
Seymour has an average water safety score of 90/100, which is above the Texas state average of 82/100.
How many water systems serve Seymour?
Seymour is served by 2 public water systems across 1 ZIP code, serving approximately 3,484 people.
How much does it cost to fix water issues in Seymour?
Estimated remediation costs in Seymour average $1,200 per household, ranging from $800 to $1,800. Costs include filtration, pipe replacement, radon mitigation, and flood protection.
HomeCitiesTexas → Seymour, TX

Get safety alerts for Seymour, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.