CITY REPORT TX

Belton, TX: 4 Violations — 83/100 (2026)

1 ZIP code · 12 water systems · Updated 2026-06-03

Throughout Belton and across its water systems, EPA compliance data for TX shows above-average performance — violations are minimal, none of the tracked systems have recorded repeated MCL exceedances in recent cycles, and the safety picture has held steady across multiple reporting periods.

How Belton Compares

Belton83/100
Texas avg82/100
National avg67/100

Data: EPA SDWIS Last verified: 2026-06-03

1
ZIP Codes
12
Water Systems
1
ZIPs with Violations
B · 83
Avg Safety Score
Zone 3
Radon Risk (Low)
$260K
Median Home Value
$1,800
Est. Remediation (0.7% of home value)

Belton Water: The Quick Version

  • Your city's water systems recorded 4 violations in the past 5 years.
  • Average lead level: 0.002 mg/L.
  • Homes built before 1986: 33% — older plumbing may contain lead solder.
  • Estimated remediation: $1,800 per household.
  • CDC health risk index: 12.81 — above typical levels.

Water Systems Serving Belton

Federal drinking water records identify 12 systems in Belton, TX. The leading 3 providers serve the largest share of residential connections, each operating as a separate entity with its own rate authority, infrastructure management, and EPA compliance obligations — so service conditions are not uniform city-wide.

City of Killeen
Serves ~151,261 people · 4 violations
83
/100
City of Temple
Serves ~94,935 people · 4 violations
83
/100
City of Harker Heights
Serves ~34,834 people · 4 violations
83
/100

Overview

We track water quality and home safety data for 1 ZIP code in Belton, Texas (population ~44,855), covering 12 community water systems serving approximately 354,403 people region-wide.

1 of 1 ZIP code (100%) have recorded EPA violations. All violations are monitoring/reporting type.

Home Safety Score

Average Home Safety Score for Belton: B (83/100)

The score combines three factors:

Factor What It Measures
Water Quality EPA violations and compliance history
Lead Levels 90th percentile lead concentration vs EPA action level
Radon Risk EPA radon zone classification

Water Sources

Belton water systems draw from: Surface water.

Lead & Copper

  • Average lead level (90th percentile): 0.0020 mg/L (EPA action level: 0.015 mg/L)
  • 0 ZIP codes exceed the EPA lead action level

Radon Risk

Dominant radon zone: Zone 3 (Low Risk)

Top Contaminants

Contaminant Category Violations ZIPs Affected
Consumer Confidence Report Rule Reporting 4 1
Lead and Copper Rule Treatment Technique 2 1
Revised Total Coliform Rule Microbiological 2 1

Areas with Most Violations

ZIP Code Safety Score Violations Health-Based System
76513 B 4 0 City of Belton

All ZIP Codes in Belton

  • 76513 [B] — 4 violations

Data Sources

Updated daily.

CDC Health Data for Belton

10.7%
Asthma (US: 9.8%)
12.6%
Diabetes (US: 10.4%)
18.9%
Poor Mental Health (US: 14.8%)

Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.

Compared to National Average

Asthma 10.7% ↑
Diabetes 12.6% ↑
Mental Health 18.9% ↑

Vertical line = national average. Above national · Below national

Key Contaminants Detected in Belton

Consumer Confidence Report Rule 4 violations
Reporting
Lead and Copper Rule 2 violations
Treatment Technique
Developmental delays in children, kidney damage
Revised Total Coliform Rule 2 violations
Microbiological
Indicates possible bacterial contamination

Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.

How Old Is Belton's Housing Stock?

1991
Median Build Year
33%
Built Before 1986
8%
Built Before 1970
Copper
Likely Pipe Material

Housing age data helps assess potential lead pipe and infrastructure risks. Newer housing stock generally means lower plumbing-related contamination risk.

Source: U.S. Census Bureau American Community Survey (ACS).

Housing Age Profile

Two regulatory milestones define plumbing-era risk in residential housing: 1970, when lead pipes were still commonly installed for service lines, and 1986, when lead solder was banned from new copper plumbing. A median build year of 1991 places Belton in the middle zone between those thresholds — with a meaningful share of housing predating both cutoffs. The distribution shown above breaks out those eras explicitly, clarifying where concentrated risk sits across the residential inventory.

1991
Median Year Built
33%
Pre-1986 (Lead Paint Risk)
8%
Pre-1970 (Lead Pipes Risk)
Pre-1970 (8%) 1970–1986 (25%) Post-1986 (67%)

Most homes in Belton were built after 1986, reducing the risk of lead contamination from plumbing. Older homes should still be tested.

Source: U.S. Census Bureau ACS B25034.

Belton: Remediation Cost in Perspective

Within the Belton market, estimated remediation claims a small portion of typical property equity — the financial burden is proportionally low.

Median Home Value
$260,200
Est. Remediation
$1,800
Remediation as % of home value 0.7%

Remediation costs in Belton are relatively low compared to home values. The $1,200–$2,600 estimated range is a small fraction of median property value. Home values are 14% above the Texas average.

Protecting Children from Lead in Belton

33%
Homes Built Before 1986
0.002
mg/L Avg Lead (Limit: 0.015)

Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.

If 33% of the Belton inventory comes from before the federal ban on lead-bearing solder — and if utility samples sit at or near 0.015 mg/L — the gap between citywide averages and one specific faucet becomes a practical concern rather than a theoretical one. That is why one-home reads exist as a separate measurement. A certified filter through retailer networks addresses confirmed exposure where it appears in a household.

Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.

Climate-Related Water Risk for Belton

FEMA data shows 100% of Belton's ZIP codes mapped into designated flood zones, paired with an NFIP record of 56 claims. That footprint places local flood exposure in the range where it warrants attention without rising to high-severity planning territory.

56
Total FEMA Flood Claims
$16,404
Avg Claim Payout
100%
ZIPs in FEMA Flood Zones
~3
Est. Claims/Year

Belton has a moderate flood history with 56 FEMA claims averaging $16,404 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.

How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$1,800</strong> remediation cost per household.

Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.

Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.

Frequently Asked Questions

Is the water safe to drink in Belton, TX?
Belton has an average water safety score of 83/100 (Grade B). 4 EPA violations have been recorded. Check individual ZIP code reports for details specific to your neighborhood.
How many water violations does Belton have?
Belton water systems have a total of 4 EPA violations. Violations are tracked across 1 ZIP code.
Does Belton water have lead?
The average 90th-percentile lead level in Belton is 0.002 mg/L. This is below the EPA action level of 0.015 mg/L. Lead levels can vary by home — testing is recommended especially in older properties.
How does Belton compare to Texas average?
Belton has an average water safety score of 83/100, which is above the Texas state average of 82/100.
How many water systems serve Belton?
Belton is served by 12 public water systems across 1 ZIP code, serving approximately 44,855 people.
How much does it cost to fix water issues in Belton?
Estimated remediation costs in Belton average $1,800 per household, ranging from $1,200 to $2,600. Costs include filtration, pipe replacement, radon mitigation, and flood protection.
HomeCitiesTexas → Belton, TX

Get safety alerts for Belton, Texas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.