Water Quality in Milford, PA: 38 Violations — Grade D
Grade D · Score 43/100 · 5 water systems · Updated 2026-05-03
Milford's water has significant violations. Water testing and filtration are recommended.
Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03
Looking at EPA compliance data for Milford, PA, the record shows 38 violations — findings that span health-based exceedances, monitoring lapses, and enforcement events tied to local utilities in the SDWIS database.
Water Quality by ZIP Code in Milford
Water quality varies across Milford's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.
| ZIP Code | Grade | Score | Violations | Health | |
|---|---|---|---|---|---|
| 18337 | C | 56 | 38 | 0 | View report → |
Water Quality Overview
Milford, Pennsylvania receives a water quality grade of D with an overall score of 43 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).
The 5 water systems serving Milford have accumulated 38 EPA violations (all monitoring/reporting type). These violations are tracked across 1 ZIP codes serving approximately 2,828 people.
What Grade D Means
A grade of D indicates significant compliance issues. Milford's water systems have accumulated violations that suggest ongoing water quality challenges. Residents should check their specific ZIP code report and consider water testing or filtration.
Lead Levels
Lead testing data for Milford is currently being collected. The EPA requires all community water systems to test for lead under the Lead and Copper Rule.
With 49% of homes built before 1986, Milford has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.
Radon Risk
Milford is in EPA Radon Zone 1 (High risk). The EPA recommends all homes in Zone 1 areas be tested for radon. Radon is the second leading cause of lung cancer after smoking.
Water Systems Serving Milford
Milford is served by 5 community water systems regulated under the Safe Drinking Water Act. These systems collectively serve approximately 2,828 people across 1 ZIP codes.
Each water system is identified by a Public Water System ID (PWSID) and is required to:
- Test for over 90 regulated contaminants on a regular schedule
- Report results to the EPA and state regulators
- Issue an annual Consumer Confidence Report (CCR) to all customers
- Take corrective action when violations occur
The EPA has taken 10 enforcement actions against water systems serving Milford. Enforcement actions range from informal compliance assistance to formal orders and penalties.
How to Check Your Water in Milford
Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores
Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants
Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel
Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics
Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts
Contaminants Detected in Milford Water Systems
The following contaminants have been detected or caused violations across Milford's water systems:
| Contaminant | Category | MCL | Violations | ZIPs Affected | Health-Based |
|---|---|---|---|---|---|
| Surface Water Treatment Rule | Treatment Technique | N/A | 3 | 1 | No |
| Revised Total Coliform Rule | Microbiological | N/A | 3 | 1 | No |
| Haloacetic Acids (HAA5) | Disinfection Byproducts | 0.06 mg/L | 2 | 1 | No |
| Lead and Copper Rule | Treatment Technique | N/A | 2 | 1 | No |
| Fecal Coliform | Microbiological | N/A | 1 | 1 | No |
| Stage 1 DBP Rule | Treatment Technique | N/A | 1 | 1 | No |
| Copper | Inorganic | 1.3 mg/L | 1 | 1 | No |
MCL = Maximum Contaminant Level (EPA enforceable standard). Health-based violations indicate levels that may pose direct health risks.
EPA Enforcement History
The EPA and state regulators have taken 10 enforcement actions against water systems serving Milford. Recent actions:
| Date | Action Type |
|---|---|
| 2025-11-12 | State Informal Enforcement |
| 2025-11-12 | State Filed Judgment |
| 2025-11-12 | State Order Extension |
| 2025-10-28 | State Informal Enforcement |
| 2025-10-28 | State Informal Action |
| 2025-10-27 | State Informal Enforcement |
| 2025-10-27 | State Filed Judgment |
| 2025-10-27 | State Informal Action |
| 2025-10-09 | State Informal Action |
| 2025-10-09 | State Informal Enforcement |
Enforcement actions range from informal compliance assistance to formal orders and penalties. The most recent action was on 2025-11-12.
Milford vs. Nearby Pennsylvania Cities
How Milford's water quality compares to similar cities in Pennsylvania:
| City | Grade | Violations | Systems | Population |
|---|---|---|---|---|
| Milford | D | 38 | 5 | 2,828 |
| Claysburg | C | 3 | 2 | 2,800 |
| Hughesville | F | 26 | 1 | 2,800 |
| Lairdsville | D | 0 | 1 | 2,800 |
Common Questions About Milford Water
These are the most common questions residents search for about water quality in Milford, Pennsylvania:
Is Milford water hard or soft? Water hardness varies by source. Milford's 5 water systems use multiple sources. Check your ZIP code report for specific hardness data.
Can I drink Milford tap water? Milford's water receives a grade of D (43/100). No health-based violations have been recorded, but home testing is always recommended.
What is the best water filter for Milford? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.
Milford vs. Pennsylvania Average
Understanding how Milford compares to the broader Pennsylvania average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.
To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Milford.
ZIP Codes in Milford
Milford spans 1 ZIP code. The ZIP with the lowest water quality score is 18337. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
- Enforcement: EPA ECHO database
- Filter recommendations: NSF/ANSI certified products
Updated daily.