LEAD RISK PA EXCEEDS EPA LIMIT

Lead in Water in Blakeslee, PA: Exceeds EPA Limit

Avg lead: 0.0169 mg/L · EPA limit: 0.015 mg/L · Updated 2026-05-03

Key fact: Lead contamination comes from YOUR HOME PIPES, not the treatment plant. Even safe water can pick up lead from older plumbing.

Data: EPA Lead and Copper Rule, U.S. Census Bureau (ACS) Last verified: 2026-05-03

How does Blakeslee's lead data stand relative to the federal threshold? The city-wide aggregate is 0.0169 mg/L — a figure that crosses the action level and brings mandatory utility obligations with it. Risk within the city is not uniformly distributed: housing constructed before 1986 carries higher intrinsic exposure from legacy plumbing materials, and individual tap concentrations in older properties frequently exceed what the community-wide figure reflects.

0.0169 mg/L
Avg Lead Level (90th %ile)
1
ZIPs Exceeding EPA Limit
59
Lead Exposure Score
40%
Pre-1986 Housing
1980
Median Build Year
1
ZIP Codes Monitored

Lead Risk Overview

The average 90th percentile lead level in Blakeslee, Pennsylvania is 0.0169 mg/L. The EPA action level is 0.015 mg/L (15 parts per billion). This exceeds the EPA limit, indicating that corrective action is required under the Lead and Copper Rule.

Housing Age and Lead Risk

Lead plumbing solder was banned in 1986. Homes built before this date may have lead in:

  • Solder joints connecting copper pipes
  • Lead service lines connecting the water main to the home
  • Brass fixtures and faucets containing up to 8% lead (pre-2014)

In Blakeslee:

Factor Value
Pre-1986 housing 40%
Median build year 1980
Median household income $64,875
Population 490

A moderate proportion of Blakeslee's housing was built before the 1986 lead solder ban. Residents in older neighborhoods should consider water testing, especially if they notice discolored water or live in homes with original plumbing.

Health Effects of Lead Exposure

Lead exposure is a serious public health concern with no safe level identified by the CDC:

Children (under 6):

  • Developmental delays and learning difficulties
  • Reduced IQ and attention span
  • Behavioral problems
  • Slowed growth

Adults:

  • Kidney damage
  • High blood pressure
  • Reproductive issues
  • Nerve disorders

Pregnant women are especially at risk — lead crosses the placenta and affects fetal development.

Three-Source Lead Data Confirmation

Lead risk is best understood by combining multiple data sources:

Source Data Point Value
EPA Lead & Copper Rule 90th percentile lead level 0.0169 mg/L (EXCEEDS 0.015 limit)
Consumer Confidence Report Reported lead (90th %ile) CCR data not available

Cross-referencing multiple sources provides a more complete picture of lead risk than any single dataset.

Lead Service Line Replacement (LSLR)

The EPA's revised Lead and Copper Rule (LCRR) requires all water systems to create a service line inventory by October 2024 and replace lead service lines within 10 years. Blakeslee's water system is subject to these requirements.

Federal funding for Pennsylvania:

Metric Value
FY2025 LSLR allotment $135.4M
Additional subsidy 49% available as grants/forgiveness
National total $3.0B

This funding is available through the Drinking Water State Revolving Fund (DWSRF) for lead service line inventory and replacement projects in Pennsylvania.

To check if your home has a lead service line:

  1. Check your water utility's service line inventory (required to be publicly available)
  2. Inspect where the pipe enters your home — lead pipes are dull gray and can be scratched with a key
  3. Contact your water utility for a free service line inspection

Lead & Copper Rule Compliance Trend

EPA violations for water systems serving Blakeslee over time:

Year Total Violations Health-Based
2023 1 1
2024 1 1

Over the 2-year period, Blakeslee has recorded 2 total violations (2 health-based).

Lead Risk by Housing Decade

The age of a home is one of the strongest predictors of lead risk in drinking water:

Construction Era Lead Risk Level Key Concern
Before 1940 Very High Lead pipes, lead solder, lead paint
1940–1959 High Lead solder common, some lead pipes
1960–1978 Moderate-High Lead solder, lead paint (banned 1978)
1979–1986 Moderate Lead solder still legal until 1986
1987–2013 Low-Moderate "Lead-free" = up to 8% lead in brass
2014+ Low Reduction of Lead in Drinking Water Act (0.25% max)

With a median build year of 1980, the typical home in Blakeslee falls in the moderate risk category for lead in plumbing. 40% of homes were built before the 1986 lead solder ban.

How to Test for Lead in Blakeslee

DIY Test Kits ($20–$50)

  • Available at hardware stores and online
  • Collect a "first-draw" sample (water sitting in pipes 6+ hours)
  • Send to an EPA-certified lab for analysis
  • Results typically in 1–2 weeks

Professional Lab Testing ($150–$400)

  • Comprehensive panel: lead, copper, bacteria, nitrates, and more
  • Certified technician collects samples
  • Best for homes built before 1986 or after a plumbing change

Free Testing Options

  • Many water utilities offer free lead testing — call your provider
  • Some states offer free testing for homes with children under 6
  • Check your annual Consumer Confidence Report (CCR) for system-wide results

What to Expect

  • Below 0.005 mg/L (5 ppb): Low concern
  • 0.005–0.015 mg/L (5–15 ppb): Consider filtration, especially with children
  • Above 0.015 mg/L (15 ppb): Exceeds EPA action level — take immediate action
  • Above 0.040 mg/L (40 ppb): Use bottled water while addressing the source

How to Reduce Lead Exposure

  1. Flush your pipes — run cold water for 2+ minutes before drinking, especially in the morning
  2. Use cold water for cooking and baby formula (hot water dissolves more lead)
  3. Install a certified filter — look for NSF/ANSI Standard 53 certification for lead removal
  4. Get your water tested — EPA-certified kits cost $20–$50
  5. Replace lead service lines — check with your utility about replacement programs

Most Affected Areas

The ZIP code with the highest lead levels in Blakeslee is 18610. Check your specific ZIP code for detailed lead testing results.

Data Sources

  • Lead levels: EPA Lead and Copper Rule sampling data
  • Housing data: U.S. Census Bureau American Community Survey (ACS)
  • Health information: CDC and EPA public health guidelines
  • Blood lead surveillance: CDC Childhood Blood Lead Surveillance (CBLS)
  • LSLR funding: EPA DWSRF Lead Service Line Replacement allotments

Updated daily.

Lead Risk by ZIP Code in Blakeslee

Lead risk varies across Blakeslee's 1 ZIP codes based on housing age, water system, and testing results.

ZIP Code Grade Score Violations
18610 D 40/100 12 View report →

Frequently Asked Questions

Does Blakeslee have lead in the water?
Yes — Blakeslee's average lead level is 0.0169 mg/L, which exceeds the EPA action level of 0.015 mg/L. 1 ZIP code exceeds the limit. Water testing is strongly recommended.
How old are homes in Blakeslee?
40% of homes in Blakeslee were built before 1986, when lead solder was banned in plumbing. The median build year is 1980. Older homes have higher risk of lead pipes and fixtures.
Should I test my water for lead in Blakeslee?
Yes — the EPA recommends testing regardless of city-level data because lead contamination comes from your home pipes, not the water treatment plant. DIY test kits cost $20-$50. Professional lab testing costs $150-$400 and is more accurate.
How many ZIP codes in Blakeslee exceed the EPA lead limit?
1 of 1 monitored ZIP codes in Blakeslee have lead levels above the EPA action level of 0.015 mg/L (15 ppb). Check your specific ZIP code report for details.
What is the lead exposure score for Blakeslee?
Blakeslee has a lead exposure score of 59, calculated from water lead levels, housing age, and the percentage of pre-1986 homes. Higher scores indicate greater community-wide lead exposure risk.
HomeCitiesPennsylvaniaBlakeslee, PA → Lead Risk

Get safety alerts for Blakeslee, Pennsylvania

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.