CITY REPORT OH

Ashville, OH: 7 Violations — 66/100 (2026)

1 ZIP code · 3 water systems · Updated 2026-06-03

Compliance figures for Ashville indicate average water quality in OH overall — some service areas have recorded health-based violations in recent monitoring cycles, while others operate cleanly, making system-level data the most actionable reference point for residents.

How Ashville Compares

Ashville66/100
Ohio avg60/100
National avg67/100

Data: EPA SDWIS Last verified: 2026-06-03

1
ZIP Codes
3
Water Systems
1
ZIPs with Violations
C · 66
Avg Safety Score
Zone 1
Radon Risk (High)
$237K
Median Home Value
$3,000
Est. Remediation (1.3% of home value)

Key Facts for Ashville Residents

  • Your city's water systems recorded 7 violations in the past 5 years.
  • Average lead level: 0.0055 mg/L.
  • Homes built before 1986: 46% — older plumbing may contain lead solder.
  • Estimated remediation: $3,000 per household.
  • CDC health risk index: 14.4 — above typical levels.

Ashville's Water Providers

Federal records list 3 water systems tied to Ashville, OH. Of those, 3 are the primary providers, meaning service conditions, rate structures, and compliance histories can differ depending on where a property sits.

COLUMBUS PUBLIC WATER SYSTEM
Serves ~1,305,946 people · 7 violations
66
/100
Ashville Village Public Water System
Serves ~4,298 people · 7 violations
66
/100
Commercial Point Village
Serves ~3,497 people · 7 violations
66
/100

Overview

We track water quality and home safety data for 1 ZIP code in Ashville, Ohio (population ~12,981), covering 3 community water systems serving approximately 1,313,741 people region-wide.

1 of 1 ZIP code (100%) have recorded EPA violations. All violations are monitoring/reporting type.

Home Safety Score

Average Home Safety Score for Ashville: C (66/100)

The score combines three factors:

Factor What It Measures
Water Quality EPA violations and compliance history
Lead Levels 90th percentile lead concentration vs EPA action level
Radon Risk EPA radon zone classification

Water Sources

Ashville water systems draw from: Groundwater.

Lead & Copper

  • Average lead level (90th percentile): 0.0055 mg/L (EPA action level: 0.015 mg/L)
  • 0 ZIP codes exceed the EPA lead action level

Radon Risk

Dominant radon zone: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Top Contaminants

Contaminant Category Violations ZIPs Affected
Surface Water Treatment Rule Treatment Technique 6 1
Lead and Copper Rule Treatment Technique 4 1
Total Coliform Microbiological 2 1
Consumer Confidence Report Rule Reporting 2 1

Areas with Most Violations

ZIP Code Safety Score Violations Health-Based System
43103 C 7 0 Ashville Village Public Water System

All ZIP Codes in Ashville

  • 43103 [C] — 7 violations

Data Sources

Updated daily.

Ashville Community Health Snapshot

11%
Asthma (US: 9.8%)
12.6%
Diabetes (US: 10.4%)
18.5%
Poor Mental Health (US: 14.8%)

Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.

Compared to National Average

Asthma 11% ↑
Diabetes 12.6% ↑
Mental Health 18.5% ↑

Vertical line = national average. Above national · Below national

What's in Ashville's Water?

Surface Water Treatment Rule 6 violations
Treatment Technique
Pathogens may not be adequately removed
Lead and Copper Rule 4 violations
Treatment Technique
Developmental delays in children, kidney damage
Total Coliform 2 violations
Microbiological
Indicates possible pathogenic contamination

Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.

Ashville Infrastructure Age

1981
Median Build Year
46%
Built Before 1986
26%
Built Before 1970
Copper
Likely Pipe Material

With 46% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.

Source: U.S. Census Bureau American Community Survey (ACS).

Housing Age Profile

Lead solder was a standard plumbing material before 1986, when federal law prohibited its use in new residential construction. In Ashville, the median build year of 1981 indicates that plumbing age is a material factor in local lead risk — with the pre-1986 share concentrated in specific neighborhoods and building types where older construction remains common.

1981
Median Year Built
46%
Pre-1986 (Lead Paint Risk)
26%
Pre-1970 (Lead Pipes Risk)
Pre-1970 (26%) 1970–1986 (20%) Post-1986 (54%)

Most homes in Ashville were built after 1986, reducing the risk of lead contamination from plumbing. Older homes should still be tested.

Source: U.S. Census Bureau ACS B25034.

How Remediation Costs Compare in Ashville

The equity impact of remediation in Ashville sits at a moderate level — real enough to plan for, within reach for most.

Median Home Value
$236,900
Est. Remediation
$3,000
Remediation as % of home value 1.3%

Remediation costs are moderate relative to home values in Ashville. The estimated $2,000–$4,000 range is manageable for most homeowners but still worth budgeting for. Home values are 29% above the Ohio average.

Ashville: Lead Risk & Vulnerable Populations

46%
Homes Built Before 1986
0.0055
mg/L Avg Lead (Limit: 0.015)

Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.

Older interior plumbing shapes the local picture: 46% of Ashville homes predate the federal solder ban, and aggregate sampling either approaches or crosses the action benchmark. That mix makes a single-home draw a standard pre-purchase or pre-occupancy step.

Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.

Ashville: Flood History & Water Damage Risk

The NFIP claim record for Ashville — 3 filed incidents — reflects genuine, recurring flood exposure rather than an isolated event or two. When a community accumulates flood claims at this volume and carries 100% of its ZIP codes inside FEMA-designated zones, flood history starts to factor into water quality planning in ways it doesn't for lower-exposure areas. Flooding introduces specific contamination pathways — runoff overwhelming treatment facility intake, surface water infiltrating private wells, and pressure disruptions in distribution systems allowing backflow — all of which become more relevant as flood frequency increases.

3
Total FEMA Flood Claims
100%
ZIPs in FEMA Flood Zones

Ashville has a moderate flood history with 3 FEMA claims. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.

How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$3,000</strong> remediation cost per household.

Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.

Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.

What You Can Do in Ashville

  1. Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
  2. Install a certified water filter. Filters rated for Surface Water Treatment Rule can reduce the most common contaminant found in Ashville's water.
  3. Check your home's plumbing. With 46% of homes built before 1986, lead solder is a real possibility.

Frequently Asked Questions

Is the water safe to drink in Ashville, OH?
Ashville has an average water safety score of 66/100 (Grade C). 7 EPA violations have been recorded. Check individual ZIP code reports for details specific to your neighborhood.
How many water violations does Ashville have?
Ashville water systems have a total of 7 EPA violations. Violations are tracked across 1 ZIP code.
Does Ashville water have lead?
The average 90th-percentile lead level in Ashville is 0.0055 mg/L. This is below the EPA action level of 0.015 mg/L. Lead levels can vary by home — testing is recommended especially in older properties.
How does Ashville compare to Ohio average?
Ashville has an average water safety score of 66/100, which is above the Ohio state average of 60/100.
How many water systems serve Ashville?
Ashville is served by 3 public water systems across 1 ZIP code, serving approximately 12,981 people.
How much does it cost to fix water issues in Ashville?
Estimated remediation costs in Ashville average $3,000 per household, ranging from $2,000 to $4,000. Costs include filtration, pipe replacement, radon mitigation, and flood protection.
HomeCitiesOhio → Ashville, OH

Get safety alerts for Ashville, Ohio

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.