Water Quality in Wells Tannery, PA: 7 Violations — Grade C
Grade C · Score 57/100 · 1 water system · Updated 2026-05-03
Wells Tannery's water has moderate compliance issues. Residents in affected areas should consider filtration.
Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03
Tracked under the EPA Safe Drinking Water program, Wells Tannery, PA shows 7 water violations on file — findings that span multiple violation categories and are detailed system by system in the data grid further down the page.
Water Quality by ZIP Code in Wells Tannery
Water quality varies across Wells Tannery's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.
| ZIP Code | Grade | Score | Violations | Health | |
|---|---|---|---|---|---|
| 16691 | C | 57 | 7 | 0 | View report → |
Water Quality Overview
Wells Tannery, Pennsylvania receives a water quality grade of C with an overall score of 57 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).
The 1 water system serving Wells Tannery have accumulated 7 EPA violations (all monitoring/reporting type). These violations are tracked across 1 ZIP codes serving approximately 95 people.
What Grade C Means
A grade of C indicates moderate compliance issues. Wells Tannery's water systems have some violations that warrant attention. While the water may still be safe for most people, residents in affected ZIP codes should consider additional testing or filtration.
Lead Levels
Lead testing data for Wells Tannery is currently being collected. The EPA requires all community water systems to test for lead under the Lead and Copper Rule.
With 71% of homes built before 1986, Wells Tannery has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.
Radon Risk
Wells Tannery is in EPA Radon Zone 1 (High risk). The EPA recommends all homes in Zone 1 areas be tested for radon. Radon is the second leading cause of lung cancer after smoking.
Water Systems Serving Wells Tannery
Wells Tannery is served by 1 community water system regulated under the Safe Drinking Water Act. These systems collectively serve approximately 95 people across 1 ZIP codes.
Each water system is identified by a Public Water System ID (PWSID) and is required to:
- Test for over 90 regulated contaminants on a regular schedule
- Report results to the EPA and state regulators
- Issue an annual Consumer Confidence Report (CCR) to all customers
- Take corrective action when violations occur
The EPA has taken 10 enforcement actions against water systems serving Wells Tannery. Enforcement actions range from informal compliance assistance to formal orders and penalties.
How to Check Your Water in Wells Tannery
Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores
Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants
Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel
Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics
Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts
Contaminants Detected in Wells Tannery Water Systems
The following contaminants have been detected or caused violations across Wells Tannery's water systems:
| Contaminant | Category | MCL | Violations | ZIPs Affected | Health-Based |
|---|---|---|---|---|---|
| Revised Total Coliform Rule | Microbiological | N/A | 3 | 1 | No |
| Haloacetic Acids (HAA5) | Disinfection Byproducts | 0.06 mg/L | 2 | 1 | No |
| Total Organic Carbon | Disinfection Byproducts | N/A | 1 | 1 | No |
| Stage 1 DBP Rule | Treatment Technique | N/A | 1 | 1 | No |
MCL = Maximum Contaminant Level (EPA enforceable standard). Health-based violations indicate levels that may pose direct health risks.
EPA Enforcement History
The EPA and state regulators have taken 10 enforcement actions against water systems serving Wells Tannery. Recent actions:
| Date | Action Type |
|---|---|
| 2025-11-12 | State Filed Judgment |
| 2025-11-12 | State Informal Enforcement |
| 2023-06-23 | State Informal Action |
| 2023-06-23 | State Informal Action |
| 2023-06-23 | State Order Extension |
| 2023-05-31 | State Order Extension |
| 2023-05-23 | State Informal Action |
| 2023-04-21 | State Informal Action |
| 2023-04-21 | State Order Extension |
| 2023-04-17 | State Order Extension |
Enforcement actions range from informal compliance assistance to formal orders and penalties. The most recent action was on 2025-11-12.
Wells Tannery vs. Nearby Pennsylvania Cities
How Wells Tannery's water quality compares to similar cities in Pennsylvania:
| City | Grade | Violations | Systems | Population |
|---|---|---|---|---|
| Wells Tannery | C | 7 | 1 | 95 |
| Waterfall | D | 0 | 1 | 95 |
| Airville | D | 0 | 1 | 97 |
| Brogue | C | 0 | 1 | 97 |
Common Questions About Wells Tannery Water
These are the most common questions residents search for about water quality in Wells Tannery, Pennsylvania:
Is Wells Tannery water hard or soft? Water hardness varies by source. Wells Tannery's 1 water system uses a single source. Check your ZIP code report for specific hardness data.
Can I drink Wells Tannery tap water? Wells Tannery's water receives a grade of C (57/100). No health-based violations have been recorded, but home testing is always recommended.
What is the best water filter for Wells Tannery? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.
Wells Tannery vs. Pennsylvania Average
Understanding how Wells Tannery compares to the broader Pennsylvania average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.
To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Wells Tannery.
ZIP Codes in Wells Tannery
Wells Tannery spans 1 ZIP code. The ZIP with the lowest water quality score is 16691. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
- Enforcement: EPA ECHO database
- Filter recommendations: NSF/ANSI certified products
Updated daily.